Comparative Studies of Continuously Cast Semi-finished Al Grade EN AW 1370

• Autorzy: Knych T. , Uliasz P. , Piwowarska-Uliasz M.
• Języki publikacji: EN

Abstrakty

EN

The current development of processing technologies of aluminium and its alloys is oriented towards special technologies of continuous casting, dedicated to specific applications. The good point of such approach constitutes limiting of production costs and time needed for making these products. An example of utilising dedicated technologies is sheets production technology of aluminium and its alloys by continuous casting. Another example constitutes technologies of producing charges for the drawing process, where technologies of rods continuous castings of copper and its alloys are known an industrial scale. However, there is a lack of such solutions regarding continuous casting of aluminium and aluminium alloys. Comparative studies of aluminium materials obtained in continuous casting and in continuous casting and rolling technology are presented in the paper.

Słowa kluczowe

EN

continuous casting; aluminium cast; wire rod; wire drawing

PL

odlewanie ciągłe; odlew aluminiowy; walcówka; ciągnienie drutu

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2013
• Tom: Vol. 13, iss. 2 spec.
• Strony: 65--69
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Knych T.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Krakow, Poland

autor

Uliasz P.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Krakow, Poland

autor

Piwowarska-Uliasz M.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, al. A. Mickiewicza 30, 30-059 Krakow, Poland

Bibliografia

• [1] Fredriksson, H., Åkerlind, U. (2006). Material properties during casting. John Wiley & Sons, Ltd, England.
• [2] Wilson, R., (2000). A practical approach to continuous casting of copper-based alloys and precious metals. London: IOM Communications Ltd.
• [3] Pops, H. (1995). Nonferrous wire handbook Volume 3: Principles and Practice. USA: The Wire Association International, Inc.
• [4] Knych, T., Mamala, A., Smyrak, B. & Uliasz, P. (2009). Feedstock production technologies to the process of drawing wire for electrical purposes. Rudy i Metale Nieżelazne. 9.
• [5] Merchant, H. D., Tyler, D. E., Chia, E. H. (1989). Continuous Casting of Non-Ferrous Metals and Alloys. TMS.
• [6] Kammer, C. Continuous casting of aluminium. Supplement 3, TALAT Lecture 3210.
• [7] Dunleavy, J. G., Tassi, O. J. (1981). Nonferrous Wire Handbook. Vol. 2, Bare Wire Processing, WAI.
• [8] Knych, T., Kwaśniewski, P., Kiesiewicz, G., Piwowarska, M. & Uliasz, P. (2010). Study about drawing aluminium rod made by continuous casting. Rudy i Metale Nieżelazne. 55(7), 464-469.
• [9] Knych, T., Uliasz, P., Piwowarska, M. (2010). Research on technology for continuous casting rods with aluminium for direct drawing. Conference of Young Scientists ProFuturo, Kraków (pp. 31-41). Materials of Krakow.
• [10] Knych, T., Uliasz, P. & Piwowarska, M. Research on new technology for production of feedstock for the production of aluminum wires. Wiadomości Hutnicze Hutnik.
• [11] Patent No. P-393 457, Method of continuous casting of metals and equipment for horizontal continuous casting of metals.