Vibrodiagnostics of rolling ball bearings connected with processing, result´s comparison and prediction of service life

• Autorzy: Šulka Peter , Sapietová Alžbeta , Bárnik František

Identyfikatory

DOI

10.20858/sjsutst.2020.106.16

• Języki publikacji: EN

Abstrakty

EN

This article deals with vibration analysis and the processing of the vibration signal obtained during the experimental measurement on a rotary shaft at start-up, constant speed and run-out, with rolling ball bearings. The next step of the research is the introduction and application of mathematical and numerical methods for the processing of input and measured data using diagnostic and mathematical software. The principle of measurement and processing was to compare the results of oscillation of an undamaged bearing with several types of damaged bearings with corresponding deformations in the orbits/raceways. The purpose of this research and comparison was to achieve optimal results (in terms of amplitude values, the occurrence of eigenvalue vibrations and the resonance phenomenon) of individual bearings with corresponding deformations in the raceways and to obtain calibration diagrams as a tool for possible prediction of bearings in operation.

Słowa kluczowe

EN

rolling ball bearing; vibrodiagnostics; evaluation; comparison

PL

toczne łożysko kulkowe; wibrodiagnostyka; ocena; porównanie

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2020
• Tom: z. 106
• Strony: 183--196
• Opis fizyczny: Bibliogr. 12 poz.

Twórcy

autor

Šulka Peter

• Faculty of Mechanical Engineering, The University of Žilina, Univerzitná 8215/1, Žilina, Slovakia

autor

Sapietová Alžbeta

• Faculty of Mechanical Engineering, The University of Žilina, Univerzitná 8215/1, Žilina, Slovakia

autor

Bárnik František

• Faculty of Mechanical Engineering, The University of Žilina, Univerzitná 8215/1, Žilina, Slovakia

Bibliografia

• 1. Bensana T., S. Mekhilef. 2016. “Numerical and experimental analysis of vibratory signals for rolling bearing fault diagnosis”. Mechanika 22(3): 217-224. ISSN 1392-1207.
• 2. Dekýš Vladimír, Peter Kalman, Pavol Hanák, Pavol Novák, Zuzana Stankovičová. 2016. „Determination of vibration sources by using STFT”. Procedia Engineering 177: 496-501. ISSN 1877 7058. DOI: https://doi.org/10.1016/j.proeng.2017.02.251.
• 3. Figlus T., M. Stańczyk. 2016. “A method for detecting damage to rolling bearings in toothed gears of processing lines”. Metalurgija 55(1): 75-78.
• 4. Frankovský, P., D. Hroncová, I. Delyová, P. Hudák. 2012. „Inverse and forward dynamic analysis of two link manipulator”. Proceedia Engineering 48: 158-163.
• 5. Homišin Jaroslav, Robert Grega, Peter Kaššay, Gabriel Fedorko, Vieroslav Molnár. 2019 „Removal of systematic failure of belt conveyor drive by reducing vibrations”. Engineering Failure Analysis 99: 192-202. ISSN 1350-6307.
• 6. Kosicka E., Kozłowski E., Mazurkiewicz D. 2015. „The use of stationary tests for analysis of monitored residual processes”. Eksploatacja i Niezawodnosc – Maintenance and Reliability 17(4): 604–609. DOI: http://dx.doi.org/10.17531/ein.2015.4.17.
• 7. Močilan Martin, Milan Žmindák, Peter Pastorek, 2016. „Dynamic analysis of fuel tank”. Proceedia Engineering 136: 45-49. ISSN 1877-7058. 20th International conference machine modeling and simulations “MMS 2015”. Terchova, Slovakia.
• 8. Sága Milan, Róbert Bednár, Milan Vaško. 2011. „Contribution to Modal and Spectral Interval Finite Element Analysis”. Vibration Problems ICOVP 2011 Springer Proceedings in Physics 139: 269-274. Edited by Jiŕí Náprstek, Jaromír Horáček, Miloslav Okrouhlík, Bohdana Marvalová, Ferdinand Verhulst, Jerzy T. Sawicki. Springer, Dordrecht. ISBN 978-94-007-2069-5. DOI : https://doi.org/10.1007/978-94-007-2069-5_37.
• 9. Sága Milan, Peter Kopas, Milan Uhričík. 2012. „Modeling and experimental analysis of the aluminium alloy fatigue damage in the case of bending - torsion loading”. Procedia Engineering 48: 599-606. ISSN 1877-7058. DOI: https://doi.org/10.1016/j.proeng.2012.09.559.
• 10. Urbanský Matej, Jaroslav Homišin, Peter Kaššay, Jozef Krajňák. 2018. „Measurement of air springs volume using indirect method in the design of selected pneumatic devices”. Acta Mechanica et Automatica 12(1): 19-22. ISSN 1898-4088.
• 11. Vavro Ján jr., Ján Vavro, Petra Kováčiková, Radka Bezdedová. 2016. „Kinematic and dynamic analysis of the manipulator for removal of rough tyres”. Proceedia Engineering 136: 120-124. ISSN 1877-7058. DOI: 10.1016/j.proeng.2016.01.184. 20th International conference machine modelling and simulations “MMS 2015”. Terchova, Slovakia.
• 12. Zieja Mariusz, Paweł Gołda, Mariusz Żokowski, Paweł Majewski. 2017. „Vibroacoustic technique for the fault diagnosis in a gear transmission of a military helicopter”. Journal of Vibroengineering 19(2): 1039-1049.