The stapling of material layers process capability study by the production of the product "MULTIAXIAL"

• Autorzy: Lestyanszka-Skurkova K.
• Języki publikacji: EN

Abstrakty

EN

Ensuring the process capability currently means the warranty, that produced products will be in accordance with requirements - from the company or customer´s side. This study focuses on the statistics control of stapling of material layers process capability by production of the product "multiaxial". The stapling of material layers process is evaluated by control charts, specifically by control charts for average and range(, R). As the results show, on the basis of the diagram for average and range we are able to say that the process is under the statistical control. We had also finished the reguest for capability of process, where the indexes of capability process Cp and Cpk are higher than the determinated value by 1,33 points. The obtained values are: Cp = 1,68 a Cpk = 1,55. X

Słowa kluczowe

EN

process; stability; normality; capability; stapling

PL

proces; stabilność; normalność; zdolność; zszywanie

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2015
• Tom: Vol. 6, No. 1
• Strony: 10--13
• Opis fizyczny: Bibliogr. 5 poz., rys., tab.

Twórcy

autor

Lestyanszka-Skurkova K.

• Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Institute of Safety, Environment and Quality, Botanická 49, 917 24 Trnava

Bibliografia

• 1. Hrubec, J.: Riadenie kvality. Nitra: SPU v Nitre, 2001. s. 203. ISBN 80-7137-849-6.
• 2. Hrubec, J. Krchnák, P. Lestyánszka, K.: Inžinierstvo kvality produkcie. 1. Vyd., Vydavateľstvo SPU v Nitre, Nitra, 2014, 166 s. ISBN 978-80-552-1174-9.
• 3. Hrubec J., Virčíková, E: Integrovaný manažérsky systém. Nitra: SPU v Nitre, 2009. s.543. ISBN 978-80-552-0231-0.
• 4. Kučerová, M. – Lestyánszka, K.: Štatistické metódy kontroly kvality. 1. Vyd., Trnava: AlumniPress MTF STU, 2011, 150 s. ISBN 978-80-8096-146-6.
• 5. Klokner, P.: Analýza štatistickej regulácie procesov v tkáčovni a sledovanie spôsobilosti výrobného zariadenia LIBA v DIPEX, spol. s r.o.. Bakalárska práca. MTF STU so sídlom v Trnave, 2011.