Analysis of building energy efficiency optimization design effectiveness based on multi-objective optimization algorithm

• Autorzy: Guo Wei , Dong Yaqiong

Identyfikatory

DOI

10.24425/ace.2025.155084

• Języki publikacji: EN

Abstrakty

EN

With the increasing attention of society to sustainable development and environmental friendly design, building energy saving design has become a research hotspot. In this paper, a method combining multi-objective optimization algorithm and neural network backpropagation strategy is proposed to solve the problem that traditional design methods are difficult to balance multi-objective. By dividing the architectural design problem into multiple sub-problems, each sub-problem corresponds to a design objective, and applying multi-objective optimization technology, the global optimization is realized. The experimental results show that the error of energy consumption prediction model is almost 0, while the error of daylighting prediction model is between 0 and 5, and the average error is about 3. The correlation coefficients of all models exceeded 0.9845, highlighting the excellent performance of neural networks in forecasting accuracy. The BP neural network showed good convergence in 2800 to 3000 iterations, further demonstrating the high efficiency of the method in energy consumption and daylighting prediction. The research not only provides a scientific and feasible strategy for building energy efficiency optimization design, but also enhances its scientific value and practicability through the display of quantitative results.

• Wydawca: Komitet Inżynierii Lądowej i Wodnej PAN ; Politechnika Warszawska, Wydział Inżynierii Lądowej
• Czasopismo: Archives of Civil Engineering
• Rocznik: 2025
• Tom: Vol. 71, nr 3
• Strony: 33--48
• Opis fizyczny: Bibliogr. 41 poz., il.

Twórcy

autor

Guo Wei

• Henan University of Urban Construction, School of Management, Pingdingshan, China

• https://orcid.org/0009-0005-6821-6865

autor

Dong Yaqiong

• Henan University of Urban Construction, School of Management, Pingdingshan, China

• https://orcid.org/0009-0001-5498-4661

Bibliografia

• [1] B. Lin, H. Chen, Y. Liu, Q. He, and Z. Li, “A preference-based multi-objective building performance optimisation method for early design stage”, Building Simulation, vol. 14, no. 3, pp. 477-494, 2021, doi: 10.1007/s12273-020-0673-7.
• [2] P.S. Badal and R. Sinha, “Amulti-objective performance-based seismic design framework for building typologies”, Earthquake Engineering & Structural Dynamics, vol. 51, no. 6, pp. 1343-1362, 2022, doi: 10.1002/eqe.3618.
• [3] S. Deng and L. Lv, “Multi-Objective Optimization Technology for Building Energy-Saving Renovation Strategy Based on Genetic Algorithm”, Decision Making: Applications in Management and Engineering, vol. 7, no. 2, pp. 275-293, 2024, doi: 10.31181/dmame7220241073.
• [4] A. Gurhanli, “Accelerating convolutional neural network training using ProMoD backpropagation algorithm”, IET Image Processing, vol. 14, no. 13, pp. 2957-2964, 2020, doi: 10.1049/iet-ipr.2019.0761.
• [5] L.G. Wright, T. Onodera, M.M. Stein, T.Wang, D.T. Schachter, Z. Hu, and P.L. McMahon, “Deep physical neural networks trained with backpropagation”, Nature, vol. 601, no. 7894, pp. 549-555, 2022, doi: 10.1038/s41586-021-04223-6.
• [6] Z. Li, “Parametric optimization scheme of energy dissipation and shock absorption for prefabricated concrete frame”, Archives of Civil Engineering, vol. 70, no. 2, pp. 527-541, 2024, doi: 10.24425/ace.2024.149879.
• [7] S. Firląg, A. Miszczuk, and B. Witkowski, “Analysis of climate change and its potential influence on energy performance of building and indoor temperatures. Part 2: Energy and thermal simulation”, Archives of Civil Engineering, vol. 69, no. 2, pp. 195-209, 2023, doi: 10.24425/ace.2023.145263.
• [8] H. Yue and X. Jia, “Application analysis of green building materials in urban three-dimensional landscape design”, International Journal of Nanotechnology, vol. 19, no. 12, pp. 817-829, 2022, doi: 10.1504/IJNT.2022.129757.
• [9] X. Zhang, Q. Ning, and Z. Chen, “Multi-objective optimization design of energy efficiency for office building window systems based on indoor thermal comfort”, Science and Technology for the Built Environment, vol. 29, no. 6, pp. 618-631, 2023, doi: 10.1080/23744731.2023.2194840.
• [10] Y. Zhou, J. Cai, and Y. Xu, “Indoor environmental quality and energy use evaluation of a three-star green office building in China with field study”, Journal of Building Physics, vol. 45, no. 2, pp. 209-235, 2021, doi: 10.1177/1744259120944604.
• [11] L. Almeida, V.W.Y. Tam, K.N. Le, and Y. She, “Effects of occupant behaviour on energy performance in buildings: a green and non-green building comparison”, Engineering, Construction and Architectural Management, vol. 27, no. 8, pp. 1939-1962, 2020, doi: 10.1108/ECAM-11-2019-0653.
• [12] T. Singh Rajput and A. Thomas, “Optimizing passive design strategies for energy efficient buildings using hybrid artificial neural network (ANN) and multi-objective evolutionary algorithm through a case study approach”, International Journal of Construction Management, vol. 23, no. 13, pp. 2320-2332, 2023, doi: 10.1080/15623599.2022.2056409.
• [13] H. Wang, B. Sheng, Q. Lu, X. Yin, F. Zhao, X. Lu, R. Luo, and G. Fu, “A novel multi-objective optimisation algorithm for the integrated scheduling of flexible job shops considering preventive maintenance activities and transportation processes”, Soft Computing, vol. 25, no. 4, pp. 2863-2889, 2021, doi: 10.1007/s00500-020-05347-z.
• [14] H.P.H. Anh and C.V. Kien, “Optimal energy management of microgrid using advanced multi-objective particle swarm optimisation”, Engineering Computations, vol. 37, no. 6, pp. 2085-2280, 2020, doi: 10.1108/EC-05-2019-0194.
• [15] Z. Chen, Y. Li, K. Huang, and K. Xiao, “Optimal design of a nuclear power plant condenser control system based on multi-objective optimization algorithm”, Nuclear Technology & Radiation Protection, vol. 35, no. 2, pp. 95-102, 2020, doi: 10.2298/NTRP2002095Z.
• [16] Z. Serat, S.A.Z. Fatemi, and S. Shirzad, “Design and Economic Analysis of On-Grid Solar Rooftop PV System Using PVsyst Software”, Archives of Advanced Engineering Science, vol. 1, no. 1, pp. 63-76, 2023, doi: 10.47852/bonviewAAES32021177.
• [17] K. Leung, N. Aréchiga, and M. Pavone, “Backpropagation through signal temporal logic specifications: infusing logical structure into gradient-based methods”, The International Journal of Robotics Research, vol. 42, no. 6, pp. 356-370, 2023, doi: 10.1177/02783649221082115.
• [18] S. Choudhuri, S. Adeniye, and A. Sen, “Distribution alignment using complement entropy objective and adaptive consensus-based label refinement for partial domain adaptation”, Artificial Intelligence and Applications, vol. 1, no. 1, pp. 43-51, 2023, doi: 10.47852/bonviewAIA2202524.
• [19] X.M. Long, Y.J. Chen, and J. Zhou, “Development of AR experiment on electric-thermal effect by open framework with simulation-based asset and user-defined input”, Artificial Intelligence and Applications, vol. 1, no. 1, pp. 52-57, 2023, doi: 10.47852/bonviewAIA2202359.
• [20] I.B. Mansir, E.H.B. Hani, H. Ayed, and C. Diyoke, “Dynamic simulation of hydrogen-based zero energy buildings with hydrogen energy storage for various climate conditions”, International Journal of Hydrogen Energy, vol. 47, no. 62, pp. 26501-26514, 2022, doi: 10.1016/j.ijhydene.2021.12.213.
• [21] Z. Qiao, W. Shan, N. Jiang, et al., “Gaussian bare-bones gradient-based optimization: towards mitigating the performance concerns”, International Journal of Intelligent Systems, vol. 37, no. 6, pp. 3193-3254, 2022, doi: 10.1002/int.22658.
• [22] J. Kim, D. Kwon, S.Y. Woo, W. M. Kang, and J.H. Lee, “Hardware-based spiking neural network architecture using simplified backpropagation algorithm and homeostasis functionality”, Neurocomputing, vol. 428, pp. 153-165, 2021, doi: 10.1016/j.neucom.2020.11.016.
• [23] Q. Xue, Z. Wang, and Q. Chen, “Multi-objective optimization of building design for life cycle cost and CO2 emissions: A case study of a low-energy residential building in a severe cold climate”, Building Simulation, vol. 15, no. 1, pp. 83-98, 2022, doi: 10.1007/s12273-021-0796-5.
• [24] X. Zhou, J. Yu, W. Zhang, A. Zhao, and M. Zhou, “A multi-objective optimization operation strategy for ice-storage air-conditioning system based on improved firefly algorithm”, Building Services Engineering Research and Technology, vol. 43, no. 2, pp. 161-178, 2022, doi: 10.1177/01436244211045570.
• [25] B. Kiss and Z. Szalay, “Sensitivity of buildings’ carbon footprint to electricity decarbonization: a life cycle-based multi-objective optimization approach”, The International Journal of Life Cycle Assessment, vol. 28, no. 7, pp. 933-952, 2023, doi: 10.1007/s11367-022-02043-y.
• [26] M. Baghoolizadeh, A.A. Nadooshan, S.A.H.H. Dehkordi, M. Rostamzadeh-Renani, R. Rostamzadeh-Renani, and M. Afrand, “Multi-objective optimization of annual electricity consumption and annual electricity production of a residential building using photovoltaic shadings”, International Journal of Energy Research, vol. 46, no. 15, pp. 21172-21216, 2022, doi: 10.1002/er.8401.
• [27] S. Gheouany, H. Ouadi, and S. El Bakali, “Hybrid-integer algorithm for a multi-objective optimal home energy management system”, Clean Energy, vol. 7, no. 2, pp. 375-388, 2023, doi: 10.1093/ce/zkac082.
• [28] A. Chatterjee, S. Paul, and B. Ganguly, “Multi-objective energy management of a smart home in real time environment”, IEEE Transactions on Industry Applications, vol. 59, no. 1, pp. 138-147, 2022, doi: 10.1109/TIA.2022.3209170.
• [29] H. Ma, Y. Zhang, S. Sun, T. Liu, and Y. Shan, “A comprehensive survey on NSGA-II for multi-objective optimization and applications”, Artificial Intelligence Review, vol. 56, no. 12, pp. 15217-15270, 2023, doi: 10.1007/s10462-023-10526-z.
• [30] Y. Song, H. Mu, N. Li, and H. Wang, “Multi-objective optimization of large-scale grid-connected photovoltaic-hydrogen-natural gas integrated energy power station based on carbon emission priority”, International Journal of Hydrogen Energy, vol. 48, no. 10, pp. 4087-4103, 2023, doi: 10.1016/j.ijhydene.2022.10.121.
• [31] Z. Yan, X. Zhu, and X. Wang, “A multi-energy load prediction of a building using the multi-layer perceptron neural network method with different optimization algorithms”, Energy Exploration & Exploitation, vol. 41, no. 1, pp. 273-305, 2023, doi: 10.1177/01445987221112250.
• [32] M.S. Younis, Elfargani, “The benefits of artificial intelligence in construction projects”, Acta Informatica Malaysia. vol. 6, no. 2, pp. 47-51, 2022, doi: 10.26480/aim.02.2022.47.51.
• [33] A.A.S. Bahdad, S.F.S. Fadzil, H.O. Onubi, and S.A. BenLasod, “Multi-dimensions optimization for optimum modifications of light-shelves parameters for daylighting and energy efficiency”, International Journal of Environmental Science and Technology, vol. 19, no. 4, pp. 2659-2676, 2022, doi: 10.1007/s13762-021-03328-9.
• [34] A. Agirbas, “Multi-objective building design optimisation using acoustics and daylighting”, Indoor and Built Environment, vol. 31, no. 3, pp. 853-867, 2022, doi: 10.1177/1420326X211040100.
• [35] A. Sohani, F. Delfani, M. Hosseini, H. Sayyaadi, N. Karimi, L.K. Li, and M.H. Doranehgard, “Dynamic multi-objective optimization applied to a solar-geothermal multi-generation system for hydrogen production, desalination, and energy storage”, International Journal of Hydrogen Energy, vol. 47, no. 74, pp. 31730-31741, 2022, doi: 10.1016/j.ijhydene.2022.03.253.
• [36] B.V. Fakhr, M. Mahdavinejad, M. Rahbar, and B. Dabaj, “Design Optimization of the Skylight for Daylighting and Energy Performance Using NSGA-II”, Journal of Daylighting, vol. 10, no. 1, pp. 72-86, 2023, doi: 10.15627/jd.2023.6.
• [37] C. Peng, X. Huang, Y. Wu, and J. Kang, “Constrained multi-objective optimization for UAV-enabled mobile edge computing: Offloading optimization and path planning”, IEEE Wireless Communications Letters, vol. 11, no. 4, pp. 861-865, 2022, doi: 10.1109/LWC.2022.3149007.
• [38] Z. Liu, J.Yan, Q. Cheng, H. Chu, J. Zheng, and C. Zhang, “Adaptive selection multi-objective optimization method for hybrid flow shop green scheduling under finite variable parameter constraints: Case study”, International Journal of Production Research, vol. 60, no. 12, pp. 3844-3862, 2022, doi: 10.1080/00207543.2021.1933239.
• [39] S. Abdali and S. Yaghoubi, “Multi-objective optimization of a combined heat and power (CHP) cycle with a solar collector: energy, exergy and economic point of view”, Hydrogen, Fuel Cell & Energy Storage, vol. 11, no. 2, pp. 95-106, 2024, doi: 10.22104/HFE.2024.6775.1290.
• [40] D. Yousri, O.A. Fathy, A. Babu, T.S. Babu, and D. Allam, “Managing the exchange of energy between microgrid elements based on multi-objective enhanced marine predators algorithm”, Alexandria Engineering Journal, vol. 61, no. 11, pp. 8487-8505, 2022, doi: 10.1016/j.aej.2022.02.008.
• [41] J. Xu, K. Li, and M. Abusara, “Preference based multi-objective reinforcement learning for multi-microgrid system optimization problem in smart grid”, Memetic Computing, vol. 14, no. 2, pp. 225-235, 2022, doi: 10.1007/s12293-022-00357-w.