Abrasive Wear of Alloyed Cast Steels Applied for Heavy Machinery

• Autorzy: Studnicki A. , Kondracki M. , Suchoń J. , Szajnar J. , Bartocha D. , Wróbel T.

Identyfikatory

DOI

10.1515/afe-2015-0018

• Języki publikacji: EN

Abstrakty

EN

In the paper the results and analysis of abrasive wear studies were shown for two grades of cast steels: low-alloyed cast steel applied for heavy machinery parts such as housing, covers etc. and chromium cast steels applied for kinetic nodes of pin-sleeve type. Studies were performed using the modified in Department of Foundry pin-on-disc method.

Słowa kluczowe

EN

low alloyed cast steel; chromium cast steel; abrasive wear; pin on disc method

PL

staliwo niskostopowe; staliwo chromowe; zużycie ścierne; metoda "pin on disc"

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2015
• Tom: Vol. 15, iss. 1
• Strony: 99--104
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr.

Twórcy

autor

Studnicki A.

• Department of Foundry, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Kondracki M.

• Department of Foundry, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Suchoń J.

• Department of Foundry, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Szajnar J.

• Department of Foundry, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Bartocha D.

• Department of Foundry, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Wróbel T.

• Department of Foundry, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

Bibliografia

• [1] Kniaginin, G. (1972). Cast steel. Metallurgy and Founding. Katowice: Publisher Śląsk.
• [2] Sakwa, W., Jura, S., Sakwa, J. (1980). Wear Resistance Iron Alloys. Part II Cast Steel. Kraków: Publisher ZG STOP.
• [3] Kondracki, M., Studnicki, A. & Szajnar, J. (2013). Corrosion Studies of High-Chromium Cast Steels applied for Heavy Machinery Parts. Ochrona przed Korozją (Corrosion Protection). 12. 574-579.
• [4] Kondracki, M., Studnicki, A. & Szajnar, J. (2014). Influence of Carburising and Heat Treatment Operation on Selective Corrosion of Chromium Cast Steels. Ochrona przed Korozją (Corrosion Protection). 5, 174-178.
• [5] Dobrzański, L.A. (2004). Metal Engineering Materials. Warszawa: Publisher WNT.
• [6] Głownia, J. (2002). Castings from Alloyed Cast Steel. Kraków: Application. Publisher Fotobit.
• [7] PN-88/H-83160 Standard: Abrasive Resistant Cast Steel.
• [8] PN-87/H-83156 Standard: Constructional Cast Steel.
• [9] PN-EN 10340 Standard: Cast Steel Castings for Construction Application.
• [10] PN-EN 10293 Standard: Cast Steel Castings for General Purposes.
• [11] Studnicki, A., Kondracki, M. & Szajnar, J. (2012). Primary Crystallization of High Chromium Cast Steel in Metastable Conditions. Archives of Foundry Engineering. 12(spec.2), 59-66.
• [12] Studnicki, A., Kondracki, M., Szajnar, J. & Wróbel, T. (2013). Crystallization of Low-Alloyed Construction Cast Steel Modified with V and Ti. Archives of Foundry Engineering. 13(3). 92-96.
• [13] Szajnar, J., Studnicki, A, Głownia, J., Kondracki, M., Suchoń, J. & Wróbel, T. (2013). Technological Aspects of Low-Alloyed Cast Steel Massive Casting Manufacturing, Archives of Foundry Engineering. 13(4). 97-102.
• [14] Studnicki, A., Kondracki, M., Szajnar, J. (2013). Primary Crystallization of Chromium Cast Steel in Metastable Conditions, Metal 2013; Conference Proceedings, p. 669-675.