Production Scheduling for the One Furnace – Two Casting Lines System

• Autorzy: Basiura R. , Duda J. , Stawowy A.
• Języki publikacji: EN

Abstrakty

EN

The paper presents a scheduling production problem in foundry equipped with one furnace and two casting lines, which provides a number of different types of castings for a large number of clients. The amount of molten metal may not be greater than the capacity of the furnace and its load is a type of metal, from which the products are manufactured on automated casting lines. The purpose of planning is to create the processing order of metal, to prevent delays in the delivery of the ordered products to the customers. This problem is mixt of lot-sizing problem and scheduling problem on two machines (the lines) running in parallel. The article gives a mathematical model, which formally defines the optimization problem, and his relaxed version which is based on the concept of rolling-horizon planning. The proposed approaches were tested on the sample data.

Słowa kluczowe

EN

information technology; foundry industry; production planning; production scheduling

PL

technologia informatyczna; przemysł odlewniczy; planowanie produkcji; harmonogramowanie produkcji

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2015
• Tom: Vol. 15, iss. 2 spec.
• Strony: 3--6
• Opis fizyczny: Bibliogr. 8 poz., tab.

Twórcy

autor

Basiura R.

• AGH University of Science and Technology, Faculty of Management, Gramatyka 10, 30-067 Krakow, Poland

autor

Duda J.

• AGH University of Science and Technology, Faculty of Management, Gramatyka 10, 30-067 Krakow, Poland

autor

Stawowy A.

• AGH University of Science and Technology, Faculty of Management, Gramatyka 10, 30-067 Krakow, Poland

Bibliografia

• [1] de Araujo, S.A., Arenales, M.N. & Clark, A.R. (2008). Lot sizing and furnace scheduling in small foundries. Computers & Operations Research. 35(3), 916-932. DOI: 10.1016/j.cor.2006.05.010.
• [2] Clark, A.R. (2005). Rolling horizon heuristics for production and setup planning with backlogs and error-prone demand forecasts. Production Planning & Control. 16, 81-97.
• [3] Duda, J., Stawowy, A. & Basiura, R. (2014). Mathematical programming for lot sizing and production scheduling in foundries. Archives of Foundry Engineering. 14(3), 17-20. DOI: 10.2478/afe-2014-0053.
• [4] Drexl, A. & Kimms, A. (1997). Lot sizing and scheduling – survey and extensions. European Journal of Operational Research. 99(2), 221-235. DOI: 10.1016/S0377-2217(97)00030-1.
• [5] Fleischmann, B. & Meyr, H. (1997). The general lotsizing and scheduling problem. Operational Research Spectrum. 19(1), 11-21. DOI: 10.1007/BF01539800.
• [6] FrontlineSolvers, http://www.solver.com/premium-solverplatform.
• [7] Lasdon, L.S., Fox, R.L., & Ratner, M.W. (1974). Nonlinear optimization using the generalized reduced gradient method. RAIRO - Operations Research - Recherche Opérationnelle. 8(3), 73-103.
• [8] OpenSolver for Excel, http://opensolver.org.