Properties of TiC-Mo₂C-WC-Ni Cermets by a High-Energy Ball Milling/Spark Plasma Sintering

• Autorzy: Lee Jeong-Han , Park Jae-Cheol , Park Hyun-Kuk

Identyfikatory

DOI

10.24425/amm.2023.141485

• Języki publikacji: EN

Abstrakty

EN

A TiC-Mo₂C-WC-Ni alloy cermet was fabricated by high-energy ball milling (HEBM) and consolidation through spark plasma sintering. The TiC-based powders were synthesized with different milling times (6, 12, 24, and 48 h) and subsequently consolidated by rapid sintering at 1300°C and a load of 60 MPa. An increase in the HEBM time led to improved sinterability as there was a sufficient driving force between the particles during densification. Core-rim structures such as (Ti, W)C and (Ti, Mo)C (rim) were formed by Ostwald ripening while inhibiting the coarsening of the TiC (core) grains. The TiC grains became refined (2.57 to 0.47 µm), with evenly distributed rims. This led to improved fracture toughness (11.1 to 14.8 MPa·m^1/2) owing to crack deflection, and the crack propagation resistance was enhanced by mitigating intergranular fractures around the TiC core.

Słowa kluczowe

EN

TiC-based cermet; core-rim structure; high-energy ball-milling; spark plasma sintering; microstructure

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 1
• Strony: 127--130
• Opis fizyczny: Bibliogr. 7 poz., fot., rys., tab., wzory

Twórcy

autor

Lee Jeong-Han

• Automotive Materials & Component R&D Group, Korea Institute of Industrial Technology, 6, Cheomdan-gwagiro 208-Gil, Buk-gu, Gwangju, 61012, Korea

• https://orcid.org/0000-0002-8347-277X

autor

Park Jae-Cheol

• Automotive Materials & Component R&D Group, Korea Institute of Industrial Technology, 6, Cheomdan-gwagiro 208-Gil, Buk-gu, Gwangju, 61012, Korea

• https://orcid.org/0000-0003-3615-3933

autor

Park Hyun-Kuk

• Automotive Materials & Component R&D Group, Korea Institute of Industrial Technology, 6, Cheomdan-gwagiro 208-Gil, Buk-gu, Gwangju, 61012, Korea

• https://orcid.org/0000-0002-6207-6217

Bibliografia

• [1] J.H. Lee, I.H. Oh, H.K. Park, Arch. Metall. Mater. 66 (4), 1029-1032 (2021).
• [2] Z. Fu, R. Koc, Mater. Sci. Eng. A 676, 278-288 (2016).
• [3] H.O. Andren, Mater. Chem. Phys. 67, 209-213 (2001).
• [4] G.R. Antis, P. Chantikul, B.R. Lawn, D.B. Marshall, J. Am. Ceram. Soc. 64 (9), 533-538 (1981).
• [5] A. Ozer, O.B. Kilic, Acta Phys. Pol. A 131 (3), 329-331 (2017).
• [6] P. Li, J. Ye, Y. Liu, D. Yang, H. Yu, Int. J. Refract. Met. Hard Mater. 35, 27-31 (2012).
• [7] Y. Yanaba, T. Takahashi, K. Hayashi, J. Jpn. Soc. Powder Powder Metallurgy 51 (5), 374-384 (2004).

Uwagi

1. This study has been conducted with support of the Korea Institute of Industrial Technology, Production Industry Leading Core Technology Development Project as the “Development of an on-site facility attached cryogenic machining integrated system (KITECH-EH-22-0093)”.

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).