An attempt to use postconsumer MDF as a raw material for the manufacture of particleboards

• Autorzy: Borysiuk P. , Byczek M. , Jenczyk-Tołłoczko I. , Boruszewski P. , Monder S.
• Języki publikacji: EN

Abstrakty

EN

An attempt to use postconsumer MDF as a raw material for the manufacture of particleboards. The aim of the study was to determine the influence of addition of mechanically grinded postconsumer MDF to the inner layer of particleboards on its properties. Three-layer particleboards with a predetermined density of 650 kg/m3 and a thickness of 16 mm and a weight fraction of MDF particles of 10, 20, 30 and 50 % to the inner layer were prepared. Manufactured boards were tested for the density and density distribution, MOR, MOE, IB, swelling and water absorption after 2 and 24 hours soaking in water. It was observed, that the addition of grinded postconsumer MDF to the inner layer of particleboards (in amount of 10 – 50 %) generally does not have negative effect on their mechanical properties and has a positive influence on the reduction of swelling and water absorption, especially when exposed to water for 24 h.

Słowa kluczowe

EN

postconsumer MDF; particleboards; properties of boards

PL

płyty wiórowe; MDF; właściwości desek

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2014
• Tom: No. 87
• Strony: 7--11
• Opis fizyczny: Bibliogr. 14 poz.

Twórcy

autor

Borysiuk P.

• Szkoła Główna Gospodarstwa Wiejskiego w Warszawie; Wydział Technologii Drewna

autor

Byczek M.

• Szkoła Główna Gospodarstwa Wiejskiego w Warszawie; Wydział Technologii Drewna

autor

Jenczyk-Tołłoczko I.

• Szkoła Główna Gospodarstwa Wiejskiego w Warszawie; Wydział Technologii Drewna

autor

Boruszewski P.

• Szkoła Główna Gospodarstwa Wiejskiego w Warszawie; Wydział Technologii Drewna

autor

Monder S.

• Szkoła Główna Gospodarstwa Wiejskiego w Warszawie; Wydział Technologii Drewna

Bibliografia

• 1. BORYSIUK P., KUROWSKA A., CZECHOWSKA J., BORUSZEWSKI P., MAMIŃSKI M., KUPNIEWSKI C., 2010: Waste particles from particleboards machining process as raw material for particleboards manufacturing. Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology, 70/2010, 31-35.
• 2. EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength.
• 3. EN 312: 2005 Particleboards – Specifications.
• 4. EN 317:1999 Particleboards and fibreboards - Determination of swelling in thickness after immersion in water.
• 5. EN 319:1999 Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board11.
• 6. EN 323: 1999: Wood-based panels – Determination of density.
• 7. GAMAGEA N., SETUNGEA S., JOLLANDSA M., HAGUEB J. 2009: Properties of hardwood saw mill residue-based particleboards as affected by processing parameters. Industrial crops and products 29 (2009): 248–254.
• 8. MANTANIS G., ATHANASSIADOU E., COUTINHO J.M.A., NAKOS P., 2004: A new recycling process for waste panels. V: Management of recovered wood recycling, bioenergy and other options. Gallis C.(Ur.), Thessaloniki, 204-210.
• 9. NICEWICZ D, DANECKI L., 2009: Wood from pallets and wooden containers as a potential source of raw material for wood-based boards industry, Annals of Warsaw University of Life Science – SGGW, Forestry and Wood Technology, 69, 115–118.
• 10. NIRDOSHA G., SETUNGE S. 2006: Formulation and process modeling of particleboard production using hardwood saw mill wastes using experimental design. Composite Structures, 75, 520–523.
• 11. RATAJCZAK E., SZOSTAK A., MIEDZIŃSKA G., 2003: Drewno poużytkowe w Polsce, Wydawnictwo Instytutu Technologii Drewna, Poznań.
• 12. RIVELA B., MOREIRA M.T., FEIJOO G., 2007: Life cycle inventory of medium density fibreboard. The International Journal of Life Cycle Assessment, 12 (3), 143 – 150.
• 13. SETUNGE S., WONG K. K., JOLLANDS M., 2009: Economic and Environmental Benefits of Using Hardwood Sawmill Waste as a Raw Material for Particleboard Production. Water Air Soil Pollut: Focus (2009) 9: 485–494.
• 14. ROFFAEL E., DIX B., BEHN C., BÄR G., 2010: Use of UF-bonded recycling particle- and fibreboards in MDF-production. European Journal of Wood and Wood Products, 68 (2), 121 – 128.