Effect of Selected Alloying Elements on the Soft-Magnetic and Mechanical Properties of Injection-Cast Fe61Co10Y8Me1B20 Alloys (Me = Nb, W or Mo)

• Autorzy: Pietrusiewicz P. , Nabiałek M.

Identyfikatory

DOI

10.24425/118909

• Języki publikacji: EN

Abstrakty

EN

Properties of amorphous alloys differ from each other when they are produced at different cooling rates and from different chemical compositions. This paper presents studies of the magnetic and mechanical properties of Fe₆₁Co₁₀ Y₈ Nb₁ B₂₀, Fe₆₁ Co₁₀ Y₈ -W₁ B₂₀ and Fe₆₁ Co₁₀ Y₈ Mo₁ B₂₀ alloys, in the form of plates, produced by the injection of liquid alloy into a copper mould. Based on the performed studies, it was found that the substitution of 1% non-magnetic additive into the alloy composition had little effect, as regards the values of saturation magnetization (M_s ) and Curie temperature (T_c ). However, in the case of the coercive field, the sample with the W addition had a value almost half that of the other two alloys. For all of the studied alloys, the microhardness was about 1180 μHv100, i.e. significantly higher than for the same materials in the crystalline state.

Słowa kluczowe

EN

magnetic properties; mechanical properties; abrasion resistance; microhardness; Curie temperature

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 1
• Strony: 61--64
• Opis fizyczny: Bibliogr. 23 poz., rys., tab.

Twórcy

autor

Pietrusiewicz P.

• Częstochowa University of Technology, Institute of Physics, 69 Dąbrowskiego Str., 42-201 Częstochowa, Poland

autor

Nabiałek M.

• Częstochowa University of Technology, Institute of Physics, 69 Dąbrowskiego Str., 42-201 Częstochowa, Poland

Bibliografia

• [1] R. W. Cahn, Rapidly solidified alloy, in: H.H. Libermann (Ed.), New York: Marcel Dekker Inc. (1993).
• [2] H. Davies, M. Gibbs, Soft Magnetic Materials, in: K. Kronmuller, S. Parkin (Ed.) Handbook of Magnetism and advanced materials vol. 4. London: John Wiley&Sons; (2007).
• [3] Y. Yoshizawa, S. Oguma, K. Yamauchi, J. Appl. Phys. 64, 6044 (1988).
• [4] Y. Yoshizawa, K. Yamauchi, Mater. T. JIM 31, 307 (1990).
• [5] G. Herzer, Acta Mater. 61, 718 (2013).
• [6] M. Yousefi, Kh. Rahmani, M.S. Amiri Kerahroodi, J. Magn. Magn. Mater. 420, 204 (2016).
• [7] A. Inoue, Mater. Sci. Eng. A304-306, 1 (2001).
• [8] A. Inoue, Acta Mater. 48, 279 (2000).
• [9] A. Inoue, Mater. T. JIM 36 (7), 866 (1995).
• [10] P . Pietrusiewicz, M. Nabiałek, M. Dośpiał, K. Gruszka, K. Błoch, J. Gondro, P. Brągiel, M. Szota, Z. Stradomski, J. Alloy Compd. 615, S67 (2014).
• [11] Zubair Ahmad, Mi Yan, Shan Tao, Zhongwu Liu, J. Magn. Magn. Mater. 332, 1 (2013).
• [12] L. Y. S heng, J. T. Guo, H. Q. Ye, Materials and Design 30, 964 (2009).
• [13] ZHAN Y uyong, PAN Jing, JIANG Xiaoli, LIU Xincai, DONG Youren, XIAO Xiaoyan, J. Rare Earth. 33 (10), 1081 (2015).
• [14] J. Hosko, I. Janotova, P. Svec, D. Janickovic, G. Vlasak, E. Illekova, I. Matko, P. Svec Sr., J. Non-Cryst. Solids 358, 1545 (2012).
• [15] Kagan Sarlar, Ilker Kucuk, J. Magn. Magn. Mater. 374, 607 (2015).
• [16] Hossei n Asghari Shivaee, A. Castellero, P. Rizzi, P. Tiberto, Hamid Reza Madaah Hosseini, M. Baricco, Met. Mater. Int. 19 (4), 643 (2013).
• [17] W. H. Wang, Roles of minor additions in formation and properties of bulk metallic glasses, Prog. Mater. Sci. 52, 540 (2007).
• [18] A. P. Cracknell, Magnetism in Crystalline Materials, Pergamon Press, Oxford, 1975.
• [19] X. Yang, X. Ma, Q. Li, S. Guo, J. Alloy Compd. S54, 446 (2013).
• [20] M. Nabiałek, P. Pietrusiewicz, M. Dośpiał, M. Szota, J. Gondro, K. Gruszka, A. Dobrzańska-Danikiewicz, S. Walters, A. Bukowska, J. Alloy Compd. 615, S56 (2014).
• [21] M. Nabiałek, P. Pietrusiewicz, K. Błoch, J. Alloy Compd. 628, 424 (2015).
• [22] M. Nabiałek, A. Dobrzańska-Danikiewicz, P. Pietrusiewicz, Z. Stradomski, M. Dośpiał, M. Szota, J. Gondro, S. Lesz, Acta. Phys. Pol. A 126, 112 (2014).
• [23] T. Egami, Interm etallics 14, 882 (2006).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).