Hydraulic systems safety by reducing operation and maintenance mistakes

• Autorzy: Sobczyk Andrzej , Pobędza Janusz

Identyfikatory

DOI

10.2478/czoto-2019-0089

• Konferencja: 7th International Conference System Safety: Human - Technical Facility - Environment, CzOTO 2018 (7 ; 12-14.12.2018 ; Zakopane, Poland)
• Języki publikacji: EN

Abstrakty

EN

The subject of the article is concern towards hydraulic systems safety improvement by elimination or/and reduction the possible mistakes which could be the reason of operator accidents and damage of the machine and surroundings. The most typical situation which could be present during hydraulic system operation and maintenance have been analysed and classified to help understand its correlation with safety. Finally each of specified danger situation during system operation and/or maintenance contents rules and warning advice to avoid safety risk.

Słowa kluczowe

EN

hydraulic systems; safety; maintenance

PL

układy hydrauliczne; bezpieczeństwo; konserwacja

• Wydawca: De Gruyter
• Czasopismo: System Safety : Human - Technical Facility - Environment
• Rocznik: 2019
• Tom: Vol. 1, nr 1
• Strony: 700--707
• Opis fizyczny: Bibliogr. 24 poz., rys., tab.

Twórcy

autor

Sobczyk Andrzej

• Cracow University of Technology, Faculty of Mechanical Engineering Poland

autor

Pobędza Janusz

• Cracow University of Technology, Faculty of Mechanical Engineering Poland

Bibliografia

• [1] Domagala, M., Momein, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018a, Simulation of Cavitation Erosion in a Hydraulic Valve. Mater. Res. Proc. 5, 1-6.
• [2] Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018b, Simulation of Particle Erosion in a Hydraulic Valve. Mater. Res. Proc. 5, 17-24.
• [3] Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017. The Laser Textured Surfaces of the Silicon Carbide Analyzed with the Bootstrapped Tribology Model. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1252- 1257.
• [4] Fabis-Domagala, J., Filo, G., Momeni, H., Domagala, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183 (2018) 03008.
• [5] HydraulicSupermarket.com, How a little mistake cost a hydraulic equipment owner $86,165 a year!. https://www.hydraulicsupermarket.com/the-right-oil.html [date: 08.11.2018]
• [6] ID System, Understanding hydraulic risks and preventing accidents. https://www.idsystem-didactic.com/en/hydraulic-safety/ [date: 08.11.2018]
• [7] Korzekwa, J., Bara, M., Pietraszek, J., Pawlus, P., 2016. Tribological behaviour of Al2O3/inorganic fullerene-like WS2 composite layer sliding against plastic. Int. J. Surf. Sci. Eng., 10, 570-584.
• [8] Kozien, M.S., 2009. Acoustic intensity vector generated by vibrating set of small areas with random amplitudes. J. Theor. App. Mech.-Pol. 47, 411-420.
• [9] Kuscer, D., Korzekwa, J., Kosec, M., Skulski, R., 2007. A- and B-compensated PLZT x/90/10: Sintering and microstructural analysis. J. Eur. Ceram. Soc. 27, 4499-4507.
• [10] Lisowski, E., Filo, G., 2017. Analysis of a proportional control valve flow coefficient with the usage of a CFD method. Flow Meas Instrum 53, 269-278.
• [11] Maszke, A., Dwornicka, R., Ulewicz, R., 2018. Problems in the implementation of the lean concept at a steel works – Case study. MATEC Web Conf., 183, art. 01014.
• [12] Pacana, A., Ulewicz, R., 2017. Research of Determinants Motiving to Implement the Environmental Management System. Pol. J. Manag. Stud. 16, 165-174.
• [13] Phadke, M.S., 1989. Quality Engineering using Robust Design. Prentice Hall, Englewood Cliffs, USA.
• [14] Pietraszek, J., Szczotok, A., Kolomycki, M., Radek, N., Kozien, E., 2017. Nonparametric assessment of the uncertainty in the analysis of the airfoil blade traces. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1412-1418.
• [15] Singh, B. et al., 2016. Study of doubly strange systems using stored antiprotons. Nucl. Phys. A 954, 323-340.
• [16] Singh, B. et al., 2017. Feasibility study for the measurement of pi N transition distribution amplitudes at (P)over-barANDA in (P)over-barp -> J/psi pi(0). Phys. Rev. D. 95, 3, 25 p., 032003.
• [17] Skrzypczak, L., Skrzypczak-Pietraszek, E., Lamerzarawska, E., Hojden, B., 1994. Micropropagation of Oenothera-Biennis L and an Assay of Fatty-Acids. Acta Soc. Bot. Pol. 63, 173-177.
• [18] Skrzypczak-Pietraszek, E., Pietraszek, J., 2009. Phenolic acids in in vitro cultures of Exacum affine Balf. f. Acta Biol. Cracov. Bot., 51, 62-62.
• [19] Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018a. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy. Eng. Life Sci., 18, 287-297.
• [20] Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018b. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 13, e0202556.
• [21] Sobczyk, A., 2011. Improvement of Hydraulic System Efficiency by Means of Energy Recuperation. Wyd. Politechniki Krakowskiej, Kraków, Poland.
• [22] Styrylska, T., Pietraszek, J., 1992. Numerical Modeling of Non-Steady-State Temperature-Fields with Supplementary Data. Z. Angew. Math. Mech. 72, T537- T539.
• [23] Ulewicz, R., 2016. Quality Management System operation in the woodworking industry. Int. Conf. Path Forward for wood products: a global perspective. Proc. of Sci. Papers, Zagreb, WOODEMA 51-56.
• [24] Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast Iron foundry. Metal 2013: 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).