Study of Thermal Properties of Cast Metal-Ceramic Composite Foams

• Autorzy: Gawdzińska K. , Chybowski L. , Przetakiewicz W.

Identyfikatory

DOI

10.1515/afe-2017-0129

• Języki publikacji: EN

Abstrakty

EN

Owing to its properties, metallic foams can be used as insulation material. Thermal properties of cast metal-ceramic composite foams have applications in transport vehicles and can act as fire resistant and acoustic insulators of bulkheads. This paper presents basic thermal properties of cast and foamed aluminum, the values of thermal conductivity coefficient of selected gases used in foaming composites and thermal capabilities of composite foams (AlSi11/SiC). A certificate of non-combustibility test of cast aluminum-ceramic foam for marine applications was included inside the paper. The composite foam was prepared by the gas injection method, consisting in direct injection of gas into liquid metal. Foams with closed and open cells were examined. The foams were foaming with foaming gas consisting of nitrogen or air. This work is one of elements of researches connected with description of properties of composite foams. In author's other works acoustic properties of these materials will be presented.

Słowa kluczowe

EN

casting material; foundry technology; metal composite foam; ceramic composite foam; thermal properties

PL

materiał odlewniczy; technologia odlewnicza; piana metalowa; piana ceramiczna; piana kompozytowa; właściwości termiczne

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2017
• Tom: Vol. 17, iss. 4
• Strony: 47--50
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Gawdzińska K.

• Maritime University of Szczecin, Faculty of Mechanical Engineering, Wały Chrobrego 1-2, 70-500 Szczecin, Poland

autor

Chybowski L.

• Maritime University of Szczecin, Faculty of Mechanical Engineering, Wały Chrobrego 1-2, 70-500 Szczecin, Poland

autor

Przetakiewicz W.

• Maritime University of Szczecin, Faculty of Mechanical Engineering, Wały Chrobrego 1-2, 70-500 Szczecin, Poland

Bibliografia

• [1] Clyne, T.W. & Simancik, F. (Eds) (2000). Front Matter. In Metal Matrix Composites and Metallic Foams. EUROMAT 99 – Volume 5. Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA. DOI: 10.1002/3527606203.fmatter.
• [2] Körner, C. & Singer, R.F. (2000). Processing of Metal Foams – Challenges and Opportunities. In B. Jouffrey (Ed.) Microstructural Investigation and Analysis. EUROMAT 99 – Volume 4 (pp. 1-13). Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA. DOI: 10.1002/3527606165.ch1.
• [3] Wadley, H.N.G. (2001). Cellular Metals and Metal Foaming Technology. In J. Banhart, M.F. Ashby & N. Fleck (Eds), Cellular Metals and Metal Foaming Technology (pp. 381-386). Bremen: Verlag MIT.
• [4] Bhattacharya, A., Calmidi, V. & Mahajan, R.L. (2002). Thermophysical properties of high porosity metal foams. International Journal of Heat and Mass Transfer. 45(5), 1017-1031. DOI: 10.1016/S0017-9310(01)00220-4.
• [5] Gawdzińska, K., Chybowski, L. & Przetakiewicz, W. (2015). Proper matrix-reinforcement bonding in cast metal matrix composites as a factor of their good quality. Archives of Civil and Mechanical Engineering. 16(3), 553-563. DOI: 10.1016/j.acme.2015.11.004.
• [6] Gawdzińska, K. & Gucma, M. (2015). Two-Criteria Analysis of Casting Technologies of Metal and Composite Foams. Archives of Metallurgy and Materials. 60(1), 305-308.
• [7] Banhart, J. (2001). Manufacture, characterisation and application of cellular metals and metal foams. Progress in Materials Science. 46(6), 559-632. DOI: 10.1016/S0079-6425(00)00002-5.
• [8] Miyoshi, T., Itoh, M., Akiyama, S. & Kitahara, A. (2000). ALPORAS Aluminium Foam: Production Process, Properties, and Applications. Advanced Engineering Materials. 2(4), 179-183. DOI: 10.1002/(SICI)1527-2648(200004)2:4.
• [9] Grabian, J. (2012). Composite metal foam in the shipbuilding. Kraków: Fotobit. (in Polish).
• [10] Wood, J.T. (1997). Production and Applications of Continuously Cast, Foamed Aluminium. In Proceedings of Fraunhofer USA Metal Foam Symposium, J. Banhart & H. Eifert (Eds), 7–8 October 1997 (pp. 31-36). MIT, Stanton, Del, USA.
• [11] ISO 1182:2010 (2010). Reaction to fire tests for building products – Non-combustibility test.
• [12] Bogalecka, M. (2015) Fires as a Cause of Ship Accidents – A Statistical Approach. BiTP. 37(1), 171-180. (in Polish). DOI: 10.12845/bitp.37.1.2015.14.
• [13] Sobczak, J. (1998) Monolithic and composite metal foams and gazars, Kraków: Instytut Odlewnictwa (in Polish).
• [14] Mierzwa, P., Olejnik, E., & Janas, A. (2012) Modern composites to replace traditional casting materials. Archives of Foundry Engineering. 12 (spec.1), 137-142. (in Polish).
• [15] Banhart, J. (2006). Metal Foams: Production and Stability. Advanced Engineering Materials. 8(9), 781-794. DOI: 10.1002/adem.200600071.
• [16] Dulska, A., Studnicki, A., & Szajnar, J (2017). Reinforcing cast iron with composite insert. Archives of Metallurgy and Materials. 62(1), 373-375. DOI: 10.1515/amm-2017-0055.
• [17] Dulska, A., Baron, C., Szajnar, J. (2016). The analysis of the effects of heat and mass movement during alloy layer forming process on steel cast. In 25th Anniversary International Conference on Metallurgy and Materials, May 25th-27th, 2016. Conference proceedings. Ostrava: Tanger, 2016, (pp. 10-115). Brno, Czech Republic.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).