PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Kinetics models of hydrogen sulphide adsorption from hydrogel biochar derived from empty fruit bunch (EFB)

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Purpose: This research aims to investigate the detailed state of adsorption kinetics modelling and research on the application of hydrogen sulfide adsorption by hydrogel derived from empty fruit bunch (EFB), the determination of the kinetics parameters, and the comparison between models in a selection of the best-fit model. Design/methodology/approach: The kinetics modelling used are pseudo-first-order and pseudo-second-order models. The correlation coefficient was used to evaluate the suitability of the equation R2. After obtaining the results, the comparison was made by comparing the R2 of each model. The pseudo-second-order model has a higher value of correlation coefficient, R2, making it the most suitable kinetics model for adsorption systems. Findings: The R2 for pseudo-first-order on the effect of dry bed height was 0.8814, whereas its effect on powder bed height was 0.9537, and that of the wet bed height was 0.9607. Meanwhile, the R2 for pseudo-second-order on the effect of dry bed height was 0.89, on the effect of the powder bed height was 0.99, and on the effect of the bed height of wet was 0.99, the highest among kinetic models. Based on the results, the pseudo-second-order model best describes the adsorption of hydrogen sulfide (H2S) by hydrogel biochar. Research limitations/implications: The kinetics modelling used are pseudo-first-order, and pseudo-second-order models for hydrogen sulfide adsorption by hydrogel originating from empty fruit bunches (EFB). Practical implications: Based on the results, the pseudo-second-order model best describes the adsorption of hydrogen sulfide (H2S) by hydrogel biochar. Kinetic studies are important in understanding the reactions and design of the process. Originality/value: The authenticity results of this article were found to be 17% similar. The novelty of this paper is the kinetics study of the new adsorbent developed based on EFB to adsorb H2S.
Rocznik
Strony
15--21
Opis fizyczny
Bibliogr. 16 poz.
Twórcy
autor
  • Industrial Process Reliability & Sustainability (INPRES) Research Group, School of Chemical Engineering, College of Engineering, Universiti Teknologi MARA, Shah Alam, 40450 Selangor, Malaysia
autor
  • Industrial Process Reliability & Sustainability (INPRES) Research Group, School of Chemical Engineering, College of Engineering, Universiti Teknologi MARA, Shah Alam, 40450 Selangor, Malaysia
  • Industrial Process Reliability & Sustainability (INPRES) Research Group, School of Chemical Engineering, College of Engineering, Universiti Teknologi MARA, Shah Alam, 40450 Selangor, Malaysia
autor
  • Industrial Process Reliability & Sustainability (INPRES) Research Group, School of Chemical Engineering, College of Engineering, Universiti Teknologi MARA, Shah Alam, 40450 Selangor, Malaysia
Bibliografia
  • [1] F. Fahma, I. Febiyanti, N. Lisdayana, I.W. Arnata, D. Sartika, Nanocellulose as a new sustainable material for various applications: A review, Archives of Materials Science and Engineering 109/2 (2021) 49-64. DOI: https://doi.org/10.5604/01.3001.0015.2624
  • [2] A.B. Alias, M. Ariff, A. Hamzah, N.H. Meri, N. Muhammad, F. Mat, Modelling of Adsorption Kinetic and Equilibrium Isotherms of Hydrogen Sulfide onto Hydrogel Biochar Adsorbent, International Journal of Engineering and Technology 7/4.18 (2018) 369-375.
  • [3] G.W. Kajjumba, S. Emik, A. Öngen, H.K. Özcan, S. Aydan, Modelling of Adsorption Kinetic Processes ‒ Errors, Theory and Application, in: S. Edebali (ed), Advanced Sorption Process Applications, IntechOpen, London, 2019, 1-19. DOI: https://doi.org/10.5772/intechopen.80495
  • [4] A.G. Georgiadis, N.D. Charisiou, M.A. Goula, Removal of Hydrogen Sulfide from Various Industrial Gases: A Review of the Most Promising Adsorbing Materials, Catalysts 10/5 (2020) 521. DOI: https://doi.org/10.3390/catal10050521
  • [5] T. Nuraiti, T. Izhar, Adsorption of Hydrogen Sulfide (H2S) from Municipal Solid Waste by Using Biochars, Biointerface Research in Applied Chemistry 12/6 (2022) 8057-8069. DOI: https://doi.org/10.33263/BRIAC126.80578069
  • [6] D.Q. A’yuni, A. Subagio, H. Hadiyanto, A.C. Kumoro, M. Djaeni, Microstructure silica leached by naoh from semi-burned rice husk ash for moisture adsorbent, Archives of Materials Science and Engineering 108/1 (2021) 5-15. DOI: https://doi.org/10.5604/01.3001.0015.0248
  • [7] O.A. Habeeb, K. Ramesh, G.A.M. Ali, R.M. Yunus, O.A. Olalere, Kinetic, isotherm and equilibrium study of adsorption capacity of hydrogen sulfide-wastewater system using modified eggshells, IIUM Engineering Journal 18/1 (2017) 13-25. DOI: https://doi.org/10.31436/iiumej.v18i1.689
  • [8] V.V. Tran, D. Park, Y.-C. Lee, Hydrogel Applications for Adsorption of Contaminants in Water and Wastewater Treatment, Environmental Science and Pollution Research 25 (2018) 24569-24599. DOI: https://doi.org/10.1007/s11356-018-2605-y
  • [9] N.H. Meri, Adsorption Of Hydrogen Sulphide (H2S) By Empty Fruit Bunch Hydrogel Biochar Composite (EFB-HBC), MSc Thesis, Universiti Teknologi Mara (UiTM), Malaysia, 2019.
  • [10] E. David, C. Sandru, A. Armeanu, Zeolitization characteristics of fly ash and its use to manufacture porous materials, Archives of Materials Science and Engineering 90/2 (2018) 56-67. DOI: https://doi.org/10.5604/01.3001.0012.0663
  • [11] S. Guofeng, L. Liu, P. Chen, G. Shen, Q. Li, Kinetics and the Mass Transfer Mechanism of Hydrogen Sulfide Removal by Biochar Derived from Rice Hull, Journal of the Air and Waste Management Association 66/5 (2016) 439-445. DOI: https://doi.org/10.1080/10962247.2015.1122670
  • [12] Z. Pan, J.H. Duan, G.H. Chen, W.W. Wang, Effect of Bed Characters on the Direct Synthesis of Dimethyldichlorosilane in Fluidized Bed Reactor, Scientific Reports 5 (2015) 8827. DOI: https://doi.org/10.1038/srep08827
  • [13] N.B. Juli, N. Talib, N. Ahmad, A.B. Alias, Monte Carlo simulation hydrogen sulphide gad adsorption by using hydrogel biochar, Egyptian Journal of Chemistry 64/6 (2021) 2789-2796. DOI: https://doi.org/10.21608/ejchem.2021.54278.3129
  • [14] N.M.F.M. Yasin, N.H. Meri, N. Talib, W.A.W.A.K. Ghani, Z.A. Rashid, A.B. Alias, Breakthrough Analysis of Empty Fruit Bunch-Based Hydrogel Biochar Composite (EFB-HBC) for Hydrogen Sulphide (H2S) Adsorption Study Removal, Advances in Engineering Research 200 (2021) 216-225. DOI: https://doi.org/10.2991/aer.k.201229.030
  • [15] M. Szindler, M.M. Szindler, L.A. Dobrzariski, T. Jung, NiO nanoparticles prepared by the sol-gel method for a dye sensitized solar cell applications, Archives of Materials Science and Engineering 92/1 (2018) 15-21. DOI: https://doi.org/10.5604/01.3001.0012.5507
  • [16] V.S. Prabhin, K. Jeyasubramanian, N.R. Romulus, N.N. Singh, Fabrication of dye sensitized solar cell using chemically tuned CuO nanoparticles prepared by sol-gel method, Archives of Materials Science and Engineering 83/1 (2017) 5-9. DOI: https://doi.org/10.5604/01.3001.0009.7535
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-6fb6d76c-5b46-47f7-b845-4231ef71d9e5
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.