Approximate mechanical behavior analysis of a thick-wall metallic liner reinforced with composites, submitted to internal pressure

• Autorzy: Vargas-Rojas E. , Palacios-Montúfar C. , Hernández-Moreno H. , González-Velázquez J. L.

Identyfikatory

DOI

10.1515/bpasts-2016-0024

• Języki publikacji: EN

Abstrakty

EN

This study aims to simulate and to analyze the elastic and the damage behavior of a reinforced metallic liner (RML) by means of a computational tool, in order to aid in the design of high specific-stiffness and -strength barrels for heavy-duty hydraulic applications. Case studies for the program validation are undertaken using an AISI 1026 or St52.3 steel tubing reinforced with a polymeric composite of glass fiber and epoxy resin, wound in a hoop pattern. The mechanical behavior of the RML under internal pressure with no-end effects is predicted by means of strain measurements at the outermost layer. The mathematical model is based on the Classical Lamination Theory (CLT) improved with kinematic relationships that allow to introduce curvature effects. Numerical results based on experimental measurements show that the reinforcement is effective, allowing to considerably augment the maximum bearable pressure with respect to a non-reinforced metallic liner (nRML), without important weight or cost increase.

Słowa kluczowe

EN

mechanical behavior analysis; thick-wall metallic liner; composites; internal pressure

PL

analiza zachowania; ściana; kompozyty; ciśnienie wewnętrzne

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2016
• Tom: Vol. 64, nr 1
• Strony: 219--233
• Opis fizyczny: Bibliogr. 21 poz., rys., wykr., tab., fot.

Twórcy

autor

Vargas-Rojas E.

• IPN-ESIME Ticomán, Ave. Ticomán 600, Col. San José Ticomán, México D.F. 07340

autor

Palacios-Montúfar C.

• IPN-ESIME Zacatenco. Edificio Z4, 2° Piso. Ave. IPN s/n Col. Zacatenco, México, D.F. 07738

autor

Hernández-Moreno H.

• IPN-ESIME Ticomán, Ave. Ticomán 600, Col. San José Ticomán, México D.F. 07340

autor

González-Velázquez J. L.

• IPN-ESIQIE. Edificio 8, IPN s/n Col. Zacatenco, México, D.F. 07738

Bibliografia

• [1] K. Franzinger, Fluid Power 20/20, 09/01/2005, available at http://hydraulicspneumatics.com.
• [2] F. Shen, “A filament-wound structure technology overview”, Materials Chemistry and Physics 42, 96-100 (1995).
• [3] I. Daniel and O. Ishai, Engineering Mechanics of Composite Materials, pp. 85-101, 142, 189, 244-246, Oxford University Press, New York, 1994.
• [4] K. Sung and Y. Jae, “Effects of winding angles on throughthickness properties and residual strains of thick filament wound composite rings”, Composites Science and Technology 65, 27-35 (2005).
• [5] Scot Industries Catalog 902, 19 (2015).
• [6] D. Gay, Matériaux Composites, 4th edition, Éditions Hermes, Paris, 1997.
• [7] E. Vargas-Rojas, “Mechanical characterization of metallic tubing reinforced with a composite material fabricated with filament-winding process”, MSc Thesis, National Polytechnic Institute, Distrito Federal, 2007, (in Spanish).
• [8] ASTM Standard D 2734 - 91, Void Content of Reinforced Plastics.
• [9] ASTM Standard D 3800 - 79, (reapproved 1990), Density of High- Modulus Fibers.
• [10] ASTM Standard D 792 - 91, Density and Specific Gravity (Relative Density) of Plastics by Displacement.
• [11] ASTM Standard D 638 - 91, Tensile Properties of Plastics.
• [12] ASTM Standard D 695 - 91, Test Method for Compressive Properties of Rigid Plastics.
• [13] MIL-HDBK-17-3E Department of Defense Handbook, Polymer Matrix Composites, Materials Usage, Design and Analysis 3, 4-19-4-27 (1997).
• [14] J.M. Berthelot, Matériaux Composites, Comportement Mécanique et Analyse des Structures, Éditions Technique et Documentation, Paris, 1999.
• [15] R. Jones, Mechanics of Composite Materials, Taylor & Francis, London, 1999.
• [16] P.M. Schubel, J.J. Luo, and I.M. Daniel, “Through-thickness characterization of thick composite laminates”, 2006 SEM Annual Conf. Exposition on Experimental and Applied Mechanics 1, CD-ROM (2006).
• [17] L. Malvern, Introduction to the Mechanics of a Continuous Medium, Prentice-Hall, New Jersey, 1969.
• [18] F. Gasquez, “Study of fully wound reservoirs aimed for hydrogen storage under pressure: type III case study”, PhD Thesis, Université de Franche-Comté, Besanc¸on, 2008, (in French).
• [19] H. Hernández-Moreno, B. Douchin, F. Collombet, D. Choqueuse, and P. Davies, “Influence of winding pattern on the mechanical behavior of filament wound composite cylinders under external pressure”, Composites Science and Technology 68, 1015-1024 (2008).
• [20] H. Hernández-Moreno, “Fabrication monitoring of composite tubes manufactured by filament-winding and mechanical behavior under external pressure”, PhD Thesis, Université Paul Sabatier-Toulouse III, Toulouse, 2006, (in French).
• [21] W. Fl ¨ugge, Stress in Shells, 2nd edition, Springer-Verlag, Berlin, 1973.