The Development and Modeling of an Innovative Process of Forming the Internal Toothing of Flange Coupling Spline Sleeves

• Autorzy: Michalczyk J. , Wiewiórowska S. , Muskalski Z.

Identyfikatory

DOI

10.24425/amm.2018.125133

• Języki publikacji: EN

Abstrakty

EN

The article proposes the implementation of a novel method of plastic forming of internal toothing in flange spline sleeves. A method being the subject of Polish patent application P.416772 has been used for this purpose, which involves a combination of the scheme of the direct extrusion of a cone hollow with the die press forming of the wall to obtain a flange. The entire process takes place in a single technological sequence. The operations come one after another, so that there is no need for reheating the stock or carrying out intermediate soft annealing. The proposed method is assumed to be an alternative to the operation of press forming of internal spline sleeve toothing in a conical die [1] and to the operation of swaging on rotary swaging machines [2]. It is assumed that this method, too, is alternative to other technologies known from the literature and industrial practice, whose specifications and literature references will be indicated later on in this paper. Computer simulations of the flanged sleeve plastic forming process were performed using the commercial numerical program Forge^®3D. During the numerical computations, the distributions of temperature fields were determined on the cross-section of the plastically formed product. The computations enabled also the visualization of the plastic flow of metal, especially in the toothing forming regions, and the determination of the energy and force parameters of the process.

Słowa kluczowe

EN

forging gears; FEM analysis; heat extrusion

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 4
• Strony: 1981--1986
• Opis fizyczny: Bibliogr. 15 poz., rys., wykr., wzory

Twórcy

autor

Michalczyk J.

• Czestochowa University of Technology, Institute of Metal Forming and Safety Engineering, 19 A. Krajowej Str., 42-200 Częstochowa, Poland

autor

Wiewiórowska S.

• Czestochowa University of Technology, Institute of Metal Forming and Safety Engineering, 19 A. Krajowej Str., 42-200 Częstochowa, Poland

autor

Muskalski Z.

• Czestochowa University of Technology, Institute of Metal Forming and Safety Engineering, 19 A. Krajowej Str., 42-200 Częstochowa, Poland

Bibliografia

• [1] A. Turno, R. Romanowski, M. Olszewski, Obróbka Plastyczna kół zębatych, Warszawa 1973
• [2] J. Sińczak. Kucie dokładne, Kraków 2011.
• [3] W. Libura, Płynięcie metalu w procesie wyciskania, Kraków 2011.
• [4] V. V. Dewiatov, H. S. Dyja, V. Y. Stolbow, Modeling mathematical and optimization processes extrusions, Częstochowa 2004.
• [5] Z. Pater, A. Gontarz, J. Tomczak, T. Bulzak: Arch. Civ. Mech. Eng. 15, 4, (2015).
• [6] G. Winiarski, A. Gontarz, A. Dziubińska, Arch. Civ. Mech. Eng. 17, 4, (2012).
• [7] J. Bartnick, Arch. Metall. Mater. 57, 4 (2012).
• [8] G. Winiarski, A. Gontarz, Sposób i urządzenie do wyciskania wewnętrznego kołnierzy. Polish Patent PL 222169.
• [9] G. Winiarski, A. Gontarz, Sposób i urządzenie do wywijania kołnierza rolkami prowadzącymi. Polish Patent PL 219935.
• [10] Z. Pater, J. Tomczak, A. Gontarz, Sposób wytwarzania kołnierzy czołowych w kształcie rozety trójramiennej. Polish Patent PL 220525.
• [11] M. Pietrzyk, The numerical methods in plastic working metals. Kraków 1992.
• [12] J. Michalczyk, Sposób wytwarzania tulei przelotowej. Polish Patent 221425.
• [13] N. J. Hoff, Quart., Appl. Mech. 2, 49 (1954).
• [14] F. H. Norton, Creep of Steel at High Temperature. McGraw Hill, New York 1929.
• [15] H. Dyja, P. Szota, S. Mroz, J. Mater. Process. Tech. 153, 115-121 (2004).