Research on the process of superfinishing ceramic surfaces of cutting plates

• Autorzy: Musiał W. , Choromańska M.
• Języki publikacji: EN

Abstrakty

EN

This paper presents initial research on the surfaces of cutting ceramic plates ground using diamond grinding wheels. Ceramic materials were ground using a piezoelectric feed-in system whose aim was to minimize the effect of brittle cracking of the ceramic material in the machining zone. Due to precise machining it is possible to smooth out the machined surface by ductile-regime grinding the material removal mechanism and, in consequence, reducing the defects on its surface and in the surface layer of the ground material.

Słowa kluczowe

EN

ceramic cutting plates; superfinishing surface layer; defects

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2012
• Tom: Vol. 12, No. 4
• Strony: 63--70
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Musiał W.

• Koszalin University of Technology, Mechanical Department, Raclawicka 15–17, 75–620 Koszalin, Poland

autor

Choromańska M.

• Koszalin University of Technology, Mechanical Department, Raclawicka 15–17, 75–620 Koszalin, Poland

Bibliografia

• [1] CHOROMANSKA M., 2010, Investigation of grinding process of surface cutting of ceramic cutting inserts, Master’s thesis, (in Polish).
• [2] BIFANO T. G., 1988, Ductile-Regime Grinding of Brittle Materials, PhD Thesis, NC State University, Raleigh, North Carolina.
• [3] BIFANO T. G., DOW T. A., SCATTERGOOD R. O., 1991, Ductile-Regime grinding: a new technology for machining brittle materials, Trans. ASME, J. Eng. Ind., 113/2, 184-189.
• [4] BLAKE P., BIFANO T. G., DOW T. A., SCATTERGOOD R. O., 1988, Precision machining of ceramic materials. Am. Ceram. Soc. Bull., 67/6, 1038-1044.
• [5] JURCZYK M., JAKUBOWICZ J., 2004, Ceramic nanomaterial’s, Publishing House of Poznan University of Technology, (in Polish).
• [6] MUSIAL W., CHOROMANSKA M., FALKOWSKI S, 2012, The proposal of microgrinding realization of ceramic inserts in condition plastic flow of work material, Mechanik, 2, 144-145, (in Polish).
• [7] MUSIAL W., 2007, Investigation of microgrinding process in condition the ductile material removal, PhD thesis,Koszalin University of Technology, (in Polish).
• [8] OCZOS K. E., 1996, Shaping of technical ceramic materials, Publishing House of Rzeszow University of Technology, Rzeszow, (in Polish).
• [9] OCZOS K. E., LIUBIMOV V., 2003, Geometrical structure of surface. The basis of classification with atlas of shaped characteristic surfaces, Publishing House of Rzeszow University of Technology, Rzeszow, (in Polish).
• [10] PAMPUCH R., 1995, Structure and properties of ceramic materials, Publishing House of AGH University of Science and Technology, (in Polish).