Determining and verifying the geometric characteristics of helical grooves in the worm in planetary toroidal drives in a more effective way

• Autorzy: Vojtková J.

Identyfikatory

DOI

10.20858/sjsutst.2017.96.18

• Języki publikacji: EN

Abstrakty

EN

In the toroidal drive, a screw-shaped groove is cut into the globoid worm. There is contact with the rolling element in this groove. This helix can be described by parametric equations. When calculating the values of the first and second curvature of the curve, as well as the radius of curvature, we must calculate the individual derivations. A new, more effective way is to determine the values already mentioned by using NX software only. When using Siemens PLM NX software, it is not necessary to determine individual derivations and their values, although the NX software determines the radii of the first and second curvature, based on the defined helix curve.

Słowa kluczowe

EN

groove; globoid worm; helix; curvature; parametric equations

PL

rowek; ślimak globoidalny; spirala; krzywizna; równania parametryczne

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2017
• Tom: z. 96
• Strony: 197--204
• Opis fizyczny: Bibliogr. 9 poz.

Twórcy

autor

Vojtková J.

• Faculty of Mechanical Engineering, The Technical University of Košice, Letná 9 Street, 42 000 Košice, Slovak Republic

Bibliografia

• 1. Gąska Damian, Tomasz Haniszewski, Jerzy Margielewicz. 2017. “I-beam girders dimensioning with numerical modelling of local stresses in wheel-supporting flanges.” Mechanika 23(3): 347-352. ISSN 1392-1207.
• 2. Wittek Adam Marek, Damian Gąska, Bogusław Łazarz, Tomasz Matyja. 2014. “Automotive stabilizer bar – stabilizer bar strength calculations using FEM, ovalization of radial areas of tubular stabilizer bars.” Mechanika 20(6): 535-542. ISSN 1392-1207.
• 3. Czech Piotr. 2012. “Diagnosis of industrial gearboxes condition by vibration and time-frequency, scale-frequency, frequency-frequency Analysis.” Metalurgija 51(4): 521-524. ISSN: 0543-5846.
• 4. Czech Piotr. 2012. “Identification of leakages in the inlet system of an internal combustion engine with the use of Wigner-Ville transform and RBF neural networks.” In: Jerzy Mikulski , ed., 12th International Conference on Transport Systems Telematics. Katowice Ustron, Poland. 10-13 October 2012. Telematics in the Transport Environment. Book Series: Communications in Computer and Information Science Vol. 329: 414-422. DOI: http://doi.org/10.1007/978-3-642-34050-5_47. ISSN: 1865-0929. ISBN: 978-3-642-34049-9.
• 5. Czech Piotr, Henryk Madej. 2011. “Application of cepstrum and spectrum histograms of vibration engine body for setting up the clearance model of the piston-cylinder assembly for RBF neural classifier.” Eksploatacja i Niezawodnosc – Maintenance and Reliability 4(52): 15-20. ISSN: 1507-2711.
• 6. Figlus Tomasz, Marcin Stańczyk. 2016. “A method for detecting damage to rolling bearings in toothed gears of processing lines.” Metalurgija 55(1): 75-78. ISSN: 0543-5846.
• 7. Figlus Tomasz, Marcin Stańczyk. 2014. “Diagnosis of the wear of gears in the gearbox using the wavelet packet transform.” Metalurgija 53(4): 673-676. ISSN: 0543-5846.
• 8. Kuehnle M.R., H. Peeken, Chr. Troeder, S. Ciernak, 1981. “The toroidal drive.” Mechanical Engineering 32(2): 32-39.
• 9. Lizhong Xu, Fu Linping. 2015. “Toroidal with half stator.” Advance in Mechanical Engineering 7(6): 1-8. Available at: http://journals.sagepub.com/doi/pdf/10.1177/1687814015589270.