Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The paper deals with the problem of water separation from a mixture of wet loose material using a worm, or auger, dewaterer, whose working element is a full auger with variable thread pitch, rotating in a fixed trough. The extrusion of water from the wet material suspension, consisting of a mixture of mineral wool tufts and granules, is effected in the auger dewaterer by entraining and compressing the wet bulk material through the threads, the varied pitch of the conical screw, and the rotation of the auger.The thread faces and thread edges of an improperly designed screw of the auger dewaterer by Advanced Metal Powders s.r.o. showed notable wear from the applied pressure of the packed wet bulk material (passing through the threads of the different pitch of the conical auger). Finding the cause of the severe abrasion and preventing excessive further wear of the auger was the subject of theoretical calculations and experimental verification tests, whose main conclusions are presented in this paper. The paper gives the relations that allow calculation of the volume of bulk material in individual sections of the auger dewaterer. The calculated values from these relationships, were verified and compared with the values read from the 3D CAD system for designing SolidWorks Premium 2012 SP 5.0 models.The percentage compression values of the loose material in the threads of differential pitch of the conical auger of the unsuitably designed auger-screw dewaterer by Advanced Metal Powders s.r.o. allowed us to define recommendations that, applied, would ensure malfunction-free operation of the auger-screw dewaterer.
Wydawca
Rocznik
Tom
Strony
58--67
Opis fizyczny
Bibliogr. 9 poz., fig., tab.
Twórcy
autor
- VSB Technical University of Ostrava, Faculty of Mechanical Engineering, Institute of Transport, 17. listopadu 2172/15, 708 00 Ostrava – Poruba, Czech Republic
autor
- VSB Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Production Machines and Design, 17. listopadu 2172/15, 708 00 Ostrava – Poruba, Czech Republic
autor
- VSB Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Production Machines and Design, 17. listopadu 2172/15, 708 00 Ostrava – Poruba, Czech Republic
autor
- Advanced Metal Powders s.r.o., Sládkova 372/8, 702 00 Moravská Ostrava
Bibliografia
- 1. Badalova M. and Dobrovolna J. Recyklace minerálnich vláken z odpadu. In: 5. Odborna konference doktorského studia s mezinárodni účasti. Brno, 2003, 17–20, (In Czech).
- 2. Durna A., Fries J., Hrabovsky L., Sliva A. and Zarnovsky J. Research and development of laser engraving and material cutting machine from 3D printer. Management Systems in Production Engineering, 28(1), 2020, 47–52.
- 3. Hrabovsky L., Kulka J. and Michalik P. Device for determining the adhesion coefficient at the slippage point. IOP Conference Series: Materials Science and Engineering, 603 (5), 2019, 1–7.
- 4. Kulka J., Mantic M., Kopas M., Faltinova E. and Hrabovsky L. Simulation-expertise analysis of ropes used in the horizontal belaying system. Scientific Journal of Silesian University of Technology. Series Transport, 103, 2019, 53–67.
- 5. Alibaba Producs. Available at: https://www.alibaba.com/product-detail/meat-canning-sewage-treatment-plant-sludge_60547584989.html (Access: 21.05.2020).
- 6. Dewatering Squeezer. Available at: http:// shredding-machine.com/index.php/product/dewateringscrew-press/ (Access: 28.05.2020).
- 7. Hubercs-CZ. Available at: https://www. hubercs. cz/cz/produkty/zpracovani-kalu/odvodneni.html (in Czech) (Access: 28.05.2020).
- 8. Mineralni Vata. Available at: http://www.stavebniny-rychle.cz/jak-probiha-vyroba-mineralnivlny-znacky-isover.html (in Czech) (Access: 20.02.2020).
- 9. stavba-tzb. Available at: https://stavba.tzb-info.cz/ tepelne-izolace/11827-vyuziti-odpadnich-materialu-z-vyroby-mineralni-vlny-do-stavebnich-hmot (in Czech) (Access: 17.04.2020).
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-70034097-95d4-43fe-a5f7-f6f0f9a78bbc