Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Polyurethanes are materials usable in wide spectrum of applications. This article is aimed at the properties tailoring of selected polymers by an alteration in initial materials. To achieve that goal, we proposed form the polyurethane matrix by mixing materials that have a different ratio of the initial components. Mathematical model has been developed that describes relationship of structure and strength, deformation, rheological and tribotechnical characteristics of linear block-polyurethanes based on oligoether blends. Oligoethers blend samples were obtained by injection moulding on an automatic thermoplastication machine with varying proportions of the starting components over the whole concentration range. A significant change of properties over the whole concentration range was observed and compositions with unique combination of characteristics have been determined. Obtained dependencies allow to predict the composition of the binary mixture with a tailored level of strength, deformation, rheological and tribotechnical characteristics. The obtained results are fully consistent with the practical experience of processing and exploitation of initial polyurethanes.
Wydawca
Czasopismo
Rocznik
Tom
Strony
217--220
Opis fizyczny
Bibliogr. 21 poz., rys., tab.
Twórcy
- Ukrainian State Chemical Technology University 8 Gagarina Ave., 49005 Dnipropetrovsk, Ukraine
- Ukrainian State Chemical Technology University 8 Gagarina Ave., 49005 Dnipropetrovsk, Ukraine
autor
- Technical University of Kosice Faculty of Manufacturing Technologies with a seat in Presov Sturova 31, 08001 Presov, Slovak Republic
Bibliografia
- [1] V. Anisimov. "Properties of Thermoplastic Polyurethanes based on the Mixtures of simple Oligoethers". Chemistry&Chemical Technology, vol.6, no. 3, pp. 281-283, 2012.
- [2] I.N. Bakirova and E.I. Galeeva. “A polyurethane sealant based on sulfur-containing oligoether urethane regenerate”. Polymer Science - Series D, vol. 5, no. 1, pp. 42-45, 2012.
- [3] K.V. Berladir, A.O. Budnik, K.A. Dyadyura, V.A. Svidersky and Y.O. Kravchenko. "Physicochemical principles of the technology of formation of polymer composite materials based on polytetrafluoroethylene − a review". High Temp. Mater. Process., vol. 20, no. 2, pp. 157-184, 2016.
- [4] P. Cacko, T. Krenicky. “Impact of lubrication interval to operating status of bearing”. Applied Mechanics and Materials. vol. 616, pp. 151-158, 2014. ISSN 1660-9336
- [5] M. Durdan, B. Stehlíkova, M. Pastor, J. Kacur, M. Laciak, P. Flegner. "Research of annealing process in laboratory conditions." Measurement, vol. 73, p. 607-618, 2015. ISSN 0263- 2241.
- [6] K.A. Dyadyura, K.V. Berladir, P.V. Rudenko, O.A. Budnik, V.A. Sviderskij. “Research of properties of composite material based on polytetrafluoroethylene filled with carbon fiber with titanium nanocoating”. In: International Conference on Nanomaterials: Application & Properties (NAP) 2016, Sept. 14-19, 2016, Lviv, Ukraine. DOI: 10.1109/NAP.2016.7757305.
- [7] J. Jurko, M. Dzupon, A. Panda, M. Gajdos and I. Pandova. "Deformation of Material Under the Machined Surface in the Manufacture of Drilling Holes in Austenitic Stainless Steel". Chemické listy: Material in Engineering Practice, vol. 105, no. 16, pp. 600-602, 2011.
- [8] J. Jurko, M. Dzupon, A. Panda and J. Zajac. "Study Influence of Plastic Deformation a New Extra Low Carbon Stainless Steels XCr17Ni7MoTiN under the Surface Finish when Drilling". Advanced Materials Research, vols. 538-541, pp. 1312-1315, 2012.
- [9] J. Jurko, A. Panda, J. Valicek, M. Harnicarova and I. Pandova. "Study on cone roller bearing surface roughness improvement and the effect of surface roughness on tapered roller bearing service life". International Journal of Advanced Manufacturing Technology, vol. 82, no. 5-8, pp. 1099-1106, 2016.
- [10] T. Krenicky. “Multi-parametric monitoring using virtual instruments”. In: 11th International Symposium of Croatian Metallurgical Society SHMD ´2014; Šibenik, Croatia, June 22-26, 2014. Zagreb: Croatian Metallurgical Society, 2014. Metalurgija, vol. 53, no. 3, 2014, p. 426. ISSN 0543-5846.
- [11] J. Macala, I. Pandova, T. Gondova and K. Dubayova. "Reduction of polycyclic aromatic hydrocarbons and nitrogen monooxide in combustion engine exhaust gases by clinoptilolite". Gospodarka Surowcami Mineralnymi, vol. 28, no. 2, pp. 113-123. 2012.
- [12] Z. Murcinkova and T. Krenicky. “Applications utilizing the damping of composite microstructures for mechanisms of production machines and manipulator devices.” In: 13th International Multidisciplinary Scientific Geoconference, SGEM 2013, Albena, Bulgaria. June 16-22, 2013, Geoconference on Nano, Bio and Green – Technologies for a sustainable future. Book Series: International Multidisciplinary Scientific GeoConference-SGEM, pp. 23-30, 2013.
- [13] A. Panda, J. Duplak, and J. Jurko. "Analytical expression of Tvc dependence in standard ISO 3685 for cutting ceramic". Key Engineering Materials, vol. 480-481, pp. 317-322, 2011.
- [14] A. Panda, J. Duplak, J. Jurko and M. Behun. "New Experimental Expression of Durability Dependence for Ceramic Cutting Tool", Applied Mechanics and Materials, vols. 275-277, pp. 2230-2236, 2013.
- [15] A. Panda, J. Duplak, J. Jurko and I. Pandova. "Roller Bearings and Analytical Expression of Selected Cutting Tools Durability in Machining Process of Steel 80MoCrV4016". Applied Mechanics and Materials, vol. 415, pp. 610-613, 2013.
- [16] A. Panda, K. Dyadyura, J. Valicek, M. Harnicarova, J. Zajac, V. Modrak, I. Pandova, P. Vrabel, E. Novakova-Marcincinova and Z. Pavelek. "Manufacturing Technology of Composite Materials-Principles of Modification of Polymer Composite Materials Technology Based on Polytetrafluoroethylene". Materials, vol. 10, no. 4, pp. 337, 2017.
- [17] A. Panda, J. Jurko, M. Dzupon and I. Pandova. "Optimalization of Heat Treatment Bearings Rings With Goal to Eliminate Deformation of Material". Chemické listy, vol. 105, no. 16, pp. 459-461, 2011.
- [18] I. Pandova, T. Gondova and K. Dubayova. "Natural and Modified Clinoptilolite Testing for Reduction of Harmful Substance in Manufacturing Exploitation". Advanced Materials Research, vols. 518-523, pp. 1757-1760, 2012.
- [19] K. Piechocki, M. Kozanecki, S. Kadlubowski, B. Pacholczyk-Sienicka, P. Ulanski and T. Biela. “Controlling the properties of radiation-synthesized thermoresponsive oligoether methacrylate hydrogels by varying the monomer side-chain length; self-composite network containing crystalline phase“. Polymer, vol. 150, pp. 275-288, 2018.
- [20] A. Todic, B. Nedeljkovic, D. Cikara and I. Ristovic. "Particulate basalt-polymer composites characteristics investigation". Mater. Des., vol. 32, no. 3 pp. 1677-1683, 2011.
- [21] J. Valicek, M. Harnicarova, A. Panda, I. Hlavaty, M. Kusnerova, H. Tozan, M. Yagimli and V. Vaclavik. "Mechanism of Creating the Topography of an Abrasive Water Jet Cut Surface". Machining, joining and modifications of advanced materials, vol. 61, pp. 111-120, 2016.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-6f49be9c-d999-4553-ba52-db7ef0509d19