Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Almost all solutions in modern lighting systems are based on LED technology. Luminance and obvious ease of control are the key characteristics of this light source. At the same time, luminances at the level of 108 cd/m2 are a significant advantage of LED in design applications, where high luminous intensity amplification is important. However, in general and in road lighting applications, LED luminaires represent a source of potential discomfort glare. Unfortunately, lighting technology’s metrology lags behind LED parameter development and optimization. The results of luminance measurements of the same luminaires, made with a luminance camera and meters with a measuring field, differ. The differences even appear for the same imaging luminance measuring devices with different lenses. This article presents the results of experiments and detailed analyzes related to modern digital luminance photometry based on the use of digital image sensors. Luminance tests were conducted on multi-source research models of luminaires. Traditional luminance measuring equipment with a measuring field was used in the experiment. The research was also supplemented with the measurements made using CCD/CMOS luminance cameras with selected components where the angular field of view of each pixel was a 0.45 min arc corresponding to the highest average human sight parameters. The results confirm that the average luminance value for multi-source luminaires depends on the measurement system configuration. It has been proposed to standardize the angular field of view parameters of all measurement systems, where the measurement aims to obtain a value that directly relates to human visual impressions (e.g. glare).
Rocznik
Tom
Strony
art. no. e143103
Opis fizyczny
Bibliogr. 51 poz., rys., tab.
Twórcy
autor
- Warsaw University of Technology, Institute of Electrical Power Engineering, Lighting Technology Division, Koszykowa 75, 00-662 Warsaw, Poland
Bibliografia
- [1] T.W. Kruisselbrink, R. Dangol, and E.J. van Loenen, “A comparative study between two algorithms for luminance-based lighting control,” Energy Build., vol. 228, p. 110429, 2020, doi: 10.1016/j.enbuild.2020.110429.
- [2] D. Mazur, H.Wachta, and K. Leśko, “Research of cohesion principle in illuminations of monumental Objects,” in Analysis and Simulation of Electrical and Computer Systems. Lecture Notes in Electrical Engineering, 2018, vol. 452, Springer, Cham. pp. 395–406, doi: 10.1007/978-3-319-63949-9_26.
- [3] P. Pracki and K. Skarżyński, “A Multi-Criteria Assessment Procedure for Outdoor Lighting at the Design Stage,” Sustainability, vol. 12, no. 4, p. 1330, Feb. 2020, doi: 10.3390/su12041330.
- [4] D. Czyżewski, “Research on Luminance Distributions of Chip-On-Board Light-Emitting Diodes,” Crystals, vol. 9, no. 12, p. 645, Dec. 2019, doi: 10.3390/cryst9120645.
- [5] A. Wiśniewski, “Calculations of energy savings using lighting control systems,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 68, no. 4, pp. 809–817, 2020, doi: 10.24425/bpasts.2020.134186.
- [6] P. Pracki, “The impact of room and luminaire characteristics on general lighting in interiors,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 68, no. 3, pp. 447–457, 2020, doi: 10.24425/bpasts.2020.133372.
- [7] D. Czyżewski, “Comparison of luminance distribution on the lighting surface of power LEDs,” Photonics Lett. Pol., vol. 4, pp. 118–120, 2019.
- [8] S. Słomiński, “Advanced modelling and luminance analysis of LED optical systems,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 67, no. 6, pp. 1107–1116, 2019, doi: 10.24425/bpasts.2019.130886.
- [9] S. Słomiński, “Selected problems in modern methods of luminance measurement of multisource led luminaires,” Light Eng., vol. 24, no. 1, 2016.
- [10] S. Słomiński, “Typical Causes of Errors during Measuring Luminance Distributions in Relation to Glare Calculations,” 7th Light. Conf. Visegr. Countries, LUMEN V4 2018 – Proc., 2018, doi: 10.1109/LUMENV.2018.8521136.
- [11] S. Slominski, “Potential resource of mistakes existing while using the modern methods of measurement and calculation in the glare evaluation,” Proc. 2016 IEEE Light. Conf. Visegr. Countries, Lumen V4 2016, 2016, doi: 10.1109/LUMENV.2016.7745538.
- [12] TechnoTeam, “TechnoTeam Bildverarbeitung GmbH,” 2021. https://www.technoteam.de/.
- [13] C.A. Curcio, K.R. Sloan, R.E. Kalina, and A.E. Hendrickson, “Human photoreceptor topography,” J. Comp. Neurol., vol. 292, no. 4, pp. 497–523, 1990, doi: 10.1002/cne.902920402.
- [14] D.R. Williams, “Topography of the foveal cone mosaic in the living human eye,” Vision Res., vol. 28, no. 3, pp. 433–454, Jan. 1988, doi: 10.1016/0042-6989(88)90185-X.
- [15] B.A. Wandell, “The Photoreceptor Mosaic,” Foundations of Vision, Ch. 3, Stanford University, 1995. [Online] https://foundationsofvision.stanford.edu/chapter-3-the-photoreceptor-mosaic (accessed Feb. 27, 2022).
- [16] M.H. Pirenne, “Vision and the eye,” National Library of Australia. [Online] https://catalogue.nla.gov.au/Record/2074379 (accessed Nov. 26, 2020).
- [17] E.A. Rossi and A. Roorda, “The relationship between visual resolution and cone spacing in the human fovea,” Nat. Neurosci., vol. 13, no. 2, pp. 156–157, 2010, doi: 10.1038/nn.2465.
- [18] G.H. Scheir, P. Hanselaer, andW.R. Ryckaert, “Defining the Actual Luminous Surface in the Unified Glare Rating,” LEUKOS – J. Illum. Eng. Soc., vol. 13, no. 4, pp. 201–210, 2017, doi: 10.1080/15502724.2017.1283232.
- [19] R.D. Clear, “Discomfort glare: What do we actually know?,” Light. Res. Technol., vol. 45, no. 2, pp. 141–158, 2013, doi: 10.1177/1477153512444527.
- [20] Y. Tyukhova and C.E. Waters, “Discomfort Glare from Small, High-Luminance Light Sources When Viewed against a Dark Surround,” LEUKOS – J. Illum. Eng. Soc., vol. 14, no. 4, pp. 215–230, 2018, doi: 10.1080/15502724.2018.1434415.
- [21] S. Fotios and M. Kent, “Measuring Discomfort from Glare: Recommendations for Good Practice,” LEUKOS – J. Illum. Eng. Soc., vol. 17, no. 4, pp. 338–358, 2021, doi: 10.1080/15502724.2020.1803082.
- [22] G.H. Scheir, P. Hanselaer, P. Bracke, G. Deconinck, and W.R. Ryckaert, “Calculation of the Unified Glare Rating based on luminance maps for uniform and non-uniform light sources,” Build. Environ., vol. 84, pp. 60–67, 2015, doi: 10.1016/j.buildenv.2014.10.027.
- [23] S. Jain, C. Karmann, and J. Wienold, “Behind electrochromic glazing: Assessing user’s perception of glare from the sun in a controlled environment,” Energy Build., vol. 256, p. 111738, 2022, doi: 10.1016/j.enbuild.2021.111738.
- [24] J.A. Yamin Garretón, E.M. Colombo, and A.E. Pattini, “A global evaluation of discomfort glare metrics in real office spaces with presence of direct sunlight,” Energy Build., vol. 166, pp. 145–153, 2018, doi: 10.1016/j.enbuild.2018.01.024.
- [25] M. Kayaku¸s and I.S. Üncü, “Research Note: The measurement of road lighting with developed artificial intelligence software,” Light. Res. Technol., vol. 51, no. 6, pp. 969–977, 2019, doi: 10.1177/1477153519825564.
- [26] S. Safranek and R.G. Davis, “Sources of Error in HDRI for Luminance Measurement: A Review of the Literature,” LEUKOS – J. Illum. Eng. Soc., vol. 17, no. 2, pp. 187–208, 2021, doi: 10.1080/15502724.2020.1721018.
- [27] S. Słomiński, “Identification of the luminance measurements problems of multisources LED luminaires,” Prz. Elektrotechniczny, vol. 92, no. 7, p. 99590, 2016, doi: 10.15199/48.2016.07.43.
- [28] C. Villa, R. Bremond, and E. Saint-Jacques, “Assessment of pedestrian discomfort glare from urban LED lighting,” Light. Res. Technol., vol. 49, no. 2, pp. 147–172, 2017, doi: 10.1177/1477153516673402.
- [29] Y. Yang, M. Ronnier, S.N. Ma, and X.Y. Liu, “Assessing glare. Part 1: Comparing uniform and non-uniform LED luminaires,” Light. Res. Technol., vol. 49, no. 2, pp. 195–210, 2017, doi: 10.1177/1477153515607396.
- [30] C. Pierson, “Discomfort glare from daylighting : influence of culture on discomfort glare perception,” no. October, 2017, doi: 10.25039/x44.2017.OP12.
- [31] S. Słomiński, “Identifying problems with luminaire luminance measurements for discomfort glare analysis,” Light. Res. Technol., vol. 48, no. 5, pp. 573–588, 2016, doi: 10.1177/1477153515596374.
- [32] Commission Internationale de l’Eclairage. Discomfort Glare in Interior Lighting., “CIE Technical Report 117,” Vienna: CIE, 1995.
- [33] C.-C. Sun, T.-X. Lee, S.-H. Ma, Y.-L. Lee, and S.-M. Huang, “Precise optical modeling for LED lighting verified by cross correlation in the midfield region,” Opt. Lett., vol. 31, no. 14, p. 2193, 2006, doi: 10.1364/ol.31.002193.
- [34] L. Simonot, F. Reux, S. Carré, and C. Martinsons, “The Usefulness of Near-Field Goniophotometry Data to Assess Illuminances and Discomfort Glare in Indoor Lighting,” LEUKOS – J. Illum. Eng. Soc. North Am., vol. 18, no. 2, pp. 246–257, 2021, doi: 10.1080/15502724.2021.1925129.
- [35] C. Porsch, T., Walkling, A., Schmidt, F., Schierz, “Measurement of the Threshold Increment (Ti) in Road Lighting Based on Using Ilmd,” TechnoTeam Bild. GmbH, [Online]. Available: www.technoteam.de.
- [36] “Konica Minolta LS-100/LS-110 catalog.” https://www.konicaminolta.com/instruments/download/instruction_manual/light/pdf/ls-100-110_instruction_eng.pdf (accessed Jan. 23, 2022).
- [37] “Radiant Vision Systems,” 2021. https://www.radiantvisionsystems.com/.
- [38] Comite Europeen de Normalisation, “PN-EN 13201: Road Lighting,” 2016.
- [39] I.C. on I. (CIE), “Test Method for LED Lamps, LED Luminaires and LED Modules,” CIE S 025/E, p. 59, 2015.
- [40] I.C. on I. (CIE), “Discomfort Caused by Glare from Luminaires with a Non-Uniform Source Luminance,” CIE 232, p. 49, 2019, doi: 10.25039/TR.232.2019.
- [41] S. Ma, Y. Yang, M.R. Luo, and X. Liu, “Assessing and Modeling Discomfort Glare for Raw White LEDs with Different Patterns,” LEUKOS – J. Illum. Eng. Soc. North Am., vol. 13, no. 2, pp. 59–70, 2017, doi: 10.1080/15502724.2016.1252683.
- [42] Y. Yang, M.R. Luo, and S.N. Ma, “Assessing glare. Part 2: Modifying Unified Glare Rating for uniform and non-uniform LED luminaires,” Light. Res. Technol., vol. 49, no. 6, pp. 727–742, 2017, doi: 10.1177/1477153516642622.
- [43] Y. Yang, M.R. Luo, and W.J. Huang, “Assessing glare, Part 4: Generic models predicting discomfort glare of light-emitting diodes,” Light. Res. Technol., vol. 50, no. 5, pp. 739–756, 2018, doi: 10.1177/1477153516684375.
- [44] S. Słomiński, “Luminance mapping to the light source model – possibilities to use a MML in the lighting technology field,” Prz. Elektrotechniczny, vol. 87, no. 4, 2011.
- [45] S. Słomiński, “Digital luminance camera measurements of LED and luminaires – State of technology,” Prz. Elektrotechniczny, vol. 91, no. 7, 2015, doi: 10.15199/48.2015.07.24.
- [46] H. Hartridge, “Recent advances in the physiology of vision – part h,” Br. Med. J., vol. 1, no. 4512, pp. 913–916, 1947, doi: 10.1136/bmj.1.4512.913.
- [47] B. O’BRIEN, “Vision and resolution in the central retina,” J. Opt. Soc. Am., vol. 41, no. 12, pp. 882–894, Dec. 1951, doi: 10.1364/ JOSA.41.000882.
- [48] W.M.-C. physiology and evolution of vision in and U. 1979, “Ocular optical filtering,” Springer, Accessed: Feb. 27, 2022. [Online]. Available: https://link.springer.com/chapter/10.1007/978-3-642-66999-6_3.
- [49] D.B. Farber, J.G. Flannery, R.N. Lolley, and D. Bok, “Distribution patterns of photoreceptors, protein, and cyclic nucleotides in the human retina,” Invest. Ophthalmol. Vis. Sci., vol. 26, no. 11, pp. 1558–1568, Nov. 1985.
- [50] C. Yuodelis and A. Hendrickson, “A qualitative and quantitative analysis of the human fovea during development,” Vision Res., vol. 26, no. 6, pp. 847–855, Jan. 1986, doi: 10.1016/0042-6989(86)90143-4.
- [51] P.K. Ahnelt, H. Kolb, and R. Pflug, “Identification of a subtype of cone photoreceptor, likely to be blue sensitive, in the human retina,” J. Comp. Neurol., vol. 255, no. 1, pp. 18–34, 1987, doi: 10.1002/cne.902550103.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-6f42d2d4-dc45-4226-8f06-c3d9a0b8836a