Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
This paper begins with a brief introduction to the operating principles of a split-cycle engine that utilizes a valved, intermediary volume to connect the two engine cylinders. Results from experimental testing of the engine fueled with pure methane are presented with a particular emphasis on the combustion duration and phasing. Two different methods of analysing the combustion duration – the mass fraction burn (MFB) and normalized pressure ratio (PRN) – are given. Testing was performed at wide open throttle (WOT) for engine speeds ranging from 850–1200 rpm, and air-fuel equivalence ratios from 0.8–1.0. The results indicate that the main combustion duration is very rapid for all conditions tested, despite late combustion phasing. Changes in spark timing were shown to have a considerable impact on IMEP but did not greatly effect the burn duration. Cyclic variability of IMEP was found to be less than 4% for all cases, except when operation was leaner than ø = 0.85, indicating good combustion stability.
Czasopismo
Rocznik
Tom
Strony
33--41
Opis fizyczny
Bibliogr. 27 poz., wykr.
Twórcy
autor
- University of Windsor, Ontario, Canada
autor
- Department of Mechanical, Automotive and Materials Engineering, University of Windsor, Canada
Bibliografia
- [1] Evans R.L., Blaszczyk J. A comparative study of the performance and exhaust emissions of a spark ignition engine fuelled by natural gas and gasoline. Proc. Inst. Mech. Eng. Part D, J. Automob. Eng., vol. 211, no. 1, pp. 39–47, Jan. 1997.
- [2] Cho H.M., He B.-Q. Spark ignition natural gas engines – a review. Energy Convers. Manag., vol. 48(2), pp. 608–618, Feb. 2007.
- [3] Semin R.A.B. A technical review of compressed natural gas as an alternative fuel for internal combustion engines. Am. J. Eng. Appl. Sci., vol. 1, no. 4, pp. 302–311, 2008.
- [4] Korakianitis T., Namasivayam A.M., Crookes R.J. Natural-gas fueled spark-ignition (SI) and compression-ignition (CI) engine performance and emissions. Prog. Energy Combust. Sci., vol. 37(1), pp. 89–112, Feb. 2011.
- [5] Johansson B., Olsson K. Combustion chambers for natural gas SI engines part I: fluid flow and combustion. SAE Tech. Pap. 950469, 1995.
- [6] Hui X., Lapointe L.A. Combustion characteristics of lean burn and stoichiometric with EGR ignited natural gas engines. Proc. ASME 2014 Intern. Combust. Engine Div. Fall Tech. Conf., vol. ICEF2014, no. 5521, 2014.
- [7] Das A., Watson H.C. Development of a natural gas spark ignition engine for optimum performance. Proc. Inst. Mech. Eng. Part D J. Automob. Eng., vol. 211, no. 5, pp. 361–378, Jan. 1997.
- [8] Tunestål P., Christensen M., Einewall P., Andersson T., Johansson B., Jonsson O. Hydrogen addition for improved lean burn capability of slow and fast burning natural gas combustion chambers. SAE Tech. Pap. 2002-01-2686, 2002.
- [9] Kastanis E., Evans R.L. The squish-jet combustion chamber for ultra-lean burn natural gas engines. SAE Tech. Pap. 2011-24-0112, 2011.
- [10] Olsson K., Johansson B. Combustion chambers for natural gas SI engines part 2: combustion and emissions. SAE Tech. Pap. 950517, 1995.
- [11] Ancimer R. The influence of in-cylinder flows on the flame kernel growth in natural gas fuelled spark ignition engines. University of Toronto, 2000.
- [12] Musu E., Rossi R., Gentili R. Clean diesel combustion by means of the HCPC concept. SAE Tech. Pap. 2010-01-1256, 2010.
- [13] Thurston K., Lundy J. Split-cycle engine and method of operation. US Patent 3,880,126, 1975.
- [14] Phillips F., Gilbert I., Pirault J.P., Megel M. Scuderi split cycle research engine: overview, architecture and operation. SAE Tech. Pap., no. 2011-01-0403, 2011.
- [15] Webb S.J., Webb R.D. Gas engine. US Patent 1,062,999, 1913.
- [16] De Vries G. Internal combustion engine. US Patent 3,623,463, 1971.
- [17] Tour B. Double piston cycle engine, US Patent 7,516,723, 2009.
- [18] Scuderi S., Scuderi S. Split-cycle air hybrid engine. Patent, WO 2007/0814452007.
- [19] Meldolesi R., Bailey G., Lacy C., Gilbert I., Pirault J.P., Perkins A. Scuderi split cycle fast acting valvetrain: architecture and development. SAE Tech. Pap., no. 2011-01-0404, 2011.
- [20] Branyon D., Simpson D. Miller cycle application to the Scuderi split cycle engine (by downsizing the compressor cylinder). SAE Tech. Pap. 2012-01-04, 2012.
- [21] Douailler B., Ravet F., Delpech V., D. Soleri, Reveille B., Kumar R. Direct injection of CNG on high compression ratio spark ignition engine: numerical and experimental investigation,” SAE Tech. Pap. 2011-01-0923, 2011.
- [22] Ball J.K., Raine R.R., Stone C.R. Combustion analysis and cycle-by-cycle variations in spark ignition engine combustion part 1: an evaluation of combustion analysis routines by reference to model data. Proc. Inst. Mech. Eng. Part D, vol. 212, no. D5, pp. 381–399, 1998.
- [23] Eriksson L. Spark advance modeling and control. No. 580. p. 183, 1999.
- [24] Hires S.D., Tabaczynski R.J., Novak J.M. The prediction of ignition delay and combustion intervals for a homogeneous charge, spark ignition engine. SAE Tech. Pap., pp. 1053–1067, 1979.
- [25] Heywood J.B. Internal Combustion Engine Fundamentals. New York: McGraw-Hill, 1988.
- [26] Ma F., Wang Y., Liu H., Li Y., Wang J., Zhao S. Experimental study on thermal efficiency and emission characteristics of a lean burn hydrogen enriched natural gas engine. Int. J. Hydrogen Energy, vol. 32, no. 18, pp. 5067–5075, Dec. 2007.
- [27] Saanum I., Bysveen M., Tunestål P., Johansson B. Lean burn versus stoichiometric operation with EGR and 3-way catalyst of an engine fueled with natural gas and hydrogen enriched natural gas. SAE Tech. Pap., 2007.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-7168bf85-3eb7-44b8-a3a9-3308e2c9dae0