Manufacturing, Microstructure and Corrosion Resistance of Electrophoretically Deposited SiO2 and Ni/SiO2 Coatings On X2CrNiMo17–12–2 Steel

• Autorzy: Ratajski T. , Kalemba-Rec I. , Dubiel B.

Identyfikatory

DOI

10.1515/amm-2016-0202

• Języki publikacji: EN

Abstrakty

EN

The SiO₂ and Ni/SiO₂ coatings were electrophoretically deposited on X2CrNiMo17-12-2 steel using ethanol-based suspensions of the SiO₂ and Ni powders. The influence of the zeta potential and concentration of the suspensions, the applied voltage and deposition time on the quality of the coatings was studied. Microstructure of the plan-view and cross sections of the coatings was investigated using scanning electron microscopy. The plan-view images revealed the uniform microstructure of the coatings with sporadically observed cracks, pores as well SiO₂ and Ni agglomerates. On the cross-sections, the Cr₂O₃ layer, resulted from oxidation of the substrate during sintering of the coatings was observed. The polarization tests have shown that SiO₂ and Ni/SiO₂ coatings improve the corrosion resistance of the X2CrNiMo17-12-2 steel in 3.5% NaCl aqueous solution.

Słowa kluczowe

EN

electrophoretic deposition (EPD); SiO2 coatings; nancomposite Ni/SiO2 coatings

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2B
• Strony: 1221--1227
• Opis fizyczny: Bibliogr. 35 poz., rys., wykr.

Twórcy

autor

Ratajski T.

• AGH University of Science And Technology, Faculty of Metals Engineering and Industrial Computer Science, Al. A Mickiewicza 30, 30-059 Krakow, Poland

autor

Kalemba-Rec I.

• AGH University of Science And Technology, Faculty of Metals Engineering and Industrial Computer Science, Al. A Mickiewicza 30, 30-059 Krakow, Poland

autor

Dubiel B.

• AGH University of Science And Technology, Faculty of Metals Engineering and Industrial Computer Science, Al. A Mickiewicza 30, 30-059 Krakow, Poland

Bibliografia

• [1] M. Blicharski, Inżynieria Materiałowa. Stal, Warszawa 2004.
• [2] S. Atashin, M. Pakshir, A. Yazdani, Mater. Design. 32, 1315-1324 (2011).
• [3] L. Adamczyk, A. Piertusiak, H. Bala, Arch. Metall. Mater. 56, 883-889 (2011).
• [4] I. N. Reddy, V. R. Reddy, N. Sridhara, V. S. Rao, M. Bhattacharya, P. Bandyopadhyay,
• [5] S. Basavaraja, A. K. Mukhopadhyay, A. K. Sharma, A. Dey, Ceram. Int. 40, 9571-9582 (2014).
• [6] R. Di Maggio, L. Fedrizzi, S. Rossi, P. Scardi, Thin Solid Films. 286, 127-135 (1996).
• [7] M. Atik, M. A. Aegerter, J. Non-Cryst. Solids. 147-148, 813-819 (1992).
• [8] M. Atik, P. De Lima Neto, L. A. Avaca, M. A. Aegerter, J. Zarzycki, J. Mater. Sci. Lett. 13, 1081-1085 (1994).
• [9] L. Curkovic, H. Otmacic-Curkovic, S. Salopek, M. Majic-Renjo, S. Šegota, Corros. Sci. 77, 176-184 (2013).
• [10] C. R. Tomachuk, C. I. Elsner, A. R. Di Sarli, O. B. Ferraz, Mater. Chem. Phys. 119, 19-29 (2010).
• [11] E. Marin, L. Guzman, A. Lanzutti, W. Ensinger, L. Fedrizzi, Thin Solid Films. 522, 283-288 (2012).
• [12] C. Liu, G. Lin, D. Yang, M. Qi, Surf. Coat. Technol. 200, 142-147 (2006).
• [13] V. H. V. Sarmento, M. G. Schiavetto, P. Hammer, A. V. Benedetti, C. S. Fugivara, P. H. Suegama, S. H. Pulcinelli, C. V. Santilli, Surf. Coat. Technol. 204, 2689-2701 (2010).
• [14] R. Di Maggio, L. Fedrizzi, S. Rossi, P. Scardi, Thin Solid Films. 286, 127-135 (1996).
• [15] C. Wang, F. Jiang, F. Wang, Corros. Sci. 46, 75-84 (2004)
• [16] C. R. Tomachuk, C. I. Elsner, A. R. Di Sarli, O. B. Ferraz, Mater. Chem. Phys. 119, 19-29 (2010).
• [17] D. Pech, P. Steyer, J. P. Millet, Corros. Sci. 50, 1492-1497 (2008).
• [18] J. Kawakita, T. Fukushima, S. Kuroda, T. Kodama, Corros. Sci. 44, 2561-2581 (2002).
• [19] C. X. Li, T. Bell, Corros. Sci. 48, 355-361 (2006).
• [20] B. Díaz, J. Światowska, V. Maurice, A. Seyeux, B. Normand, E. Härkönen, M. Ritala, P. Marcus, Electrochem. Acta. 28, 10516-10523 (2011).
• [21] E. Marin, A. Lanzutti, L. Guzman, L. Fedrizzi, J. Coat. Technol. Res. 5, 655-659 (2011).
• [22] R. Hayashi, M. Yamamoto, K. Tsunetomo, K. Kohno, Y. Osaka, H. Nasu, Jpn. J. Appl. Phys. 129, 756-761 (1990).
• [23] Y. Castro, B. Ferrari, R. Moreno, A. Duran, Surf. Coat. Tech. 191, 228-235 (2005).
• [24] J. Sudagar, J. Lian, W. Sha, J. Alloys Compd. 571, 183-204 (2013).
• [25] B. Bakhit, A. Akbari, F. Nasirpouri, M.G. Hosseini, Appl. Surf. Sci. 307, 351-359 (2014).
• [26] S. Sadreddini, A. Afshar, Appl. Surf. Sci. 303, 125-130 (2014).
• [27] T. R. Tamilarasan, R. Rajendran, G. Rajagopal, J. Sudagar, Surf. Coat. Tech. 276, 320-326 (2015).
• [28] J. A. Calderon, J. E. Henao, M. A. Gomez, Electrochem. Acta. 124, 190-198 (2014).
• [29] E. Bełtowska-Lehman, A. Góral, P. Indyka, Arch. Metall. Mater. 56, 919-931 (2011).
• [30] W. Sassi, L. Dhouibi, P. Bercot, M Rezrazi, Appl. Surf. Sci. 324, 369-379 (2015).
• [31] Y. Wang, Q. Zhou, K. Li, Q. Zhong, Q. B. Bui, Ceram. Int. 41, 79-84 (2015).
• [32] A. Ghalayani Isfahani, M. Ghorbani, J. Nano. Res. 26, 45-51 (2014).
• [33] J. H. Dickerson, Aldo R. Boccaccini, Electrophoretic deposition of nanoparticles, Springer, 2012.
• [34] L. Besra, M. Liu, Prog. Mater. Sci. 52, 1-61 (2007).
• [35] T. Rabizadeh, S. R. Allahkaram, Mater. Design. 32, 133-138 (2011).

Uwagi

EN

The work was supported by the statutory project of AGH-UST no. 11.11.110.293. The authors would like to thank Dr. Marta Gajewska for preparation of the sample by FEB in the Academic Center of Materials and Nanotechnology AGH. The authors kindly acknowledge the company JEOL (EUROPE) SA branch in Poland for allowing access to the JEOL electron microscope JCM-6000 NeoScope IE for this investigation.

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę