The Effect of Dispersion Phases of SiC and Al2O3 on the Properties of Galvanic Nickel Coatings

• Autorzy: Kozik A. , Nowak M. , Gawlik M. , Bigaj M. , Karaś M.

Identyfikatory

DOI

0.1515/amm-2016-0069

• Języki publikacji: EN

Abstrakty

EN

In this study, Ni, Ni-SiC and Ni-Al₂O₃ coatings were electroplated on the 2xxx series aluminium alloy. The following parameters of the electroplating process were applied: current density - 4A/dm², time - 60 minutes, and temperature - 60°C. Hard particles of submicrometric size were used. The results of the research showing the effect of the addition of hard particles (introduced into the nickel bath as a dispersed phase) on the properties of coatings, including the effect of the type (SiC or Al₂O₃) and content (0, 25, 50 g / l) of these particles, were discussed. Based on extensive investigations, it was found that the type of ceramic particles significantly affects the structure of produced coatings. The dispersed particles incorporated into the nickel coatings improve their abrasion resistance. Improving of the corrosion properties were observed only in the case of coatings containing silicon carbide particles.

Słowa kluczowe

EN

nickel coatings; composite coatings; Ni-SiC; Ni-Al2O3; galvanic coatings

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 1
• Strony: 375--380
• Opis fizyczny: Bibliogr. 21 poz., fot., rys., tab., wykr., wzory

Twórcy

autor

Kozik A.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Nowak M.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Gawlik M.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Bigaj M.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Karaś M.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

Bibliografia

• [1] I. Dobosz, E. Rudnik, L. Burzyńska, Codeposition of SiC particles with electrolytic nickel, Archives of Metallurgy and Materials 56, 3 (2011).
• [2] I. Napłoszek-Bilnik, A. Budniok, B. Łosiewicz, L. Pająk, E. Łągiewka, Electrodeposition of composite Ni-based coatings with addition of Ti and/or Al particles, The Solid Films 474, 146-153 (2005).
• [3] A. Wyszyńska, M. Trzaska, Kinetyka osadzania warstw kompozytowych Ni-P-Si3N4, Kompozyty 3 (2006) 8-11
• [4] S. Mohajeri, A. Dolati, S. Rezagholibeiki, Electrodeposition of Ni/WC nano composite in sulfate solution, Materials Chemistry and Physics 129, 746- 750 (2011).
• [5] B. Szeptycka, Kształtowanie struktury i właściwości elektrolitycznych nanowarstw kompozytowych Ni-SiC, Ni-PTFE i Ni-SiC-PTFE, Instytut Mechaniki Precyzyjnej, Warszawa 2009.
• [6] S. T. Aruna, V. K. William Grips, K. S. Rajam, Synthesis and characterization of Ni-Al2O3 composite coatings containing different forms of alumina, Journal of Applied Electrochemistry 40, 2161-2169 (2010).
• [7] B. Szeptycka, Hybrydowe niklowe powłoki elektrochemiczne Ni-SiC-PTFE, Kompozyty (Composites) 1, 2 (2001).
• [8] G. Maurin, A. Lavant, Electrodeposition of nickel/silicon carbide composite coatings on a rotating disc electrode, Journal of Applied Electrochemistry 25, 1113-1121 (1995).
• [9] C. Tan, Y. Liu, X. Zhao, Z. Zheng, Nickel co-deposition with SiC particles at initial stage, Trans. Nonferrous Met. Soc. China, 18 (2008) 1128-1133
• [10] I. Garcia, J. Fransaer, J.-P. Celis, Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles, Surface & Coating Technology 148, 171-178 (2001).
• [11] B. Szczygieł, M. Kołodziej, Composite Ni/Al2O3 coatings and their corrosion resistance, Electrochemica Acta 50, 4188-4195 (2005).
• [12] M. Kowalewska, M. Trzaska, Nanokrystaliczne warstwy kompozytowe Ni-Al2O3 - wytwarzanie i struktura, Kompozyty 4, 99-103(2004).
• [13] M. Nowak, S. Boczkal, J. Żelechowski, A. Najder, M. Karaś, Wpływ wybranych związków organicznych na strukturę, korozję i właściwości trybologiczne kompozytowych powłok niklowych, XLII Szkoła Inżynierii Materiałowej 160-163 (2014).
• [14] M. Srivastava , V. K. William Grips, K. S. Rajam, Influence of SiC, Si3N4 and Al2O3 particles on the structure and properties of electrodeposited Ni, Materials Letters 62, 3487-3489 (2008).
• [15] S. K. Kim, H. J. Yoo, Formation of bilayer Ni-SiC composite coatings by electrodeposition, Surface & Coating Technology 108-109, 564-569 (1998).
• [16] M. Lekka, N. Kouloumbi, M. Gajo, P. L. Bonora, Corrosion and wear resistant electrodeposited composite coatings, Electrochimica Acta 50 4551-4556 (2005).
• [17] B. Szeptycka, Antykorozyjne elektrolityczne nanostrukturalne powłoki kompozytowe, Ochrona przed korozją 3,128-132 (2010).
• [18] C. Cai, X. B. Zhu, G. Q. Zheng, Y. N. Yuan, X. Q. Huang, F. H. Cao, J. F. Yang, Z. Zhang, Electrodeposition and characterization of nano-structured Ni-SiC composite films, Surface & Coatings Technology 205, 3448-3454 (2011).
• [19] M. Trzaska, G. Cieślak, The structure and properties of nanocrystalline Ni/Al2O3 layers produced by electrocrystallization, Composites Theory and Practice 14, 4 203-207 (2014).
• [20] A. Królikowski, Korozyjne właściwości kompozytowych powłok niklowych, Ochrona przed korozją 10/2010.
• [21] Th. Lampke, A. Leopold, D. Dietrich, G. Alisch, B. Wielage, Correlation between structure and corrosion behavior of nickel dispersion coatings containing ceramic particles of different sizes, Surface & Coating Technology 201, 3510-3517 (2006).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę