Implementation of lean instruments in ceramics industries

• Autorzy: Ulewicz Robert , Kleszcz Daniel , Ulewicz Małgorzata

Identyfikatory

DOI

10.2478/mspe-2021-0025

• Języki publikacji: EN

Abstrakty

EN

The article presents the results of the research on the level of implementation of Lean instruments in the ceramics industry. The research was carried out in ceramic factories in Poland and Germany. Based on the results obtained, the most commonly used Lean instruments in the ceramics industry were defined. The dependence of the use of Lean instruments on the size of the enterprise was also determined. It was established that the Lean activities undertaken in the ceramics industry are focused solely on the implementation of individual methods and tools, without a pre-defined goal. This approach in the ceramics industry is ineffective, but unfortunately it is most often used in the implementation of the Lean philosophy, especially in small ceramics enterprises.

Słowa kluczowe

EN

ceramics industry; SME's; Lean instruments; Lean implementation

• Wydawca: STE GROUP
• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2021
• Tom: nr 3 (29)
• Strony: 203--207
• Opis fizyczny: Bibliogr. 35 poz., rys., tab.

Twórcy

autor

Ulewicz Robert

• Czestochowa University of Technology Department of Production Engineering and Safety ul. Armii Krajowej 19 B, 42-200 Częstochowa, Poland

autor

Kleszcz Daniel

• Ceramik Sp. z o o. Jana Andrzeja Morsztyna 6, 42-209 Częstochowa, Poland

autor

Ulewicz Małgorzata

• Czestochowa University of Technology Faculty of Civil Engineering ul. Akademicka 3, 42-201 Częstochowa, Poland

Bibliografia

• [1] R. Ulewicz, D. Jelonek, and M. Mazur, “Implementation of logic flow in planning and production control,” Manag. Prod. Eng. Rev., vol. 7, no. 1, pp. 89-94, Mar. 2016.
• [2] K. Knop, “Importance of visual management in metal and automotive branch and its influence in building a competitive advantage,” Polish J. Manag. Stud., vol. 22, no. 1, pp. 263-278, Dec. 2020.
• [3] N. Baryshnikova, O. Kiriliuk, and D. Klimecka-Tatar, “Enterprises’ strategies transformation in the real sector of the economy in the context of the COVID-19 pandemic,” Prod. Eng. Arch., vol. 27, no. 1, pp. 8-15, Mar. 2021.
• [4] I. Belekoukias, J. A. Garza-Reyes, and V. Kumar, “The impact of lean methods and tools on the operational performance of manufacturing organisations,” Int. J. Prod. Res., vol. 52, no. 18, pp. 5346-5366, Sep. 2014.
• [5] A. Maszke, R. Dwornicka, and R. Ulewicz, “Problems in the implementation of the lean concept at a steel works – Case study,” in MATEC Web of Conferences, 2018, vol. 183.
• [6] M. Nowicka-Skowron and R. Ulewicz, “Problems in the implementation of lean concept in the metal industry companies,” in METAL 2016. 25th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings, 2016, pp. 1962-1967.
• [7] S. Sadiq, M. S. Amjad, M. Z. Rafique, S. Hussain, U. Yasmeen, and M. A. Khan, “An integrated framework for lean manufacturing in relation with blue ocean manufacturing – A case study,” J. Clean. Prod., vol. 279, Jan. 2021.
• [8] A. Purwanto et al., “Lean six sigma model for pharmacy manufacturing: Yesterday, today and tomorrow,” Syst. Rev. Pharm., vol. 11, no. 8, pp. 304-313, Sep. 2020.
• [9] R. Ulewicz and R. Kucȩba, “Identification of problems of implementation of Lean concept in the SME sector,” Eng. Manag. Prod. Serv., vol. 8, no. 1, pp. 19-25, 2016.
• [10] S. Singh and K. Kumar, “Review of literature of lean construction and lean tools using systematic literature review technique (2008-2018),” Ain Shams Engineering Journal, vol. 11, no. 2. Ain Shams University, pp. 465-471, 01-Jun-2020.
• [11] D. Siwiec and A. Pacana, “Method of improve the level of product quality,” Prod. Eng. Arch., vol. 27, no. 1, pp. 1-7, Mar. 2021.
• [12] A. Pacana, “Comprehensive Improvement Of The Surface Quality Of The Diesel Engine Piston,” Hrvatsko Metalursko Društvo (HMD), Jul. 2019.
• [13] O. P. Maslova, T. A. Ilyina, V. A. Krichmar, and E. G. Safronov, “Implementing lean manufacturing and solving motivation problems in russian companies,” in Lecture Notes in Networks and Systems, vol. 139, Springer, 2021, pp. 384-391.
• [14] I. Leksic, N. Stefanic, and I. Veza, “The impact of using different lean manufacturing tools on waste reduction,” Adv. Prod. Eng. Manag., vol. 15, no. 1, pp. 81-92, Mar. 2020.
• [15] T. A. Tran, K. Luu-Nhan, R. Ghabour, and M. Daroczi, “The use of Lean Six-Sigma tools in the improvement of a manufacturing company – Case study,” Prod. Eng. Arch., vol. 26, no. 1, pp. 30-35, Mar. 2020.
• [16] B. Zhang, Z. Niu, and C. Liu, “Lean tools, knowledge management, and lean sustainability: The moderating effects of study conventions,” Sustain., vol. 12, no. 3, p. 956, Feb. 2020.
• [17] M. Mazur and H. Momeni, “LEAN Production issues in the organization of the company – results,” Prod. Eng. Arch., vol. 22, no. 22, pp. 50-53, Mar. 2019.
• [18] M. Mazur and H. Momeni, “LEAN Production issues in the organization of the company – the first stage,” Prod. Eng. Arch., vol. 21, no. 21, pp. 36-39, Dec. 2018.
• [19] A. C. Gavriluţă, E. L. Niţu, and C. A. Gavriluţă, “Algorithm to Use Some Specific Lean Manufacturing Methods: Application in an Industrial Production Process,” Processes, vol. 9, no. 4, p. 641, Apr. 2021.
• [20] D. Kleszcz, “Assessment of application of 5S practices in ceramic industry,” Prod. Eng. Arch., vol. 16, no. 16, pp. 47- 51, Sep. 2017.
• [21] D. Klimecka-Tatar, “Context of production engineering in management model of Value Stream Flow according to manufacturing industry,” Prod. Eng. Arch., vol. 21, no. 21, pp. 32-35, Dec. 2018.
• [22] D. Kleszcz, “Barriers and opportunities in implementation of Lean Manufacturing tools in the ceramic industry,” Prod. Eng. Arch., vol. 19, no. 19, pp. 48-52, Jun. 2018.
• [23] S. Taj, “Lean manufacturing performance in China: Assessment of 65 manufacturing plants,” J. Manuf. Technol. Manag., vol. 19, no. 2, pp. 217-234, 2008.
• [24] B. Haque and M. James-Moore, “Applying Lean Thinking to new product introduction,” Journal of Engineering Design, vol. 15, no. 1. pp. 1-31, Feb-2004.
• [25] M. Holweg, “The genealogy of lean production,” J. Oper. Manag., vol. 25, no. 2, pp. 420-437, Mar. 2007.
• [26] J. Bhamu, J. V. S. Kumar, and K. S. Sangwan, “Productivity and quality improvement through value stream mapping: A case study of Indian automotive industry,” Int. J. Product. Qual. Manag., vol. 10, no. 3, pp. 288-306, 2012.
• [27] E. Järvenpää and M. Lanz, “Lean Manufacturing and Sustainable Development,” 2019, pp. 1-10.
• [28] R. Shah and P. T. Ward, “Lean manufacturing: Context, practice bundles, and performance,” J. Oper. Manag., vol. 21, no. 2, pp. 129-149, Mar. 2003.
• [29] T. Melton, “The benefits of lean manufacturing: What lean thinking has to offer the process industries,” Chem. Eng. Res. Des., vol. 83, no. 6 A, pp. 662-673, 2005.
• [30] M. G. Yang, P. Hong, and S. B. Modi, “Impact of lean manufacturing and environmental management on business performance: An empirical study of manufacturing firms,” Int. J. Prod. Econ., vol. 129, no. 2, pp. 251-261, Feb. 2011.
• [31] S. J. Pavnaskar, J. K. Gershenson, and A. B. Jambekar, “Classification scheme for lean manufacturing tools,” Int. J. Prod. Res., vol. 41, no. 13, pp. 3075-3090, Sep. 2003.
• [32] T. Bonavia and J. A. Marin, “An empirical study of lean production in the ceramic tile industry in Spain,” Int. J. Oper. Prod. Manag., vol. 26, no. 5, pp. 505-531, 2006.
• [33] D. Kleszcz, M. Zasadzień, and R. Ulewicz, “Lean Manufacturing in the ceramic industry,” Multidiscip. Asp. Prod. Eng., vol. 2, no. 1, pp. 457-466, Sep. 2019.
• [34] R. Ulewicz and M. Ulewicz, “Problems in the Implementation of the Lean Concept in the Construction Industries,” in Lecture Notes in Civil Engineering, vol. 47, Springer, 2020, pp. 495-500.
• [35] K. Babu, A. Thirugnanam, and S. P. Sivam, “Lean process management implementation in ceramic industry,” Int. J. Chem. Sci., vol. 14, pp. 415-430, 2016.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).