Corrosion Characteristics of Composites of (Mo, Ti)C Ti and TiC/Ti Type Manufactured with SLM technique

• Autorzy: Figiel P. , Biedunkiewicz A. , Biedunkiewicz W. , Grzesiak D. , Pawlyta M.

Identyfikatory

DOI

10.24425/amm.2019.130135

• Języki publikacji: EN

Abstrakty

EN

The addition of hard ceramic particles of nc-(Ti, Mo)C in carbon network into Ti matrix has been proved to be an efficient way to enhance their properties. The purpose of this work was to analyze the corrosion, tribological, mechanical and morphological effects of combining nc-(Ti, Mo)C/C with titanium metal, to create a unique composite via selective laser melting technique (SLM). Composites with different weight percentage (5, 10 and 20 wt%) of ceramic phase were produced. The samples of pure Ti and Ti-6Al-4V alloy were also tested, as a reference. These composites were examined for corrosion resistance in body fluid (artificial saliva solution). Moreover, the properties of titanium composites reinforced with nc-TiC powders were compared. It was stated that mechanical properties were significantly improved with increasing amount of nc-(Ti, Mo)C/C in Ti matrix. In terms of corrosion resistance, the composites showed worse properties compared to pure titanium and Ti-6Al-4V alloy, but better than TiC-reinforced composites.

Słowa kluczowe

EN

nanocomposites; TiMCs; SLM; (Ti, Mo)C

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 4
• Strony: 1617--1625
• Opis fizyczny: Bibliogr. 24 poz., fot., rys., tab.

Twórcy

autor

Figiel P.

• West Pomeranian University of Technology, Faculty of Mechanical Engineering and Mechatronics, 19 Piastow Av., 70-310 Szczecin, Poland

autor

Biedunkiewicz A.

• West Pomeranian University of Technology, Faculty of Mechanical Engineering and Mechatronics, 19 Piastow Av., 70-310 Szczecin, Poland

autor

Biedunkiewicz W.

• West Pomeranian University of Technology, Faculty of Mechanical Engineering and Mechatronics, Institute of Manufacturing Engineering, 19 Piastow Av., 70-310 Szczecin, Poland

autor

Grzesiak D.

• West Pomeranian University of Technology, Faculty of Mechanical Engineering and Mechatronics, Institute of Manufacturing Engineering, 19 Piastow Av., 70-310 Szczecin, Poland

autor

Pawlyta M.

• Silesian University of Technology, Faculty of Mechanical Engineering, Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] P. I. Brånemark, B. O. Hansson, R. Adell, U. Breine, J. Lindstrom, O. Hallen, A. Ohman, Scand. J. Plast. Reconstr. Surg. Suppl. 16, 1-132 (1977).
• [2] K. J. Anusavice, Phillips’ Science of Dental Materials 11th Edition, Saunders; St. Louis, (2003).
• [3] R. C. Petersen, Metals; 4 (4), 549-569 (2014).
• [4] Y. S. Tian, C. Z. Chen, L. B. Chen, J. H. Liu, T. Q. Lei, J. Mater. Sci. 40, 4387-4390 (2005).
• [5] M. Long, H. J. Rack, Wear 249, 157-167 (2001).
• [6] S. Fouvry, C. Paulin, S. Deyber, Tribol. Int. 42, 461-474 (2009).
• [7] C. Poletti, M. Balog, T. Schubert, V. Liedtke, C. Edtmaier, Compos. Sci. Technol. 68 (9), 2171-2177 (2008).
• [8] D. E. Alman, J. A. Hawk, Wear 225-229, 629-639 (1999).
• [9] H. O. Gülsoy, V. Gunay, T. Baykara, Powder Metall. 58 (1), 30-35 (2015).
• [10] A.A.M. da Silva, A. Meyer, J. F. dos Santos, C.E.F. Kwietniewski, T. R. Strohaecker, Compos. Sci. Technol. 64, 1495-1501 (2004).
• [11] N. Takahashi, T. Sato, S. Nakatsuka, K. Fujiwara, K. Yokozekii, Titanium metal matrix composite development for commercial aircraft landing gear structure, Proceedings of 28th International Congress of The Aeronautical Sciences 2012, Brisbane, Australia, (2012).
• [12] S. Cruz, P. Rey, M. Cabeza, M. Lieblich, P. Merino, Effect of the TiC particle size on the extrusion of 7075 aluminium matrix composite, ECCM16 - proceedings of the 16th European Conference on Composite Materials, Seville, Spain, (2014).
• [13] D. Gu, Y-C. Hagedorn, W. Meiners, K. Wissenbach, R. Poprawe, Compos. Sci. Technol. 71, 1612-1620 (2011).
• [14] P. D. Zhou, F. Qiu, H. Wang, Q. Jiang, Acta Metall. Sin. (Engl. Lett.) 27 (5), 798-805 (2014).
• [15] Z. Wang, H. Zhang, C. Guo, W. Liu, Z. Yang, X. Sun, Z. Zhang, F. Jiang, J. Mater. Sci. 51 (10), 4996-5007 (2016).
• [16] Z. H. Wang, D. Li, D. Y. Geng, S. Ma, W. Liu, Z. D. Zhang, Phys. Stat. Sol. (A) 205 (12), 2919-2923 (2008).
• [17] C. I. Sathish, Y. Guo, X. Wang, Y. Tsujimoto, J. Li, S. Zhang, Y. Matsushita, Y. Shi, H. Tian, H. Yang, J. Li, K. Yamaura, J. Solid State Chem. 196, 579-585 (2012)
• [18] V. V. Krainika, A. Lisenkov, V. I. Ivashchenko, V. L. Bekenev, Phys. Stat. Sol. (B) 194, 575-583 (1996)
• [19] J. H. Jang, C-H. Lee, Y-U. Heo, D-W. Suh, Acta Mater. 60, 208-2017 (2012),
• [20] Y. Funakawa, T. Shiozaki, K. Tomita, T. Yamamoto, E. Maeda, ISIJ Int. 44, 1945-1951 (2004).
• [21] O. Kontsevoi, A. J. Freeman, G. B. Olson, Adhesive strength of interfaces between bcc and fcc Fe and transition metal carbides: effect of misfit dislocations on structure and bonding, Proceedings of 30th Annual SRC Meeting, Evanston, USA, (2014).
• [22] A. Biedunkiewicz, J. Sol-Gel Sci. Technol. 59, 448-455 (2011).
• [23] Y. K. Kim, J-H. Shim, Y. W. Cho, H-S. Yang, J-K. Park, Int. J. Refract. Met. Hard Mater. 22, 193-196 (2004).
• [24] J-H. Shim, C-S. Oh, D. N. Lee, Metall. Mater. Trans. B, 27, 955-966 (1996).