Piezoelectric square based sensor-actuator hybrid in vibration reduction

• Autorzy: Trojanowski Roman , Wiciak Jerzy

Identyfikatory

DOI

10.21008/j.0860-6897.2022.3.03

• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of comparison of vibration reduction levels between standard square based piezo actuators and piezoelectric sensor-actuator hybrids. Modelling was done using FEM method in ANSYS software. Model consisted of a steel plate with piezo elements attached. One of the elements was used as an actuator to excite plate’s vibrations. The other was either a standard homogeneous square based actuator or a sensor actuator hybrid with 2 possible sizes of the sensor part of said hybrid. Harmonic analyses were performed for the 1st, 2nd, 4th and 5th mode shapes with the goal function being the minimalization of displacement vector sum of a number of nodes (there were 3 possible cases). Significant vibration reduction levels were obtained with no significant differences in said levels between standard actuators and sensor-actuator hybrids. Reducing the size of sensor part of sensor-actuator allowed for lower voltages needed to achieve vibration reduction levels.

Słowa kluczowe

EN

AVC; FEM; plate vibration; sensors

PL

AVC; FEM; drgania płyty; czujniki

• Wydawca: Poznan University of Technology. Institute of Applied Mechanics
• Czasopismo: Vibrations in Physical Systems
• Rocznik: 2022
• Tom: Vol. 33, nr 3
• Strony: art. no. 2022303
• Opis fizyczny: Bibliogr. 24 poz., il. kolor., 1 wykr.

Twórcy

autor

Trojanowski Roman

• AGH University of Science and Technology, 30-059 Krakow, al. Mickiewicza 30

• https://orcid.org/0000-0003-3785-2576

autor

Wiciak Jerzy

• AGH University of Science and Technology, 30-059 Krakow, al. Mickiewicza 30

• https://orcid.org/0000-0002-3932-6513

Bibliografia

• 1. C.R. Fuller, S.J. Elliott, P.A. Nelson; Active Control of Vibration; Academic Press: London, 1996.
• 2. C.H. Hansen, S.D. Snyder; Active Control of Noise and Vibration; E&FN Spon: London, 1997.
• 3. U. Ferdek, M. Kozień; Simulation of Application of FGM Piezoelectric Actuators for Active Reduction of Beam Vibrations; Acta Phys. Pol. A 2013, 123(6), 1044-1047. DOI: 10.12693/APhysPolA.123.1044
• 4. M. Wiciak, R. Trojanowski; Numerical Analysis of the Effectiveness of Two-part Piezoactuators in Vibration Reduction of Plates; Acta Phys. Pol. A 2014, 125(4A), A-183-A-189. DOI: 10.12693/APhysPolA.125.A-183
• 5. M. Sullivan, J.E. Hubbard Jr., S.E. Burke; Modeling approach for two‐dimensional distributed transducers of arbitrary spatial distribution; J. Acoust. Soc. Am. 1996, 99, 2965. DOI: 10.1121/1.414861
• 6. P. Gardonio, S.J. Elliott; Smart panels with velocity feedback control systems using triangularly shaped strain actuators; J. Acoust. Soc. Am. 2005, 117, 2046-2064. DOI: 10.1121/1.1863092
• 7. S. El Mostafa, H. Yan-Ru, N. Anh Dung; Modeling of a circular plate with piezoelectric actuators, Mechatronics 2004, 14(9), 1007-1020. DOI: 10.1016/j.mechatronics.2004.04.003
• 8. E. Żołopa, A. Brański; Comparison of Formulas Obtained for Analytical and LQ Idea Approaches to Determine the Optimal Actuator Location in Active Multimodal Beam Vibration Reduction; Arch. Acoust. 2014, 39(4), 599-603. DOI: 10.2478/aoa-2014-0064
• 9. A. Brański; Effectiveness Analysis of the Beam Modes Active Vibration Protection with Different Number of Actuators; Acta Phys. Pol. A 2013, 123(6), 1123-1127. DOI:10.12693/APhysPolA.123.1123
• 10. E. Żołopa, A. Brański; Analytical determination of optimal actuators position for single mode active reduction of fixed-free beam vibration using the linear quadratic problem idea; Acta Phys. Pol. A 2014, 125(4), A-155-A-158. DOI: 10.2478/aoa-2014-0069
• 11. C.K. Susheel, R. Kumar, V.S. Chauhan; Active shape and vibration control of functionally graded thin plate using functionally graded piezoelectric material; J. Intell. Mater. Syst. Struct. 2016, 28(13), 1789-1802. DOI: 10.1177/1045389X16679280
• 12. L. Jinqiang, X. Yu, L. Fengming; Yoshihiro Narita, Active vibration control of functionally graded piezoelectric material plate; Compos. Struct. 2019, 207, 509-518. DOI: 10.1016/j.compstruct.2018.09.053
• 13. W.P. Rdzanek; The acoustic power of a vibrating clamped circular plate revisited in the wide low frequency range using expansion into the radial polynomials; J. Acoust. Soc. Am. 2016, 139(6), 3199-3213. DOI: 10.1121/1.4954265
• 14. W.P. Rdzanek; Sound radiation of a vibrating elastically supported circular plate embedded into a flat screen revisited using the Zernike circle polynomials; Journal of Sound and Vibration 2018, 434, 92-125. DOI: 10.1016/j.jsv.2018.07.035
• 15. K. Szemela, W.P. Rdzanek, W. Żyłka; The radiation efficiency measurements of real system of a thin circular plate embedded into a thick square baffle; Arch. Acoust. 2018, 43(3), 413-423. DOI: 10.24425/123913
• 16. J. Wiciak, R. Trojanowski; Comparison of Vibration and Acoustic Pressure Reduction Using Different Types of Piezo Actuators; Acta Phys. Pol. A 2015, 128(1A), A-62-A-66. DOI: 10.12693/APhysPolA.128.A-62
• 17. A. Tylikowski; The Influence of Electrical and Electromechanical Properties of Functionally Graded Piezoelectric Actuators; Proceedings of the XI Warsztaty Naukowe Polskiego Towarzystwa Symulacji Komputerowej „Symulacja w badaniach i rozwoju”, Warsaw, Poland, 2004, Krzyżyński T., Tylikowski A., 14-21.
• 18. S. Patel, R. Vaish; Design of PZT-Pt functionally graded piezoelectric material for low-frequency actuation applications; J. Intell. Mater. Syst. Struct. 2014; 26(3), 321-327. DOI: 10.1177/1045389X14525491
• 19. R. .Trojanowski, J. Wiciak; The effect of material composition of piezoelectric elements with chosen shapes on plate vibration reduction; Acta Phys. Pol. A 2014, 125(4A), A-179-A-182. DOI: 10.12693/APhysPolA.125.A-179
• 20. R. .Trojanowski, J. Wiciak; Evaluation of the effect of a step change in piezo actuator structure on vibration reduction level in plates; Arch. Acoust., 2015, 1, 71-79. DOI: 10.1515/aoa-2015-0009
• 21. R. Trojanowski, J. Wiciak; Impact of the size of the sensor part on sensor-actuator efficiency; J. Theor. Appl. Mech. 2020, 58(2), 391-401. DOI: 10.15632/jtam-pl/118948
• 22. R.Trojanowski, J. Wiciak; Structural noise reduction and its effects on plate vibrations; Acta Phys. Pol. A 2012, 121(1A), A-148-A-151. DOI: 10.12693/APhysPolA.121.A-148
• 23. R. Trojanowski; Analiza wpływu parametrów geometrycznych i materiałowych elementów piezoelektrycznych na redukcję drgań i dźwięków strukturalnych; PhD Thesis, AGH University of Science and Technology, Krakow, 2021.
• 24. L. Leniowska, M. Sierżęga; The vibration control of a circular plate by the use of a parametric controller with phase shift adjustment; Mechatronics 2019, 58, 39-46. DOI: 10.1016/j.mechatronics.2019.01.003

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).