Investigation of HID-lamp light emission differences for different power supply methods

• Autorzy: Tomczuk K. , Mazurek P. , Hemka L. , Kasprowicz A. , Błażejczyk T.

Identyfikatory

DOI

10.1515/bpasts-2016-0100

• Języki publikacji: EN

Abstrakty

EN

This paper presents investigation of methods for reducing light pulsation and plasma temperature inside a high intensity discharge (HID) lamp arc tube. Differences found in light emission of an arc tube plasma channel under different power supply methods are presented and discussed in this work. The novelty of the paper lies in systematical investigation of different power converter supply methods and demonstrating that it has a significant influence on plasma temperature in an arc tube. The tested lamp was powered by electronic ballasts controlled by different algorithms, which forced their current waveform. To compare the results, the authors performed measurements on a discharge lamp powered by a standard electromagnetic ballast. The investigation of plasma parameters is based on the optical spectroscopy method. It was shown that by using the appropriate current shape of a high switching frequency supply converter, the plasma temperature of an HID lamp can be reduced almost by half.

Słowa kluczowe

EN

plasma temperature; electronic ballast; electromagnetic ballast; lamp current; light flux; light pulsation; high intensity discharge lamp

PL

temperatura plazmy; statecznik elektroniczny; statecznik elektromagnetyczny; prąd lampy; strumień światła; pulsacja światła; wysoka intensywność lampy wyładowczej

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2016
• Tom: Vol. 64, nr 4
• Strony: 915--923
• Opis fizyczny: Bibliogr. 20 poz., rys., tab., wykr.

Twórcy

autor

Tomczuk K.

• Electrotechnical Institute, 28 Mieczysława Pożaryskiego St., 04-703 Warsaw, Poland

autor

Mazurek P.

• Electrotechnical Institute, 28 Mieczysława Pożaryskiego St., 04-703 Warsaw, Poland

autor

Hemka L.

• Electrotechnical Institute, 28 Mieczysława Pożaryskiego St., 04-703 Warsaw, Poland

autor

Kasprowicz A.

• Department of Electrical Engineering, Gdynia Maritime University, 81-87 Morska St., 81-225 Gdynia, Poland

autor

Błażejczyk T.

• Electrotechnical Institute, 28 Mieczysława Pożaryskiego St., 04-703 Warsaw, Poland

Bibliografia

• [1] L. Peretto, L. Rovati, G. Salvatori, R. Tinarelli, and A.E. Emmanuel, “Investigation on the response to light flicker produced by different lamps”, Proc. IEEE Instrumentation and Measurement Technology Conf., 37–42 (2006).
• [2] F.J. Azcondo, A. Ortiz, M. Manana, F.J. Diaz, C. Banas, C. Renedo, S. Perez, F. Delgado, and R. Casanueva, “Effects of flicker on different types of 150 W high-pressure sodium lamps ballasts”, Proc. IEEE Industry Applications Conf., 833–838 (2007).
• [3] L. Pereto, C.E. Riva, L. Rovati, G. Salvatori, and R. Tinarelli, “Analysis of the effects of flicker on the blood flow variation in the human eye”, Proc. IEEE Transactions on Instrumentations and Measurement Conf. 58 (9), 2916–2922 (2009).
• [4] C.N. Moridis, A. Klados, I.A. Kokkinakis, V. Terzis, A.A. Economides, A. Karlovasitou, P.D. Bamidis, and V.E. Karabatakis, “The impact of audiovisual stimulation on alpha brain oscillations: an EEG study”, Proc. IEEE Information Technology and Applications in Biomedicine Conf., 1–4 (2010).
• [5] B. Lehman, A. Wilkins, S. Berman, M. Poplawski, and N. Johnson, “Proposing measures of flicker in the low frequences for lighting applications”, IEEE Energy Conversion Congress and Exposition, 2865–2872, (2011).
• [6] K. Chmielowiec, “Flicker effect of different types of light sources”, Proc. 11th International IEEE Conference on Electrical Power Quality and Utilisation, 1–6 (2011).
• [7] J. Schwieger, M. Wolff, B. Baumann, F. Manders, and J. Sujker, “Characterization of discharge arc flicker in high-intensity discharge lamps”, IEEE Industry Applications 51 (3), 2544–2547 (2014).
• [8] W. Janke, A. Hapka, and M. Oleksy, “DC characteristics of the SiC Schottky diodes”, Bull. Pol. Ac.: Tech. 59 (2), 183–188 (2011).
• [9] S. Karyś, “Advanced control and design methods of the auxiliary resonant commutated pole inverter”, Bull. Pol. Ac.: Tech. 63 (2), 489–494 (2015).
• [10] T.H. Sixt, Waves in Plasmas, Springer-Verlag, New York, 1992.
• [11] R. Dendy, Plasma Physics. An Introductory Course, Press Sindicate of The University of Cambridge, 1993.
• [12] A. Sitenko and V. Malnev, Plasma Physics Theory, p. 432, Springer, 1994.
• [13] A. Marotta, “Determination of axial thermal plasma temperatures without Abel inversion”, Journal of Physics D: Applied Physics 27 (2), 268–272 (1994).
• [14] M. Brambilla, Kinetic Theory of Plasma Waves. Homogeneous Plasma, p. 656, Clarendod Press, Oxford, 1998.
• [15] H. Conrads, M. Schmidt, “Plasma generation and plasma sources”, Plasma Sources Science Technoogy 9 (4), 441–454 (2000).
• [16] T.H. Sixt, The Theory of Plasma Waves, p. 292, Literary Licensing, LLC, 2012.
• [17] A.B. Mikhailovskii, Theory of Plasma Instabilites, p. 314, Springer US, New York, 2013.
• [18] H. Wilhelmsson, Plasma Physics: Nonlinear Theory and Experiments, p. 513, Springer-Verlag, New York, 2013.
• [19] R. Fitzpatrick, Plasma Physics. An Introduction, p. 293, Taylor Francis, United States, 2014.
• [20] B. M. Smirnov, Theory of Gas Discharge Plasma, p. 423, Springer, 2015.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.