Mechanical and morphological characterization of discarded fishnet/glass fiber reinforced polyester composite

• Autorzy: Monivarman P. , Nagarajan V. A. , Raj F. M.

Identyfikatory

DOI

10.24425/bpasts.2020.134646

• Języki publikacji: EN

Abstrakty

EN

The present work focuses on the fabrication of glass fiber and multifilament discarded fishnet nylon fiber polymer composites with four different fiber compositions. Composites are molded by means of simple hand lay-up methodology with dissimilar layers of the fiber mat. The mechanical characterization (tensile and impact) and thermal analysis of composites have to be investigated. Among the different patterns, hybrid composites reflected better tensile and impact properties as compared to the conventional materials. Morphological characterization was carried out to figure out the de-bonding of fiber/matrix adhesion characteristics of fractured face of tensile testing samples. The result suggests the potential for reuse of discarded fishnet, which constitutes a better alternative for structural work and for possible applications to be used to develop added-value products.

Słowa kluczowe

EN

fibre reinforced polymer; FRP; nylon fibers; hybrid structures; mechanical properties; thermal analysis; electron microscopy

PL

polimer wzmocniony włóknami; FRP; włókna nylonowe; struktury hybrydowe; właściwości mechaniczne; analiza termiczna; mikroskopia elektronowa

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2020
• Tom: Vol. 68, nr 6
• Strony: 1385--1391
• Opis fizyczny: Bibliogr. 26 poz., rys., tab.

Twórcy

autor

Monivarman P.

• Department of Mechanical Engineering, K.N.S.K College of Engineering, Therekalputhoor, Kanyakumari District, Tamil Nadu, India

autor

Nagarajan V. A.

• Department of Mechanical Engineering, University College of Engineering, Nagercoil (Anna University Constituent College Chennai) Tamil Nadu, India

autor

Raj F. M.

• Department of Mechanical Engineering, Stella Mary’s College of Engineering, Aruthenganvilai, Azhikal, 629202, Tamil Nadu, India

Bibliografia

• [1] K. Naresh Kumar, M. Prasanth Kumar, V. Krishna, and D. Srinivasa Rao, “Experimental investigation on mechanical properties of coal ash reinforced glass fiber polymer matrix composites”, International Journal of Emerging Technology and Advanced Engineering 3(8), 250‒258 (2013).
• [2] V.S. Srinivasan, S. Rajendra Boopathy, D.Sangeetha, and B. Vijaya Ramnath, “Evaluation of mechanical and thermal properties of banana-flax based natural fibre composite”, Mater. Des. 60, 620‒627, (2014).
• [3] M. Ramachandran, S. Bansal, and P. Raichurkar, “Scrutiny of jute fiber poly- lactic acid (PLA) resin reinforced polymeric composite”, J. Text. Assoc. 76(6), 372‒375, (2016).
• [4] A. Kumar Chaudhary, P.C. Gope, V.K. Singh, A. Verma, and A. Rajiv Suman, “Thermal analysis of epoxy based coconut fiber-almond shell particle reinforced biocomposites”, Adv. Manuf. Sci. Technol. 38(2), 37‒50 (2014).
• [5] F.E. Gunawan, “Static and dynamic debonding strength of bundled glass fibers”, Arch. Mech. Eng. 65(2), 209‒220 (2018).
• [6] N.N. Meleka, M.A. Safan, A.A. Bashandy, and A.S. Abd-elrazek, “Repairing and Strengthening of Elliptical Paraboloid Reinforced Concrete Shells with Openings”, Arch. Civ. Mech. Eng. 59(3), 401‒420 (2013).
• [7] R. Stencel, W. Pakieła, I. Barszczewska-Rybarek, J. Żmudzki, J. Kasperski, and G. Chladek, “effects of different inorganic fillers on mechanical properties and degree of conversion of dental resin composites”, Arch. Metall. Mater. 63(3), 1361‒1369 (2018).
• [8] I.I.Qamhia, S.S.Shams, and R.F. El-Hajjar, “Quasi-isotropic triaxially braided cellulose-reinforced composites”, Mech Adv Mater Struct. 22, 988–995 (2015).
• [9] P. Chabera, A. Boczkowska, A. Witek, and A. Oziębło, “Fabrication and characterization of composite materials based on porous ceramic preform infiltrated by elastomer”, Bull. Pol. Ac.: Tech. 63(1), 193‒199 (2015).
• [10] S. Ochelski, P. Bogusz, and A. Kiczko, “Heat effects measurements in process of dynamic crash of polymer composites”, Bull. Pol. Ac.: Tech. 60(1), 25‒30 ( 2012).
• [11] S. Shah, A. Patil, M. Ramachandran, and K. Kalita, “Effect of coal ash as a filler on mechanical properties of glass fiber reinforced material”, Int. J. Appl. Mech. Eng. Res. 9(22), 14269‒14277 (2014).
• [12] G. Wróbel, S. Pawlak, and G. Muzia, “Thermal diffusivity measurements of selected fiber reinforced polymer composites using heat pulse method”, Arch. Mater. Sci. Eng. 48(1), 25‒32 (2011).
• [13] R. Bielawski, M. Kowalik, K. Suprynowicz, W. Rządkowski, and P. Pyrzanowski, “Experimental Study on The Riveted Joints In Glass Fibre Reinforced Plastics (GFRP)”, Arch. Mech. Eng. 64, (3), 301‒313 (2017).
• [14] Y. Zhang, Y. Li, H. Ma, and T. Yu, “Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites”, Compos. Sci. Technol. 88, 172–177 (2013).
• [15] J.H.S. Almeida Jr, S.C. Amico, E.C. Botelho, and F.D.R. Amado, “Hybridization effect on the mechanical properties of curaua/glass fiber composites”, Composite Part B 55, 492–497 (2013).
• [16] V. Shaktawat, N. Jain, N.S. Saxena, K.B. Sharma, T.P. Sharma, “Thermo mechanical investigation of thick film of aniline-formaldehyde copolymer and poly (methylmethacrylate)”, Polym. Sci. Ser. B 49, 236–239, (2007)
• [17] J.A. Bencomo-Cisnerosa et al., “Characterization of Kevlar-29 fibers by tensile tests and nanoindentation”, J. Alloy. Compd. 536, 456–459 (2010).
• [18] F. Michael Raj, V.A. Nagarajan, and S.S. Elsi “Mechanical, physical and dynamical properties of glass fiber and waste fishnet hybrid composites”, Polym. Bull. 74, 1441–1460 (2017)
• [19] F. Michael Raj, V.A. Nagarajan, and K.P. Vinod Kumar “Evaluation of mechanical behavior of Multifilament waste fishnet/glass fiber in polyester matrix for the application of Mechanized boat deckhouse in marine composites”, Appl. Mech. Mater. 592(594), 2639–2644 (2014).
• [20] F. Michael Raj, V.A.Nagarajan, and K.P. Vinod Kumar, “Mechanical behavior of FRP composites with used Fish net/glass fiber and polyester matrix”, Int. J. Appl. Eng. Res. 10, 6375–6378 (2015).
• [21] T.P. Sathishkumar, S. Subramaniam, and P. Navaneethakrishnan, “Tensile and flexural properties of snake grass natural fiber reinforced isophthalic polyester composites”, Compos. Sci. Technol. 72(10), 1183–1190 (2012).
• [22] P.V. Joseph, G. Mathew, K. Joseph, G. Groeninckx, and S. Thomas, ”Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites”, Composites Part A 34(3), 275–290 (2003).
• [23] M. Idicula, N.R. Neelakantan, Z. Oommen, K. Joseph, S. Thomas, “A study of the mechanical properties of randomly oriented short banana and sisal hybrid fiber reinforced polyester composites”, J. Appl. Polym. Sci. 96(5), 1699–709 (2005).
• [24] N. Venkateshwaran, A. ElayaPerumal, A. Alavudeen, and M. Thiruchitrambalam, “Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites”, Mater. Des. 32, 4017–4021 (2011).
• [25] M. Ramesh, K. Palanikumar, and K.H. Reddy, “Mechanical property evaluation of sisaljute-glass fiber reinforced polyester composites”, Composites 48, 1‒9, (2013).
• [26] S. Ochi, “Mechanical properties of kenaf fibers and kenaf/PLA composites”, Mech. Mater. 40, 446–452 (2008).

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).