Investigation on characteristics of metamaterials by using metallic rod structure for antenna engineering

• Autorzy: Santalunai Nuchanart , Santalunai Samran , Rattananamlom Adisak , Chaipanya Pichaya , Meesawad Piyaporn , Thongsopa Chanchai , Pumpoung Tajchai

Identyfikatory

DOI

10.15199/48.2022.05.19

Warianty tytułu

PL

Badanie właściwości metamateriałów przy użyciu metalicznej struktury prętów w inżynierii antenowej

• Języki publikacji: EN

Abstrakty

EN

In this research, the investigation of metallic rod type metamaterials is presented. In the study, the simulation and numerical analysis are performed to analyze the classification of metamaterials when the metallic rods are arranged in various patterns, including permittivity, permeability and reflection index. From the simulation and numerical results, it was found that metallic rod is classified in epsilon near zero characteristics when metallic rods are arranged with double and three layers. Electromagnetic properties of proposed structure are electromagnetic band gap and partially reflective surface at the designed frequency. In addition, the band gap of the proposed structure is studied. The proper layer number and pattern of metallic rods structure can control the operating frequency band. The structure can be future applied such as improving characteristic of antenna and electromagnetic interference.

PL

W pracy przedstawiono badania metamateriałów typu metalicznego pręta. W badaniu przeprowadzono symulację i analizę numeryczną w celu przeanalizowania klasyfikacji metamateriałów, gdy metalowe pręty są ułożone w różne wzory, w tym przenikalność, przepuszczalność i współczynnik odbicia. Na podstawie symulacji i wyników numerycznych stwierdzono, że pręt metalowy jest klasyfikowany w charakterystyce epsilon bliskiej zeru, gdy pręty metalowe są ułożone z podwójną i trzema warstwami. Właściwości elektromagnetyczne proponowanej konstrukcji to pasmo wzbronione elektromagnetyczne oraz częściowo odbijająca powierzchnia przy projektowanej częstotliwości. Dodatkowo badane jest pasmo wzbronione proponowanej struktury. Właściwa liczba warstw i wzór struktury metalowych prętów może sterować pasmem częstotliwości pracy. Struktura może być w przyszłości zastosowana np. do poprawy charakterystyki anteny i zakłóceń elektromagnetycznych.

Słowa kluczowe

EN

metallic rod; metamaterial; epsilon near zero; antenna engineering

PL

metamateriał; pręt; antena

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2022
• Tom: R. 98, nr 5
• Strony: 103--109
• Opis fizyczny: Bibliogr. 27 poz., rys., tab.

Twórcy

autor

Santalunai Nuchanart

• Rajamangala University of Technology Isan, Nakhon Ratchasima, Thailand

• https://orcid.org/0000-0002-5598-1534

autor

Santalunai Samran

• Suranaree University of Technology, Nakhon Ratchasima, Thailand

• https://orcid.org/0000-0001-6777-2230

autor

Rattananamlom Adisak

• Suranaree University of Technology, Nakhon Ratchasima, Thailand

• https://orcid.org/0000-0003-3605-648X

autor

Chaipanya Pichaya

• Srinakharinwirot University, Nakhon Nayok, Thailand

• https://orcid.org/0000-0002-6890-9865

autor

Meesawad Piyaporn

• Suranaree University of Technology, Nakhon Ratchasima, Thailand

• https://orcid.org/0000-0002-+5300-342X

autor

Thongsopa Chanchai

• Suranaree University of Technology, Nakhon Ratchasima, Thailand

• https://orcid.org/0000-0003-2534-4398

autor

Pumpoung Tajchai

• Rajamangala University of Technology Isan, Nakhon Ratchasima, Thailand

• https://orcid.org/0000-0002-9431-7441

Bibliografia

• [1] Lier E., Shaw R.K., Design and simulation of metamaterial-based hybrid-mode horn antennas, Electronics Letters, 44 (2008), no. 25, 1444-1445
• [2] Xiong H., Hong J.-S., Tan M.-T., Li B., Compact microstrip antenna with metamaterial for wideband applications, Turkish Journal of Electrical Engineering and Computer Sciences, 21 (2013), no. 2, 2233-2238
• [3] Ozturk Y., Yilmaz A.E., Multiband and perfect absorber with circular fishnet metamaterial and its variations, Applied Computational Electromagnetics Society Journal, 31 (2016), no. 12, 1445-1451
• [4] Liu C., Zha S., Liu P., Yang C., Zhou Q., Electrical manipulation of electromagnetically induced transparency for slow light purpose based on metal-graphene hybrid metamaterial, Applied Sciences (Switzerland), 8 (2018), no. 12, 2672
• [5] Lyu S., Qin B., Deng H., Ding X., Origami-based cellular mechanical metamaterials with tunable Poisson's ratio: Construction and analysis, International Journal of Mechanical Sciences, 212 (2021), 106791
• [6] Chen Z., Qu F., Wang Y., Nie P., Terahertz dual-band metamaterial absorber for trace indole-3-acetic acid and tricyclazole molecular detection based on spectral response analysis, Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 263 (2021), 120222
• [7] Wang H., Pan C., Zhao H., Wang T., Han Y., Design of a metamaterial film with excellent conformability and adhesion for bandage substrates, Journal of the Mechanical Behavior of Biomedical Materials, 124 (2021), 104799
• [8] Kumar A., Rajawat M.S., Mahto S.K., Sinha R., Metamaterial-Inspired Complementary Split Ring Resonator Sensor and Second-Order Approximation for Dielectric Characterization of Fluid, Journal of Electronic Materials, 50 (2021), no. 10, 5925-5932
• [9] Wang H., Zhao D., Jin Y., Wang M., Mukhopadhyay T., You Z.,Modulation of multi-directional auxeticity in hybrid origami metamaterials, Applied Materials Today, 20 (2020), 100715
• [10] Willie J.P., Dimitri N.B., David R.S., Negative refractive index metamaterials, Materials Today, 9 (2006), no. 7-8, 28-35
• [11] Engheta N., Ziolkowski R. W., In the literature, most widely used designations are "double negative" and "left-handed, Metamaterials, Physics and Engineering Explorations, (2006), Wiley & Sons. Chapter 1.
• [12] Budnarowska M., Mizeraczyk J., The numerical simulation of the interaction of a plane electromagnetic wave with a metasurface consisting of split-ring resonator, Przeglad Elektrotechniczny, 97 (2021), no. 3, 39-42
• [13] Das G.K., Basu S., Mandal B., Augustine R., Mitra M., Gain-enhancement technique for wearable patch antenna using grounded metamateria, IET Microwaves, Antennas and Propagation, 14 (2020), no. 15, 1983-1989
• [14] Roy M., Mittal A., Surface Wave Suppression in LHCP Microstrip Patch Antenna Embedded on Textured Pin Substrate, Progress In Electromagnetics Research C, 89 (2019), 171–180
• [15] Guelber E.F., Cardoso A.S.V., Capovilla C.E., Araujo H.X., A modified ultra wide band antenna with metamaterial patterns for telecommunications systems, Przeglad Elektrotechniczny, 92 (2016), no. 1, 166-169
• [16] Rudyk K., Kubacki R., Lamari S., The microstrip antenna with metamaterial property, Przeglad Elektrotechniczny, 92 (2016), no. 12, 149-152
• [17] Kamil A., Mohammad M., Babar M., Edl S., Kevin J.M., The Effects of an Electromagnetic Crystal Substrateon a Microstrip Patch Antenna, IEEE Transactions on antennas and propagation, 50 (2002), no. 4, 451-456
• [18] Zhendong D., Dan Z., Chunyu M., A Study of a Microstrip Patch Antenna With a Drilled Through-Holes Array Structure Based on the Line Source Analysis Method, Frontiers in Physics, 8 (2020), 290
• [19] Contopanagos H.F., A broadband polarized artificial magnetic conductor metasurface, Journal of Electromagnetic Waves and Applications, 30 (2020), no. 14, 1823-1841
• [20] Taixia S., Lijuan D., Yongqiang C., Yong S., Yanhong L., Fusheng D., Lixiang L., Yunlong S., Yanyan S., Using artificialmagnetic conductors to improve the efficiency of wireless power transfer, AIP Advances, 9 (2019), 045308
• [21] Das G.K., Das G.K., Basu S., Mandal B., Mitra D., Augustine R., Mitra M., Gain-enhancement technique for wearable patch antenna using grounded metamaterial, IET Microwaves, Antennas and Propagation, 14 (2020), no 15, 1983-1989
• [22] Pei R., Leach M.P., Lim E.G., Wang Z., Song C., Wang J., Zhang W., Jiang Z., Huang Y., Wearable EBG-Backed Belt Antenna for Smart On-Body Applications, IEEE Transactions on Industrial Informatics, 16 (2020), no. 11, 7177-7189
• [23] Amalraj T.D., Savarimuthu R., Design and Analysis of Microstrip Patch Antenna Using Periodic EBG Structure for C-Band Applications, Wireless Personal Communications, 109 (2019), no. 3, 2077-2094
• [24] Weily A.R., Horvath L., Esselle K.P., Sanders B.C., Bird T.S., A planar resonator antenna based on a woodpile EBG material, IEEE Transactions on Antennas and Propagation, 53 (2005), no. 1, 216-223
• [25] Markad N.T., Kanphade R.D., Wakade D.G., Design of Cavity Model Microstrip Patch Antenna, Computer Engineering and Intelligent Systems, 6 (2015), no. 4, 1-15
• [26] Richard W.Z., Design, Fabrication, and Testing of Double Negative Metamaterials, IEEE Transactions on antennas and propagation, 51 (2003), no. 7, 1516-1529
• [27] David A. A., Charman W.N., Thomas Young's contributions togeometrical optics, Clinical and Experimental Optometry, 94 (2011), no. 4, 333-340

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).