Reduction of an Adverse Impact During Well Drilling by Means of Drilling Waste Usage

• Autorzy: Kuznetsov V. S. , Suprun I. K.

Identyfikatory

DOI

10.12911/22998993/68211

• Języki publikacji: EN

Abstrakty

EN

The problem of drilling waste utilisation is assumed to be resolved through the implementation of the complex of environment protection measures in production engineering. They include primarily the use in the process of well drilling of drilling mud on the basis of water-soluble biodegradable polymers and a four-stage drilling mud refining system. Secondly, the usage of the well site construction with trenching for allocation of expressed bore mud and a temporary ground tank for drilling waste water.

Słowa kluczowe

EN

bore mud; utilisation; toxicity; well site; sludge pit; dehumidification; oil production; refining; expression; waste treatment

• Wydawca: Polskie Towarzystwo Inżynierii Ekologicznej ; Lublin University of Technology
• Czasopismo: Journal of Ecological Engineering
• Rocznik: 2017
• Tom: Vol. 18, nr 2
• Strony: 12--15
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Kuznetsov V. S.

• Saint-Petersburg Mining University, 21st Vasilevsky Ostrov, Line 2, Saint Petersburg, 199106, Russia

autor

Suprun I. K.

• Saint-Petersburg Mining University, 21st Vasilevsky Ostrov, Line 2, Saint Petersburg, 199106, Russia

Bibliografia

• 1. Bezrodnyi Y.G. 2000. Land protection in the concept of low-waste technology of well construction. Environmental Protection in the Oil and Gas Industry, 2, 15–20.
• 2. Bochkarev G.P., Sharipov A.U., Brahfogel E.A. 1982. Ways of disposal of waste drilling fluids. Oil Industry, 4, 64.
• 3. Bulatov A.I., Levshin V.A., Chemetov V.U. 1989. Methods and equipment cleaning and waste drilling. Overview Inf. Ser. Corrosion Control and Environmental Protection. VNIIOENG, pp. 56.
• 4. Chemetov V.Y. 1989. Cleaning drilling wastewater electrocoagulation. Overview Inf. VNIIOENG. Ser. Corrosion control and environmental protection, pp. 35.
• 5. Chemetov V.Y., Riabchenko V.I., Yezhov M.Yu. 1988. The use of waste drilling muds for land reclamation. EI Corrosion control and protection of the environment: Patriotican experience, 5, 12–14.
• 6. Kuzmin Y., Voitenko V.S., Bratishko Y. 1984. Effect of drilling fluids and their ingredients on the environment in the Far North. Oil Industry, 2, 43–49.
• 7. Malishkin M.M. 2009. Improved methods of reclamation of sludge pits. Notes of the Mining Institute. “Problems of subsoil” St. Petersburg RIC Mining Institute (Technical University), 181, 220–222.
• 8. Skomorovsky N.I., Suffering L.M., Bosov M.E. 1980. Rationing of water use in the oil industry is one of the ways to save water resources and environmental protection. Oil Industry, 2, 43–45.
• 9. Skomorovsky N.I., Suffering L.M. 1991. Status and trends of water resources management in the oil industry. Corrosion and Protection in the Oil and Gas Industry, 10, 22–24.
• 10. Shemetov V.Yu. 1989. The elimination of sludge pits at, well construction. Overview Inf. VNIIOENG. Ser. Corrosion Control and Environmental Protection, pp. 33.
• 11. Shishov V.A., Petrosyan M.V. 1985. Reduction of polluting properties of waste drilling fluids. Oil Industry, 2, 49–52.
• 12. Shitov V.A., Chemetov V.Y. 1985. Features clean reusable drilling wastewater. Oil Industry, 8, 64–66.
• 13. Yagafarov R.G. 1981. Influence of repeated regeneration of the active components on the properties of drilling fluids. Problems of Oil and Gas Production Tyumen, 52, 41.
• 14. Yakovlev V.V. 2006. Environmental safety, risk assessment. St. Petersburg Publishing NP “Strategy of the Future”, pp. 476.
• 15. Yezhov M.Y., Terpelets V.I., Chemetov V.Y. 1987. Effect of waste drilling muds to soil pollution. VNIITEIagroprom, No. 175-BC-86.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).