Surface roughness properties for punch stamps built from unconvenctional materials

• Autorzy: Tomáš M. , Draganovská D. , Ižol P , Hudák J.
• Języki publikacji: EN

Abstrakty

EN

The article presents the study of surface‘s quality of punch stamp built from a Textit J composite, Fibroflex 5 polyurethane and X210Cr12 steel tool. The composite and polyurethane were used for rapid tooling, during which an experimental stamping of the die was verified. During the experiments, various machining strategies have been proposed and optimised using SolidCAM software with consideration of the maximum Scallop Height. Later, the results and conclusions of the unconventional materials‘ machining were applied during machining of the steel punch stamp. The surface‘s quality was reviewed by measuring surface roughness in selected areas of the punch stamp. The roughness parameters of Ra and Rz, the profile curves and the Abbott-Firestone curves were compared.

Słowa kluczowe

EN

punch stamp; roughness; profile trace; Abbott-Firestone curve

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Archives of Mechanical Technology and Automation
• Rocznik: 2014
• Tom: Vol. 34, no. 3
• Strony: 57--66
• Opis fizyczny: Bibliogr. 14 poz., rys., tab

Twórcy

autor

Tomáš M.

• Faculty of Mechanical Engineering, Technical University in Košice, Slovakia

autor

Draganovská D.

• Faculty of Mechanical Engineering, Technical University in Košice, Slovakia

autor

Ižol P

• Faculty of Mechanical Engineering, Technical University in Košice, Slovakia

autor

Hudák J.

• Faculty of Mechanical Engineering, Technical University in Košice, Slovakia

Bibliografia

• [1] Benisa M. et al., Computer-aided modeling of the rubber-pad forming process, Materials and Technology, 2012, vol. 46, no. 5, p. 503-510.
• [2] Charakteristika Textit (Gumoid), http://www.rempo.cz/elanek/33/Charakteristika-TEXTIT-(-Gumoid-).aspx (accessed 22.01.2014).
• [3] Chen Z.C., Song D., A practical approach to generating accurate Iso-Cusped tool paths for three-axis CNC Milling of sculptured surface parts, Journal of Manufacturing Processes, 2006, vol. 8, no. 1,p. 29-38.
• [4] Elastomer - Bars, Sheets, Sections, Hassmersheim: Fibro Gmbh, http://www.fibro.de/ en/standard-parts/pdf-downloads.html?eID=dam_frontend_push&docI D=2163> (accessed 10.01.2014).
• [5] Erkorkmaz K. et al., Feedrate optimization for freeform milling considering constraints from the feed drive system and process mechanics, CIRP Annals - Manufacturing Technology, 2013, vol. 62, p. 395-398.
• [6] Kaymakci M., Lazoglu I., Tool path selection strategies for complex sculptured surface machining, Machining Science and Technology, 2008, vol. 12, s. 119-132.
• [7] Lee H.L. et al., Systematic finishing of dies and moulds, International Journal of Machine Tools & Manufacture, 2006, vol. 46, p. 1027-1034.
• [8] Malak S.F.F., Anderson I.A., Orthogonal cutting of polyurethane foam, International Journal of Mechanical Sciences, 2005, vol. 47, p. 867-883.
• [9] Perez H. et al., Analysis of machining strategies for peripheral milling, Procedia Engineering, 2013, vol 63, p. 573-581.
• [10] Pokorný P., Šimna V., The proposal of a system for determining the characteristics of modeled surfaces, Tehnicki Vjesnik, 2012, vol. 19, nr 1, p. 410-414.
• [11] Senatore J et al., Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones, Computer-Aided Design, 2012, vol. 44, p. 1151-1160.
• [12] Toh C.K., Design, evaluation and optimisation of cutter path strategies when high speed machining hardened mould and die materials, Materials and Design, 2005, vol. 26, p. 517-533.
• [13] Vilcans J. et al., Experimental analysis of the rubber pad forming, Annals & Proceedings of DAAAM International, 2011, vol. 22, no. 1, p. 613-614.
• [14] Wojciechowski S., Twardowski P., Chwalczuk T., Surface roughness of hardened Steel after ball end milling with various surface inclination, Archives of Mechanical Technology and Automation, 2013, vol. 33, no. 1, p. 55-64.