Boride Layer Growth Kinetics of AISI H13 Steel Borided with Nano-Sized Powders

• Autorzy: Karakaş M. S. , Günen A. , Kanca E. , Yilmaz E.

Identyfikatory

DOI

10.24425/118923

• Języki publikacji: EN

Abstrakty

EN

Growth kinetics of boride layers in AISI H13 steel was investigated using the pack boriding method at temperatures of 1073, 1173 and 1273 K (800°C, 900°C and 1000°C) for periods of 2, 4 and 6 h with nano-sized boron (NB) and micron-sized Ekabor II powders as boriding agents. The total thickness of the boride layer (including both FeB and Fe₂B) after boriding at 1273 K (1000°C) for 6 h was 103.8 μm and 96.5 μm for the NB and Ekabor II specimens, respectively. X-ray diffraction analysis of the boride layers on the surfaces borided with NB and Ekabor II revealed the presence of FeB and Fe₂B phases with sawtooth morphology. The FeB/Fe₂B volume ratio was higher in the specimens borided with NB. The thickness of the boride layer (FeB + Fe₂B) increased with the increasing boriding temperature and time. The FeB layer in the NB specimen displayed a (002) preferred orientation.

Słowa kluczowe

EN

boriding; growth kinetics; activation energy

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 1
• Strony: 159--165
• Opis fizyczny: Bibliogr. 28 poz., rys., tab., wzory

Twórcy

autor

Karakaş M. S.

• Selcuk University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, Konya 42130, Turkey

autor

Günen A.

• Iskenderun Technical University, Faculty of Engineering and Natural Sciences, Department of Metallurgical and Materials Engineering, Hatay 31200, Turkey

autor

Kanca E.

• Iskenderun Technical University, Faculty of Engineering and Natural Sciences, Department of Mechanical Engineering, Hatay 31200, Turkey

autor

Yilmaz E.

• Cankaya University, Faculty of Engineering, Department of Materials Science and Engineering, Ankara 06790, Turkey

Bibliografia

• [1] A. K. Sinha, Boriding (boronizing) of metals in: ASM Handbook Volume 4 Heat Treating 1991 ASM, Metals Park, OH.
• [2] J. R. Davis, Surface Hardening Of Steels: Understanding the Basics, 2002 ASM, Metals Park, OH.
• [3] F. C. Campbell, Elements of Metallurgy and Engineering Alloys, 2008 ASM, Metals Park, OH.
• [4] V. I. Dybkov, J. Mater. Sci. 42, 6614-6627 (2007).
• [5] W. Fichtl, Mater. Des. 2, 276-286 (1981).
• [6] H. A. M. Yusof, I. Jauhari, S. Rozali, O. Hiroyuki, Key Eng. Mater. 345-346, 601-604 (2007).
• [7] C. Meriç, S. Sahin, S. S. Yilmaz, Mater. Res. Bull. 35, 2165-2172 (2000).
• [8] A. Calik, ISIJ Int. 53, 160-164 (2013).
• [9] L. G. Yu, X. J. Chen, K. A. Khor, G. Sundararajan, Acta Mater. 53, 2361-2368 (2005).
• [10] B. Jonsson, S. Hogmark, Thin Solid Films 114, 257-269 (1984).
• [11] H. Kunst, O. Schaaber, Härt.-Tech. Mitt. 22, 275-292 (1967).
• [12] G. Palombarini, M. Carbucicchio, J. Mater. Sci. Lett. 6, 415-416 (1987).
• [13] E. Campos-Silva, G. A. Rodríguez-Castro, Boriding To Improve The Mechanical Properties And Corrosion Resistance Of Steels in: J. Mittemeijer and Marcel A. J. Somers (Eds.), Thermochemical Surface Engineering Of Steels, 2015 Woodhead, Cambridge, UK.
• [14] M. Keddam, M. Ortiz-Dominguez, M. Elias-Espinosa, O. Damian-Mejia, A. Arenas-Flores, O.A. Gomez-Vargas , M. Abreu-Quijano, J. I. Aldana-Gonzalez, J. Zuno-Silva, Trans. Indian Inst. Met. 68, 433-442 (2015).
• [15] Y. Boonplook, P. Juijerm, Adv. Mater. Res. 931-932, 296-300 (2014).
• [16] H. Yang, X. Wu, Z. Yang, S. Pu, H. Wang, J. Alloys Compd. 590, 388-395 (2014).
• [17] K. Genel, Vacuum 80, 451-457 (2006).
• [18] I. Ozbek, C. Bindal, Vacuum 86, 391-397 (2011).
• [19] I. Uslu, H. Comert, M. Ipek, F.G. Celebi, O. Ozdemir, C. Bindal, Mater. Des. 28, 1819-1826 (2007).
• [20] M. Ortiz-Domínguez, M. Keddam, M. Elias-Espinosa, O. Damián-Mejía, M. A. Flores-Rentería, A. Arenas-Flores, J. Hernández-Ávila, Surf. Eng. 30, 490-497 (2014).
• [21] O. Ozdemir, M. A. Omar, M. Usta, S. Zeytin, C. Bindal, A.H. Ucisik, Vacuum 83, 175-179 (2008).
• [22] S. Sen, U. Sen, C. Bindal, Surf. Coat. Technol. 191, 274-85 (2005).
• [23] I. Campos, O. Bautista, G. Ramirez, M. Islas, J. De La Parra, L. Zuniga, Appl. Surf. Sci. 243, 429-436 (2005).
• [24] G. Kartal, O. L. Eryilmaz, G. Krumdick, A. Erdemir, S. Timur, Appl. Surf. Sci. 257, 6928-6934 (2011).
• [25] V. Sista, O. Kahvecioglu, O. L. Eryilmaz, A. Erdemir, S. Timur, Thin Solid Films 520, 1582-1588 (2011).
• [26] L. G. Yu, K. A. Khor, G. Sundararajan, Surf. Coat. Technol. 157, 226-230 (2002).
• [27] V. Jain, G. Sundararajan, Surf. Coat. Technol. 149, 21-26 (2002).
• [28] C. M. Brakman, A. W. J. Gommers, E. J. Mittemeijer, J. Mater. Res. 4, 1354-1370 (1989).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).