PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Flexural characterization of polymer concrete comprising waste marble and date palm fibers

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Three-point bending. Abstract This work is an experimental approach for the development and characterization of a polymer concrete reinforced with natural fibers. The polymer concrete consists of sand (Quartz) and orthophthalic polyester used as a binder. Marble powder was used to ensure the continuity of the particle size of the granular mixture. As reinforcement, 2% of chopped date palm fibers (short, very short or mixed) were added. For comparison, identical polymer concrete flexure specimens reinforced with the same content of short E-glass fibers were also prepared and tested. All specimens were initially cured at room temperature and then post-cured for 6 h at 70°C. The results of three-point bending on smooth specimens with different rates of charges (marble), showed that the flexural and compressive strength were improved by adding 20% of marble, and were 31.80 MPa and 67.42 MPa respectively. The flexural strength of specimens showed that the improvement or the degradation of polymer concrete properties seemed to be attributed to the nature of fibers (treated or untreated), and/or to the fibers sizing (short, very short or mixed).
Słowa kluczowe
Rocznik
Tom
Strony
169--182
Opis fizyczny
Bibliogr. 26 poz., tab., wykr., zdj.
Twórcy
  • Department of Mechanical Engineering, Faculty of Technology, University of M’sila, 28000, Algeria,
  • Department of Civil Engineering Faculty of Technology University of M’sila, Algeria
autor
  • Sarl Maghreb Pipe Industriel Zone, M’sila, Algeria URMPE/MESOnexTeam Faculty of Engineering University of Boumerdes, Algeria
Bibliografia
  • Achour A., Ghomari F., Belayachi N. 2017. Properties of cementitious mortars reinforced with natural fibers. Journal of Adhesion Science and Technology, 31(17): 1938–1962.
  • Alawar A., Hamed A.M., Al-Kaabi K. 2009. Characterization of treated date palm tree fiber as composite reinforcement. Composites. Part B: Engineering, 40(7): 601–606.
  • Alsaeed T., Yousif B., Ku H. 2013. The potential of using date palm fibres as reinforcement for polymeric composites. Materials & Design, 43: 177–184.
  • Aniskevich K., Hristova J. 2000. Creep of polyester resin filled with minerals. Journal of Applied Polymer Science, 77(1): 45-52.
  • Awal A.A., Mohammadhosseini H. 2016. Green concrete production incorporating waste carpet fiber and palm oil fuel ash. Journal of Cleaner Production, 137: 157-166.
  • Benzerzour M., Sebaibi N., Abriak N.E., Binetruy C. 2012. Waste fibre-cement matrix bond characteristics improved by using silane-treated fibres. Construction and Building Materials, 37: 1-6.
  • Bouguessir H., Harkati E., Rokbi M., Priniotakis G., Vassilliadis S., Boughanem H., Fellah L. 2018. Physico-chemical and mechanical characterization of Jute fabrics for civil engineering applications. Journal of Computational Methods in Sciences and Engineering, 18: 129–147.
  • Chikouche M.D.L., Merrouche A., Azizi A., Rokbi M., Walter S. 2015. Influence of alkali treatment on the mechanical properties of new cane fibre/polyester composites. Journal of Reinforced Plastics and Composites, 34(16): 1329-1339.
  • Choudhary M., Singh T., Dwivedi M., Patnaik A. 2019. Waste marble dust filled glass fiber-reinforced polymer composite. Part I. Physical, thermomechanical, and erosive wear properties. Polymer Composites. In press.
  • Ergün A. 2011. Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete. Construction and Building Materials, 25(2): 806-812.
  • Güneyisi E., Gesoğlu M., Özbay E. 2009. Effects of marble powder and slag on the properties of self compacting mortars. Materials and Structures, 42(6): 813-826.
  • Hristova J., Minster J. 2003. Filler fraction effect on creep response of crosslinked polyester matrix with mineral filler. Journal of Applied Polymer Science, 89(12): 3329-3335.
  • Li Z., Wang L., Wang X. 2006. Flexural characteristics of coir fiber reinforced cementitious composites. Fibers and Polymers, 7(3): 286-294.
  • Magniont C., Escadeillas G., Coutand M., Oms-Multon C. 2012. Use of plant aggregates in building ecomaterials. European Journal of Environmental and Civil Engineering, 16: 17-33.
  • Mohammadhosseini H., Tahir M.M., Sam A.R.M. 2018. The feasibility of improving impact resistance and strength properties of sustainable concrete composites by adding waste metalized plastic fibres. Construction and Building Materials, 169: 223-236.
  • Mohammadhosseini H., Yatim J.M., Sam A.R.M., Awal A.A. 2017. Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash. Journal of Cleaner Production, 144: 448-458.
  • Pereira M.V., Fujiyama R., Darwish F., Alves G.T. 2015. On the strengthening of cement mortar by natural fibers. Materials Research, 18(1): 177-183.
  • Reis J. 2006. Fracture and flexural characterization of natural fiber-reinforced polymer concrete. Construction and Building Materials, 20(9): 673-678.
  • Reis J. 2012. Sisal fiber polymer mortar composites: Introductory fracture mechanics approach. Construction and Building Materials, 37: 177-180.
  • Rilem P. 1995. Technical Comittee TC-113. Method of making polymer concrete and mortar specimens. In Symposium on properties and test methods for concrete-polymer composites, Oostende, p. 129-132.
  • Rokbi M., Imad A., Herbelot C., Belouadah Z. 2018. Fracture Toughness of Random Short Natural Fibers Polyester Composites. Diffusion Foundations, 18: 94-105
  • Rokbi M., Osmani H., Imad A., Benseddiq N. 2011. Effect of chemical treatment on flexure properties of natural fiber-reinforced polyester composite. Procedia Engineering, 10: 2092-2097.
  • Rokbi M, Rahmouni Z., Baali B. 2017. Performance of polymer concrete incorporating waste marble and alfa fibers. Advances in Concrete Construction, 5(4): 331-343.
  • Taha I., Steuernagel L.,Ziegmann G. 2007. Optimization of the alkali treatment process of date palm fibres for polymeric composites. Composite Interfaces, 14(7-9): 669-684.
  • Tahri I., Ziegler-Devin I., Ruelle J., Segovia C., Brosse N. 2016. Extraction and characterization of fibers from palm tree. BioResources, 11(3): 7016-7025.
  • Vytlacilova V. 2011. Effect of recycled aggregate on mechanical–physical properties of fly ash-based composites with fibres. International Journal of Chemical and Environmental Engineering, 59.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-6d46a6f8-f26b-4e8b-9288-7fc80de90f47
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.