The Effect of BN or SiC Addition on PEO Properties of Coatings Formed on AZ91 Magnesium Alloy

• Autorzy: Pelczar D. , Długosz Piotr , Darłak P. , Szewczyk-Nykiel Aneta , Nykiel Marek , Hebda Marek

Identyfikatory

DOI

10.24425/amm.2022.137483

• Języki publikacji: EN

Abstrakty

EN

Currently, due to the economic and ecological aspects, light alloys are increasingly important construction material, in particular in the transport industry. One of the popular foundry magnesium alloys is the alloy AZ91, which among others due to mechanical properties and technological features, is used, for example, for light structural parts. The paper presents the results of research on modification of the AZ91 alloy surface layer in the plasma electrolytic oxidation process. The change of usable properties of the produced coatings was obtained by introducing additions of silicon carbide or boron nitride. The thickness and hardness of the protective layers produced, resistance to scratches and corrosion resistance were determined. Moreover, the friction coefficient of the coating-steel pair was investigated. The quality of the connections made between the coating and the substrate, i.e. the magnesium alloy, was also evaluated. The results obtained for coatings with silicon carbide or boron nitride additives were always compared to the results obtained for unmodified samples. On the basis of the obtained results, it was shown that the introduction of boron nitride additive to the AZ91 alloy coating produced in the plasma electrolytic oxidation process significantly improves the resistance to: (i) corrosion and (ii) abrasive wear of the coating.

Słowa kluczowe

EN

composite oxide film; abrasive wear resistance; corrosion behavior; scratch resistance; protective coatings

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 1
• Strony: 147--154
• Opis fizyczny: Bibliogr. 41 poz., fot., rys., tab.

Twórcy

autor

Pelczar D.

• Cracow University of Technology, Faculty of Materials Engineering and Physics, Department of Materials Engineering, 24 Warszawska Str., 31-155 Krakow, Poland

autor

Długosz Piotr

• Centre of Casting Technology, Research Network Lukasiewicz-Krakow Institute of Technology, Zakopiańska 73, 30-418 Krakow, Poland

• https://orcid.org/0000-0003-3305-5799

autor

Darłak P.

• Centre of Casting Technology, Research Network Lukasiewicz-Krakow Institute of Technology, Zakopiańska 73, 30-418 Krakow, Poland

• https://orcid.org/0000-0001-9183-7364

autor

Szewczyk-Nykiel Aneta

• Cracow University of Technology, Faculty of Materials Engineering and Physics, Department of Materials Engineering, 24 Warszawska Str., 31-155 Krakow, Poland

• https://orcid.org/0000-0001-7992-4887

autor

Nykiel Marek

• Cracow University of Technology, Faculty of Materials Engineering and Physics, Department of Materials Engineering, 24 Warszawska Str., 31-155 Krakow, Poland

• https://orcid.org/0000-0002-2925-5889

autor

Hebda Marek

• Cracow University of Technology, Faculty of Materials Engineering and Physics, Department of Materials Engineering, 24 Warszawska Str., 31-155 Krakow, Poland

• https://orcid.org/0000-0002-8583-9459

Bibliografia

• [1] Y. Hu, C. Zhang, W. Meng, F. Pan, J.P. Zhou J. Alloys Compd. 727, 491-500 (2017).
• [2] W. Tu, Y. Cheng, X. Wang, T. Zhan, J. Han, Y. Cheng J. Alloys Compd. 725, 199-216 (2017).
• [3] H. Bakhsheshi-Rad, E. Hamzah, M. Kasiri-Asgarani, S.N. Saud, Vacuum 131, 106-110 (2016).
• [4] M.P. Brady, D.N. Leonard, H.M. Meyer III, J.K. Thomson, K.A. Unocic Surf. Coat. Technol. 294, 164-176 (2016).
• [5] Z. Li, Y. Yuan, X. Jing, J. Alloys Compd. 706, 419-429 (2017).
• [6] J. Zhou, J. Xu, S. Huang, Z. Hu, X. Meng, X. Feng Surf. Coat. Technol. 309, 212-219 (2017).
• [7] X. Lu, C. Blawert, K.U. Kainer, M. Zheludkevich Electrochim. Acta. 196, 680-691 (2016).
• [8] F. Simchen, M. Sieber, T. Lampke Surf. Coat. Technol. 315, 205-213 (2017).
• [9] R. Liu, N. Weng, W. Xue, M. Hua, G. Liu, W. Li Surf. Coat. Technol. 269, 212-219 (2015).
• [10] M.P. Kamil, M. Kaseem, Y.H. Lee, Y.G. Ko J. Alloys Compd. 707, 167-171 (2017).
• [11] Y. Gao, A. Yerokhin, E. Parfenov, A. Matthews Electrochem. Acta 149, 218-230 (2014).
• [12] M. Kaseem, M.P. Kamil, Y.G. Ko Surf. Coat. Technol. 322, 163-173 (2017).
• [13] C.J. Wang, F.C. Chang, J.W. Lee, B.S. Lou Surf. Coat. Technol. 303, 68-77 (2015).
• [14] P.H. Sobrinho, Y. Savguira, Q. Ni, S.J. Thorpe Surf. Coat. Technol. 315, 530-545 (2017).
• [15] Y.G. Ko, E.S. Lee, D.H. Shin J. Alloys Compd. 586, 357-361 (2014).
• [16] Y. Chen, Y. Yang, W. Zhang, T. Zhang, F. Wang J. Alloys Compd. 718, 92-103 (2017).
• [17] C. Liu, J. Liang, J. Zhou, Q. Li, Z. Peng, L. Wang Surf. Coat. Technol. 304, 179-187 (2016).
• [18] F. Wei, W. Zhang, T. Zhang, F. Wang J. Alloys Compd. 690, 195-205 (2017).
• [19] L. Shuo-Jen, D.T.H. Le Surf. Coat. Technol. 307, 781-789 (2016).
• [20] M. Sabouri, S.M. Mousavi Khoei Surf. Coat. Technol. 334, 543-555 (2018).
• [21] W. Yang, W. Liu, Z. Peng, B. Liu, J. Liang Ceram. Int. 43, 16851-16858 (2017).
• [22] D.V. Mashtalyar, S.V. Gnedenkov, S.L. Sinebryukhov, I.M. Imshinetskiy, A.V. Puz J. Mater. Sci. Technol. 33, 461-468 (2017).
• [23] L. Bih-Show, L. Yi-Yuan, T. Chuan-Ming, L. Yu-Chu, D. Jenq-Gong, L. Jyh-Wei Surf. Coat. Technol. 332, 358-367 (2017).
• [24] A. Szewczyk-Nykiel, P. Długosz, P. Darłak, M. Hebda J. Mater. Eng. Perform. 26, 2555-2562 (2017).
• [25] R. Arrabal, E. Matykina, T. Hashimoto, P. Skeldon Surf. Coat. Technol. 203, 2207-2220 (2009).
• [26] Y. Song, K. Dong, D. Shan, E.H. Han J. Magnesium Alloy. 1, 82-87 (2013).
• [27] S. Yagi, K. Kuwabara, Y. Fukuta, K. Kubota, E. Matsubara Corros. Sci. 73, 188-195 (2013).
• [28] R.O. Hussein, D.O. Northwood, X. Nie Surf. Coat. Technol. 237, 357-368 (2013).
• [29] K.M. Lee, K.R. Shin, S. Namgung, B. Yoo, D.H. Shin Surf. Coatings Technol. 205, 3779-3784 (2011).
• [30] M. Mohedano, C. Blawert, M.L. Zheludkevich, Elsevier Mater Design, 86, 735-744 (2015).
• [31] A. Fattah-alhosseini, R. Chaharmahali, K. Babaei Journal of Magnesium and Alloys (2020). DOI: https://doi.org/10.1016/j.jma.2020.05.001.
• [32] Y. Lu, C. Jinhui, C. Yingliang Surf. Coat. Tech. 276, 266-278 (2015).
• [33] S. Wan, N. Si, Y. Xia Trans. Nonferrous Met. Soc. China 25, 1926-1934 (2015).
• [34] X. Lu, C. Blawert, K. U. Kainer, T. Zhang, F. Wang, M. L. Zheludkevich Surf. Coat. Tech. 352, 1-14 (2018).
• [35] C. Blawert, V. Heitmann, W. Dietzel, H.M. Nykyforchyn, M.D. Klapkiv Surf. Coatings Technol. 201, 8709-8714 (2007).
• [36] L. Yu, J. Cao, Y. Cheng Surf. Coat. Tech. 276, 266-278 (2015).
• [37] J.J. Zhuang, Y.Q. Guo, N. Xiang, Y. Xiong, Q. Hu, R.G. Song Appl. Surf. Sci. 357, 1463-1471 (2015).
• [38] W. Li, M. Tang, L. Zhu, H. Liu, Appl. Surf. Sci. 258, 10017-10021 (2012).
• [39] B. Mingoa, R. Arrabal, M. Mohedano, A. Pardo, E. Matykina Surf. Coat. Tech. 309, 1023-1032 (2017).
• [40] C. Ziejewska, J. Marczyk, A. Szewczyk-Nykiel, M. Nykiel, M. Hebda Adv. Powder Technol. 30, 835-842 (2019).
• [41] J. Zhao, X. Xie, C. Zhang Corros. Sci. 114, 146-155 (2017).

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).