PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Design of Hybrid Yarn with the Combination of Fiber and Filaments and Its Effect on the Denim Fabric Performance

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Consumer choice and behavior are changing and focusing on comfortable clothing along with fitting. Elastic yarn or fabric is necessary to achieve this comfortableness. By making elastic yarn and using elastic material in fabric production, elastic cloths are produced with proper stretchability and recovery. For that, core-spun yarn was used, but due to a lack of recovery performance, dual core-spun yarn has been developed. Different elastane ratios, linear density, and filaments were used in the dual core-spun yarn according to achieve desired stretchability. In this study, denim fabric performances were evaluated by designing different composite/hybrid dual core-spun yarn with a combination of cotton fiber and filaments. Different elastane linear densities with different filaments, PET/PTT, PTT, and PET, were used, and it was found that using finer elastane in dual core-spun yarn, strength, and unevenness are increased, and elongation decreased. Using PET/PTT filament increases hairiness, and using PTT filament increases elongation. For fabrics, coarser elastane in the dual core-spun yarns has higher stiffness, elasticity, and shrinkage. Fabric with PTT showed higher weight change and stiffness, whereas PET filament-based fabric samples have good strength and low stiffness. In addition, a multiple regression analysis was carried out for yarn and fabric properties, and mathematical models were developed.
Rocznik
Strony
25--37
Opis fizyczny
Bibliogr. 32 poz., rys., tab.
Twórcy
  • Engineering Faculty, Textile Engineering Department, Cukurova University, Adana, Turkey
  • Engineering Faculty, Textile Engineering Department, Cukurova University, Adana, Turkey
  • ÇALIK DENİM Textile AŞ., R&D Department, Yeşilyurt/Malatya, Turkey
Bibliografia
  • 1. Bedez Ute T. Analysis of mechanical and dimensional properties of the denim fabrics produced with double-core and core-spun weft yarns with different weft densities. Journal of the Textile Institute 2019; 110: 179–185.
  • 2. Hua T, Wong NS, Tang WM. Study on properties of elastic core-spun yarns containing a mix of spandex and PET/PTT bi-component filament as core. Textile Research Journal 2018; 88: 1065–1076.
  • 3. Özdil N. Stretch and bagging properties of denim fabrics containing different rates of elastane. Fibres and Textiles in Eastern Europe 2008; 16: 63–67.
  • 4. Baghaei B, Shanbeh M, Ghareaghaji AA. Effect of Tensile Fatigue Cyclic Loads on Bagging. Indian J Fibre Text Res 2010; 35: 298–302.
  • 5. Shishoo LR. A study of the relaxation phenomena in the fabrics containing elastane yarns. International Journal of Clothing Science and Technology 2006; 18: 220–224.
  • 6. Babaarslan O, Shahid A, Dilek S. Evaluation of Denim Fabric Performances from Sustainable Yarn. Materials Science Forum 2022; 1063: 15–23.
  • 7. Babaarslan O, Shahid MA, Okyay N. Investigation of the Performance of Cotton/Polyester Blend in Different Yarn Structures. Autex Research Journal; 0. Epub ahead of print 16 June 2022. DOI: 10.2478/aut-2022-0015.
  • 8. Aydoǧdu SHÇ, Yilmaz D. Analyzing some of the dual-core yarn spinning parameters on yarn and various fabric properties. Tekstil ve Konfeksiyon 2020; 29: 197–207.
  • 9. Türksoy HG, Kılıç G, Üstüntağ S, et al. A comparative study on properties of dualcore yarns. Journal of the Textile Institute 2019; 110: 980–988.
  • 10. Ertekin M, Kirtay E. Tensile properties of some technical core spun yarns developed for protective textiles. Tekstil ve Konfeksiyon 2015; 25: 104–110.
  • 11. Ertaş OG, Zervent Ünal B, Çelik N. Analyzing the effect of the elastanecontaining dual-core weft yarn density on the denim fabric performance properties. Journal of the Textile Institute 2016; 107: 116–126.
  • 12. Zhang H, Xue Y, Wang S. Effect of Filament Over-Feed Ratio on Surface Structure of Rotor-Spun Composite Yarns. Textile Research Journal 2006; 76: 922–927.
  • 13. Sawhney APS, Robert KQ, Ruppenicker GF, et al. Improved Method of Producing a Cotton Covered/Polyester Staple-Core Yarn on a Ring Spinning Frame. Textile Research Journal 1992; 62: 21–25.
  • 14. Akankwasa NT, Wang J, Zhang Y. Study of optimum spinning parameters for production of T-400/cotton core spun yarn by ring spinning. Journal of the Textile Institute 2016; 107: 504–511.
  • 15. Bizjak M, Kadoǧlu H, Kostajnšek K, et al. Properties of elastic fabrics with treated and untreated Co/PBT yarns in weft direction. IOP Conf Ser Mater Sci Eng; 254. Epub ahead of print 2017. DOI:10.1088/1757-899X/254/9/092001.
  • 16. Babaarslan O, Sarıoğlu E, Ertek Avcı M. A comparative study on performance characteristics of multicomponent corespun yarns containing cotton/PET/elastane. The Journal of The Textile Institute 2020; 111: 775–784.
  • 17. Babaarslan O. Stretch and Physical Properties of Weft Stretch Denim Fabrics Containing Elastane and Filament Yarn. Journal of Textile Science & Fashion Technology 2020; 4: 1–10.
  • 18. Babaarslan O, Shahid MA, Doğan FB. Comparative analysis of cotton covered elastomeric hybrid yarns and denim fabric properties. J Eng Fiber Fabr 2021; 16: 155892502110591.
  • 19. Miao M, Barnes S, Vuckovic L. Highspeed video graphic study of filamentcore yarn spinning. Journal of the Textile Institute 2010; 101: 242–252.
  • 20. Downloaded from est.sagepub.com at Tampere Univ. Library on January 14, 2015 1. 2015; 1–15.
  • 21. Babaarslan O. Method of Producing a Polyester/Viscose Core-Spun Yarn Containing Spandex Using a Modified Ring Spinning Frame. Textile Research Journal 2001; 71: 367–371.
  • 22. su CI, Maa MC, Yang HY. Structure and Performance of Elastic Core-Spun Yarn. Textile Research Journal 2004; 74: 611–616.
  • 23. Vuruşkan D, Babaarslan O, Ilhan I. Effect of production parameters on strength and elongation of the selected yarns containing elastane. Tekstil Ve Konfeksiyon 2011; 21: 22–29.
  • 24. Wang Y, Hua T, Zhu B, et al. Novel fabric pressure sensors: Design, fabrication, and characterization. Smart Mater Struct; 20. Epub ahead of print 2011. DOI: 10.1088/0964-1726/20/6/065015.
  • 25. su CI, Yang HY. Structure and Elasticity of Fine Elastomeric Yarns. Textile Research Journal 2004; 74: 1041–1044.
  • 26. El-Tantawy S, Sabry M, Bakry M. The Effect of Different Weft Yarn Production Technique on the Pilling Property of Jeans Fabrics. 2017; 7: 161–169.
  • 27. Pannu S, Ahirwar M, Jamdigni R, et al. EFFECT OF SPANDEX DENIER OF WEFT CORE SPUN YARN ON PROPERTIES OF FINISHED STRETCH WOVEN FABRIC. International Journal of Engineering Technologies and Management Research 2020; 7: 21–32.
  • 28. Babaarslan O, Balcı H, Guler O. Elastan (Spandexİlavesi̇ni̇nPoli̇ester /Vi̇skon Karişimli Dokuma KumaÖzelli̇kleriÜzeri̇ndekiEtki̇si̇ Effect of Elastane on the Properties of Pes / Vis Blend. Tekstil ve Konfeksiyon 2007; 2: 110–114.
  • 29. Sarloǧlu E, Babaarslan O, Avcl ME. Effect of Filament Fineness on Composite Yarn Residual Torque. Autex Research Journal 2018; 18: 7–12.
  • 30. Fricker RD. A Handbook of Statistical Analyses Using Stata. 2001. Epub ahead of print 2001. DOI: 10.1198/tech.2001. s59.
  • 31. Kipfer BA. Mont. 2021. Epub ahead of print 2021. DOI: 10.1007/978-3-030-58292-0_130690.
  • 32. Kaynak HK, Babaarslan O. Effects of filament linear density on the comfort related properties of polyester knitted fabrics. Fibres and Textiles in Eastern Europe 2016; 24: 89–94.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-6e69fbef-a1c6-4140-931f-8f8886321d8e
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.