PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Graphene oxide film as semi-transparent counter electrode for dye-sensitized solar cell

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Purpose: The aim of the paper is to fabricate semi-transparent graphene oxide counter electrodes for dye-sensitized solar cells. Design/methodology/approach: A thermal reduction is applied to decreased the amount of surface oxygen functionalities on graphene sheets. For this purpose thermal treatments in oven in 250°C and 500°C were used. Graphene oxide materials were mixed with PEDOT:PSS and then deposited on FTO glass by spin coating method. PEDOT:PSS was added to graphene oxide to increase conductivity and enhance film forming ability. Findings: Ultraviolet-visible spectroscopy measurement was carried out to monitor the degree of oxidation for the graphene samples. It has been found that annealing of graphene oxide counter electrodes under inert atmospheres enable a better ordering of graphene oxide films and also cause losing an oxygen functional groups, that makes layers become denser and smother, with a lower surface roughness, and thus less transparent. Research limitations/implications: It has been found that due to development of the technology of dye-sensitized solar cells with graphene oxide counter electrode, it is possible to lowering a production costs by replacing a costly platinum. It is advisable to take into account in the further experiments application of counter electrode on different kinds of substrates in the selected process parameters, and research for using them in DSSC cells mass production. Practical implications: DSSC cells are an interesting alternative to silicon solar cells. Presented in this paper results showed possibilities of modify dye-sensitized solar cells by replacing costly platinum. Originality/value: It was shown that dye-sensitized solar cells with graphene oxide counter electrode can be used in building integrated photovoltaic.
Rocznik
Strony
13--20
Opis fizyczny
Bibliogr. 40 poz., rys., tab.
Twórcy
  • Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland
  • Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland
  • Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland
autor
  • Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland
autor
  • Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland
Bibliografia
  • [1] M. Musztyfaga-Staszuk, L.A. Dobrzański, The use of laser technology to shape properties of the contacts of silicon solar cells and their structure, Central European Journal of Physics 12/12 (2014) 836-841.
  • [2] M. Musztyfaga, L.A. Dobrzański, S. Rusz, M. Staszuk, Application examples for the different measurement modes of electrical properties of the solar cells, Archives of Metallurgy and Materials 59/1 (2014) 247-252.
  • [3] L.A. Dobrzański, M. Giedroć, A. Drygała, Application of crystalline silicon solar cells in photovoltaic modules, Archives of Materials Science and Engineering 44/2 (2010) 69-103.
  • [4] L.A. Dobrzański, A. Drygała, M. Prokopiuk vel Prokopowicz, Archives of Materials Science and Engineering 62/2 (2013) 53-59.
  • [5] M. Grätzel, Photoelectrochemical cells, Nature 414 (2001) 338-344.
  • [6] M. Grätzel, Review: Dye-sensitized solar cells, Journal of Photochemistry and Photobiology C: Photochemistry Reviews 4 (2003), 145-153.H. Desilvestro, Y. Hebting, M. Khan, D. Milliken, Understanding and successfully applying materials for dye-sensitized solar cells, Materials Matters 9/1 (2014) 14-18.
  • [7] Y. Jiao, F. Zhang, S. Meng, L.A. Kosyachenko (Ed.),Dye Sensitized Solar Cells Principles and New Design, Solar Cells-Dye-Sensitized Devices, ISBN: 978-953-307-735-2.
  • [8] E. Jia, Dye-sensitized solar cells, the future of renewable energy in context with photovoltaics, Cosmos 8: The chemistry of life (2013) 2-15.
  • [9] L.A. Dobrzański, A. Mucha, M. Prokopiuk vel Prokopowicz, A. Drygała, K. Lukaszkowicz, Technology of dye-sensitized solar cells with carbon nanotubes, Archives of Materials Science and Engineering 70/2 (2014) 70-76.
  • [10] J. Gong, J. Liang, K. Sumathy, Review on dye-sensitized solar cells (DSSCs): Fundamental concepts and novel materials, Renewable and Sustainable Energy Reviews 16 (2012) 5848-5860.
  • [11] A. Yella, H-W. Lee, H.N. Tsao, C. Yi, A.K. Chandiran, M.K. Nazeeruddin, E.W-G. Diau, C.Y. Yeh, S.M. Nazeeruffin, M. Gratzel, Porphyrin-sensitized solar cells with cobalt (II/III)-based redox electrolyte exceed 12 percent efficiency, Science 334 (2011) 639-634.
  • [12] W. Shu, Y. Liu, Z. Peng, K. Chen, C. Zhang, W. Chen, Synthesis and photovoltaic performance of reduced graphene oxide-TiO2 nanoparticles composites by solvothermal method, Journal of Alloys and Compounds 563 (2013) 229-233.
  • [13] K. Nazeeruddin, R. Splivallo, P. Liska, P. Comte, M. Grätzel, A swift dye uptake procedure for dye sensitized solar cells, Chemical Communications (2003) 1456-1457.
  • [14] S. Sheehan, P.K. Surolia, O. Byrne, S. Garner, P. Cimo, X. Li, Flexible glass substrate based dye sensitized solar cells, Solar Energy Materials & Solar Cells 132 (2015) 237-244.
  • [15] M. Sima, E. Vasile, A. Sima, Photoanode for dye-sensitized solar cell based on electrophoretically deposited ZnO layer, Digest Journal of Nanomaterials and Biostructures 8/2 (2013) 757-763.
  • [16] W. Kylberg, Photo-electrochemical surface modification and analysis of dye-sensitized solar cells, PhD thesis, Sweden 2008.
  • [17] S.E. Saddow, Silicon Carbide Biotechnology-A Biocompatible Semiconductor for Advanced Biomedical Devices and Applications, Carbon Based Materials on SiC for Advanced Biomedical Applications, Elselver 2012.
  • [18] J.H. Warner, F. Schäffel, A. Bachmatiuk, M.H. Rümmeli, Graphene Fundamentals and Emergent Applications, Elselvier 2013.
  • [19] B. Trauzettel, From graphite to graphene, Physics Journal 6/7 (2007).
  • [20] G. Eda, Y-Y. Lin, C. Mattevi, H. Yamaguchi, H.A. Chen, I-S. Chen, C-W. Chen, M. Chhowalla, Blue Photoluminescence from Chemically Derived Graphene Oxide, Advanced Materials 22 (2010) 505-509.
  • [21] J. Gozdek, Graphene: wonderful materials without sectrets, Chip.pl 11 (2013).
  • [22] Seung Hun Huh, Thermal Reduction of Graphene Oxide, Physics Applications of Graphene-Experiments.
  • [23] Y. Xu, K. Sheng, C. Li, G. Shi, Highly conductive chemically converted graphene prepared from mildly oxidized graphene oxide, Journal of Materials Chemistry 21 (2011) 7376-7380.
  • [24] K. Gotoh, T. Kinumoto, E. Fuji, A. Yamamoto, H. Hashimoto, T. Ohkubo, A. Itadani, Y. Kuroda, H. Ishida, Exfoliated graphene sheets decorated with metal/metal oxide nanoparticles: Simple preparation from cation exchanged graphite oxide, Carbon 49 (2011) 1118-1125.
  • [25] O. Akhavan, The effect of heat treatment on formation of graphene thin films from graphene oxide nanosheets, Carbon 48 (2010) 509-519.
  • [26] H. Wang, K. Sun, F. Tao, D.J. Stacchiola, Y.H. Hu, 3D Honeycomb-Like Structured Graphene and Its High Efficiency as a Counter-Electrode Catalyst for Dye-Sensitized Solar Cells, Angewandte Chemie International Edition 52/ 35 (2013) 9210-9214.
  • [27] C.T. Hsieh, B.H. Yang, Y.F. Chen, Dye-sensitized solar cells equipped with graphene-based counter electrodes with different oxidation level, Diamond & Related Materials 27-28 (2012) 68-75.
  • [28] D.W. Zhang, X.D. Li, H.B. Li, S. Chen, Z. Sun, X.J. Yin, S.M. Huang, Graphene-based counter electrode for dye-sensitized solar cells, Carbon 49(2011) 5382-5388.
  • [29] H.S. Jang, J.M. Yun, D.Y Kim, D.W. Park, S.I. Na, S.S. Kim, Moderately reduced graphene oxide as transparent counter electrodes for dye-sensitized solar cells, Electrochimica Acta 81 (2012) 301-307.
  • [30] Z.Y. Li, M.S. Akhtar, J.H Kuk, B.S. Kong, O.B. Yang, Graphene application as a counter electrode material for dye-sensitized solar cell, Material Letters 86 (2012) 96-99.
  • [31] L. Wan, S. Wang, X, Wang, B. Dong, Z. Xu, X. Zhang, B. Yang, S. Peng, J. Wang, C. Xu, Room-temperature fabrication of graphene films on variable substrates and its use as counter electrodes for dye-sensitized solar cells, Sold State Sciences 13 (2011) 468-475.
  • [32] W. Hong, Y. Xu, G. Lu, C. Li, G. Shi, Transparent graphene/PEDOT-PSS composite films as counter electrodes of dye-sensitized solar cells, Electrochemistry Communications 10 (2008) 1555-1558.
  • [33] M. Zhu, X. Li, W. Liu, Y. Cui, An investigation on the photoelectrochemical properties of dye-sensitized solar cells based on graphene-TiO2composite photoanodes, Journal of Power Sources 262 (2014) 349-355.
  • [34] S. Satapathi, H.S. Gill, S. Das, L. Li, L. Samuelson, M.J. Green, J. Kumar, Performance enhancement of dye-sensitized solar cells by incorporating graphene sheets of various sizes, Applied Surface Science 314 (2014) 638-641.
  • [35] M. Song, H.K. Seo, S. Ameen, M.S. Akhtar, H.S. Shin, Low resistance transparent graphene-like carbon thin film substates for high performance dye sensitized solar cells, Electrochimica Acta 115 (2014) 559-565.
  • [36] X. Fang, M. Li, K. Guo, Y. Zhu, Z. Hu, X. Li, B. Chen, X. Zhao, Improved properties of dye-sensitized solar cells by incorporation of graphene into the photoelectrodes, Electrochimica Acta 65 (2012) 174-178.
  • [37] J. Zhao, J. Wu. M. Zheng, J. Huo, Y. Tu, Improving the photovoltaic performance of dye-sensitized solar cell by graphene/titania photoanode, Electrochimica Acta 156 (2015) 261-266.
  • [38] H. Choi, H. Kim, S. Hwang, W. Choi, M. Jeon, Dye-sensitized solar cells using graphene-based carbon nano composite as counter electrode, Solar Energy Materials & Solar Cells 95 (2011) 323-325.
  • [39] R. Cruz, D.A. Pacheco Tanaka, A. Mendes, Reduced graphene oxide films as transparent counter-electrodes for dye-sensitized solar cells, Solar Energy 86 (2012) 716-724.
  • [40] K-H. Hung, C-H, Chan, H-W. Wang, Flexible TCO-free counter electrode for dye sensitized solar cells using graphene nanosheets from a Ti-Ti(III) acid solution, Renewable Energy 66 (2014) 150-158.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-6fec067e-4729-47aa-aa80-7a463e96b3ba
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.