Investigation of compositional analysis and physical properties for Ni-Cr-Nb alloys using laser-induced breakdown spectroscopy

• Autorzy: Salloom Hussein , Hamad Tagreed

Identyfikatory

DOI

10.37190/oa210310

• Języki publikacji: EN

Abstrakty

EN

In this work, laser-induced breakdown spectroscopy (LIBS) analysis is optimized for direct estimation of elemental composition, thermal conductivity and hardness for Ni-Cr-Nb alloys. These alloys were chosen with a variable elemental content of niobium and chromium. The influence of laser energy and shot numbers on measuring line intensity was investigated. Based on the ratio between two spectral lines, calibration curves were formed to estimate the element concentration and LIBS results were confirmed with related energy-dispersive X-ray spectroscopy (EDS) data. Hardness and thermal conductivity estimation using LIBS were done by measuring the ratio between two spectral lines, plasma excitation temperature and electron density for different samples. Semi-empirical formulas correlated hardness and thermal conductivity with plasma temperature were established.

Słowa kluczowe

EN

LIBS technique; elemental analysis; nickel alloys; hardness

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Optica Applicata
• Rocznik: 2021
• Tom: Vol. 51, nr 3
• Strony: 429--444
• Opis fizyczny: Bibliogr. 35 poz., rys., tab.

Twórcy

autor

Salloom Hussein

• Al-Nahrain Nanorenewable Energy Center, Al-Nahrain University, Iraq

autor

Hamad Tagreed

• Laser and Optoelectronics Department, College of Engineering, Al-Nahrain University, Iraq

Bibliografia

• [1] GAUDIUSO R., DELL’AGLIO M., DE PASCALE O., SENESI G.S., DE GIACOMO A., Laser induced breakdown spectroscopy for elemental analysis in environmental, cultural heritage and space applications: a review of methods and results, Sensors 10(8), 2010, pp. 7434–7468, DOI: 10.3390/s100807434.
• [2] LUO W.F., ZHAO X.X., ZHU H.Y., XIE D.H., LIU J., JIN P.F., Spectral analysis of Qinling Mountain rock using laser induced breakdown spectroscopy, Journal of Modern Optics 60(21), 2013, pp. 1905–1909, DOI: 10.1080/09500340.2013.865803.
• [3] SENESI G.S., Laser-induced breakdown spectroscopy (LIBS) applied to terrestrial and extraterrestrial analogue geomaterials with emphasis to minerals and rocks, Earth-Science Reviews 139, 2014, pp. 231–267, DOI: 10.1016/j.earscirev.2014.09.008.
• [4] GONDAL M.A., NASR M.M., AHMED Z., YAMANI Z.H., Determination of trace elements in volcanic rock samples collected from cenozoic lava eruption sites using LIBS, Journal of Environmental Science and Health, Part A 44(5), 2009, pp. 528–535, DOI: 10.1080/10934520902720116.
• [5] WANG S., TIAN D., XU M., LIN Q., WANG J., GUO G., YANG G., DUAN Y., Elemental analysis of cemented carbides by calibration-free portable laser-induced breakdown spectroscopy, Instrumentation Science & Technology 46(3), 2018, pp. 277–291, DOI: 10.1080/10739149.2017.1380663.
• [6] BULAJIC D., CRISTOFORETTI G., CORSI M., HIDALGO M., LEGNAIOLI S., PALLESCHI V., SALVETTI A., TOGNONI E., GREEN S., BATES D., STEIGER A., FONSECA J., MARTINS J., MCKAY J., TOZER B., WELLS D., WELLS R., HARITH M.A., Diagnostics of high-temperature steel pipes in industrial environment by laser-induced breakdown spectroscopy technique: the LIBSGRAIN project, Spectrochimica Acta Part B: Atomic Spectroscopy 57(7), 2002, pp. 1181–1192, DOI: 10.1016/S0584-8547(02)00060-5.
• [7] KUZUYA M., A sorting system for aluminum alloy scrap based on laser-induced breakdown spectroscopy, Science Journal of Analytical Chemistry 7(3), 2019, pp. 65–71, DOI: 10.11648/j.sjac.20190703.11.
• [8] VARELA J.A., AMADO J.M., TOBAR M.J., MATEO M.P., YAÑEZ A., NICOLAS G., Characterization of hard coatings produced by laser cladding using laser-induced breakdown spectroscopy technique, Applied Surface Science 336, 2015, pp. 396–400, DOI: 10.1016/j.apsusc.2015.01.037.
• [9] KASHIWAKURA S., WAGATSUMA K., Characteristics of the calibration curves of copper for the rapid sorting of steel scrap by means of laser-induced breakdown spectroscopy under ambient air atmospheres, Analytical Sciences 29(12), 2013, pp. 1159–1164, DOI: 10.2116/analsci.29.1159.
• [10] ARARAT-IBARGUEN C., CORVALÁN C., DI LALLA N., IRIBARREN M., PÉREZ R., VICENTE E., Application of the LIBS technique to the study of fast impurities diffusion in Zr based alloys, Procedia Materials Science 8, 2015, pp. 1004–1013, DOI: 10.1016/j.mspro.2015.04.162. Investigation of compositional analysis and physical properties... 443
• [11] GAUDIUSO R., UHLIR K., GRIESSER M., Micro-invasive depth profile analysis by laser-induced breakdown spectroscopy (LIBS): the case of mercury layers on Sasanian coins, Journal of Analytical Atomic Spectrometry 34(11), 2019, pp. 2261–2272, DOI: 10.1039/C9JA00165D.
• [12] LI J., LU J., DAI Y., DONG M., ZHONG W., YAO S., Correlation between aging grade of T91 steel and spectral characteristics of the laser-induced plasma, Applied Surface Science 346, 2015, pp. 302–310, DOI: 10.1016/j.apsusc.2015.03.186.
• [13] WANG S., WANG Y., LIU C., MAZUMDER J., In-situ monitoring on micro-hardness of laser molten zone on AISI4140 steel by spectral analysis, Scientific Reports 10, 2020, article 4241, DOI: 10.1038/s41598-019-55559-z.
• [14] LEGNAIOLI S., CAMPANELLA B., POGGIALINI F., PAGNOTTA S., HARITH M.A., ABDEL-SALAM Z.A., PALLESCHI V., Industrial applications of laser-induced breakdown spectroscopy: a review, Analytical Methods 12(8), 2020, pp. 1014–1029, DOI: 10.1039/C9AY02728A.
• [15] ABDEL-SALAM Z.A., GALMED A.H., TOGNONI E., HARITH M.A., Estimation of calcified tissues hardness via calcium and magnesium ionic to atomic line intensity ratio in laser induced breakdown spectra, Spectrochimica Acta Part B: Atomic Spectroscopy 62(12), 2007, pp. 1343–1347, DOI: 10.1016/j.sab.2007.10.033.
• [16] SATTAR H., RAN H., DING W., IMRAN M., AMIR M., DING H., An approach of stand-off measuring hardness of tungsten heavy alloys using LIBS, Applied Physics B 126, 2020, article 5, DOI: 10.1007/s00340-019-7355-0.
• [17] LABUTIN T.A., POPOV A.M., LEDNEV V.N., ZOROV N.B., Correlation between properties of a solid sample and laser-induced plasma parameters, Spectrochimica Acta Part B: Atomic Spectroscopy 64(10), 2009, pp. 938–949, DOI: 10.1016/j.sab.2009.07.033.
• [18] PALANCO S., CABALIN L.M., ROMERO D., LASERNA J.J., Infrared laser ablation and atomic emission spectrometry of stainless steel at high temperatures, Journal of Analytical Atomic Spectrometry 14(12), 1999, pp. 1883–1887, DOI: 10.1039/A905472C.
• [19] DARBANI S.M.R., GHEZELBASH M., MAJD A.E., SOLTANOLKOTABI M., SAGHAFIFAR H., Temperature effect on the optical emission intensity in laser induced breakdown spectroscopy of super alloys, Journal of the European Optical Society – Rapid Publications 9, 2014, article 14058, DOI: 10.2971/jeos.2014.14058.
• [20] HAMAD T.K., JASIM A.S., SALLOOM H.T., Characterizing laser-induced plasma generated from MgO/PVA solid targets, Optics and Spectroscopy 127(1), 2019, pp. 153–158, DOI: 10.1134/S0030400X19070099.
• [21] FIKRY M., TAWFIK W., OMAR M.M., Investigation on the effects of laser parameters on the plasma profile of copper using picosecond laser induced plasma spectroscopy, Optical and Quantum Electronics 52(5), 2020, article 249, DOI: 10.1007/s11082-020-02381-x.
• [22] AKRAM M., BASHIR S., HAYAT A., MAHMOOD K., AHMAD R., KHALEEQ-U-RAHAMAN M., Effect of laser irradiance on the surface morphology and laser induced plasma parameters of zinc, Laser and Particle Beams 32(1), 2014, pp. 119–128, DOI: 10.1017/S026303461300102X.
• [23] NIST Atomic Spectra Database Lines Form, https://physics.nist.gov/PhysRefData/ASD/lines_form.html (accessed June 2020).
• [24] LABUTIN T.A., POPOV A.M., SYCHEV D.N., ZOROV N.B., Correlation between mechanical properties of aluminum alloys and characteristics of laser-induced plasma, Proceedings of SPIE 7022, 2008, article 70221C, DOI: 10.1117/12.804115.
• [25] CABALIN L.M., LASERNA J.J., Experimental determination of laser induced breakdown thresholds of metals under nanosecond Q-switched laser operation, Spectrochimica Acta Part B: Atomic Spectroscopy 53(5), 1998, pp. 723–730, DOI: 10.1016/S0584-8547(98)00107-4.
• [26] ZHANG D.C., HU Z.Q., SU Y.B., HAI B., ZHU X.L., ZHU J.F., MA X., Simple method for liquid analysis by laser-induced breakdown spectroscopy (LIBS), Optics Express 26(14), 2018, pp. 18794–18802, DOI: 10.1364/OE.26.018794.
• [27] GONDAL M.A., SHEMIS M.A., KHALIL A.A.I., NASR M.M., GONDAL B., Laser produced plasma diagnosis of carcinogenic heavy metals in gallstones, Journal of Analytical Atomic Spectrometry 31(2), 2016, pp. 506–514, DOI: 10.1039/C5JA00358J.
• [28] KASHIWAKURA S., WAGATSUMA K., Rapid sorting of stainless steels by open-air laser-induced breakdown spectroscopy with detecting chromium, nickel, and molybdenum, ISIJ International 55(11), 2015, pp. 2391–2396, DOI: 10.2355/isijinternational.ISIJINT-2015-316.
• [29] WANG X., ZHANG L., FAN J., LI Y., GONG Y., DONG L., MA W., YIN W., JIA S., Parameters optimization of laser-induced breakdown spectroscopy experimental setup for the case with beam expander, Plasma Science and Technology 17(11), 2015, pp. 914–918, DOI: 10.1088/1009-0630/17/11/04.
• [30] ABDEL-SALAM Z., ABDELHAMID M., KHALIL S.M., HARITH M.A., LIBS new application: determination of metallic alloys surface hardness, AIP Conference Proceedings 1172(1), 2009, pp. 49–52, DOI: 10.1063/1.3250114.
• [31] MOMCILOVIC M., PETROVIC J., CIGANOVIC J., CVIJOVIC-ALAGIC I., KOLDZIC F., ZIVKOVIC S., Laser‑induced plasma as a method for the metallic materials hardness estimation: an alternative approach, Plasma Chemistry and Plasma Processing 40, 2020, pp. 499–510, DOI: 10.1007/s11090-020-10063-5.
• [32] KHALIL O.M., MINGAREEV I., BONHOFF T., EL-SHERIF A.F., RICHARDSON M.C., HARITH M.A., Studying the effect of zeolite inclusion in aluminum alloy on measurement of its surface hardness using laser-induced breakdown spectroscopy technique, Optical Engineering 53(1), 2014, article 014106, DOI: 10.1117/1.OE.53.1.014106.
• [33] DJENIZE S., SKULJAN L., LABAT J., BUKVIC S., KONJEVIC R., Measured Stark widths and shiifts of several NiI and NiII spectral lines, Astronomy and Astrophysics, Supplement Series 105, 1994, pp. 115–118.
• [34] GUO K., CHEN A., XU W., ZHANG D., JIN M., Effect of sample temperature on time-resolved laser-induced breakdown spectroscopy, AIP Advances 9(6), 2019, article 065214, DOI: 10.1063/1.5097301.
• [35] COWPE J.S., MOOREHEAD R.D., MOSER D., ASTIN J.S., KARTHIKEYAN S., KILCOYNE S.H., CROFTS G., PILKINGTON R.D., Hardness determination of bio-ceramics using laser-induced breakdown spectroscopy, Spectrochimica Acta Part B: Atomic Spectroscopy 66(3–4), 2011, pp. 290–294, DOI: 10.1016/j.sab.2011.03.007.