Construction and operation of 3D printers

• Autorzy: Filipiak M. , Jajczyk J.
• Języki publikacji: EN

Abstrakty

EN

The article presents the construction and the rules of operation of 3D printers. The most energy-consuming elements of the printer were presented and their parameters were determined. Key input data essential to configure the software of the controller ensuring correct operation of the equipment were presented. Various types of software used for editing and update of firmware in the printer’s controller were presented. Procedures used for 3D objects and their conversion into instructions comprehensible for the printer’s controller were presented along with the calibration process of the equipment in order to ensure high printing quality.

Słowa kluczowe

EN

3D print; calibration of 3D printers; energy consumption

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Computer Applications in Electrical Engineering
• Rocznik: 2015
• Tom: Vol. 13
• Strony: 188--196
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Filipiak M.

• Poznań University of Technology 60-965 Poznań, ul. Piotrowo 3a

autor

Jajczyk J.

• Poznań University of Technology 60-965 Poznań, ul. Piotrowo 3a

Bibliografia

• [1] Zein N., Hanouneh I., Bishop P., Samaan M., Eghtesad B., Quintini C., Miller C., Yerian L., Klatte R., Three-Dimensional Print of a Liver for Preoperative Planning in Living Donor Liver Transplantation, American Association for the Study of Liver Diseases, 2013.
• [2] Jewell C., 3D PRINTING and the future of stuff, WIPO magazine, April 2013, pages 2-6.
• [3] Canessa E., Fonda C., Zennaro M., Low-Cost 3D Printing, ICTP—The Abdus Salam International Centre for Theoretical Physics, 2013.
• [4] The Magic of 3D Printing at Yale, The Publication of Yale’s School of Engineering & Applied Science, Yale Engineering 2014-2015, pages 24-31.
• [5] http://reprap.org (2015.01.05)
• [6] technical documentation of controller a4988
• [7] http://arduino.cc/ (2014.09.20)
• [8] http://www.designfutures.pl (2015.01.06)
• [9] https://github.com/ (2014.09.30)
• [10] http://hydraraptor.blogspot.com/2011/12/mendel90.html
• [11] http://singularityhub.com/2013/03/28/patient-receives-3d-printed-implant-to-replace-75-percent-of-skull/
• [12] Fabiański B., Sterownik drukarki trójwymiarowej z obsługą nowych technologii [3D printer controller supporting new technologies], Poznań University of Technology Academic Journals, Poznań 2014, No. 80 pp.253-260.
• [13] http://www.przyrostowo.pl/technologie
• [14] http://centrumdruku3d.pl
• [15] Weinberg M., IT WILL BE AWESOME IF THEY DON’T SCREW IT UP: 3D Printing, Intellectual Property, and the Fight Over the Next Great Disruptive Technology, November 2010, Public Knowledge.