Influence of the thickness of joined elements on lap length of aluminium alloy sheet bonded joints

• Autorzy: Rudawska A.

Identyfikatory

DOI

10.12913/22998624/59082

• Języki publikacji: EN

Abstrakty

EN

This work features the results of experimental research in determining the limiting length of the bonded single-lap joint of materials of the same thickness, different thicknesses and of hybrid systems of different aluminium alloy sheets. The length of the bonded lap joint is just one of the structural features, critical to the strength of bonded joints, this length depending on the thickness and type of the bonded elements. In the case of single-lap bonded joints there is a limiting lap length exceeding of which should not increase the strength of such joints. This is why the length of a bonded lap joint is critical in terms of strength and application concerns. The length of the lap is not always reflected in practice due to simplification of the analytical relations. What is required is experimental verification of the derived theoretical relations. The tested materials are aluminium alloy sheets, widely used in the machinery, aviation and construction industries.

Słowa kluczowe

EN

aluminium and alloys; single lap bonded joints; strength

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2015
• Tom: Vol. 9, nr 27
• Strony: 35--44
• Opis fizyczny: Bibliogr. 23 poz., fig., tab.

Twórcy

autor

Rudawska A.

• Department of Production Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland

Bibliografia

• 1. Adams R.D., Comyn J., Wake W.C.: Structural Adhesive Joints in Engineering Book, 2nd edition, Springer 1997.
• 2. Ebnesajjad S.: Adhesives Technology Handbook, 2nd edition, William Andrew Publishing USA, 2008.
• 3. Habenicht G.: Applied Adhesive Bonding. A Practical Guide for Flawless Results, WILEY-VCH Verlag GmbH&Co. KGaA, Weinheim 2009.
• 4. Megson T.H.G. Aircraft Structures for Engineering Students, 4th edition. Elsevier Science Publishers 2007.
• 5. Grant L.D.R., Adams R.D., da Silva L.F.M.: Experimental and numerical analysis of T-peel joint for the automotive industry. Journal of Adhesion Science and Technology, 23, 2009, 23, 317–338.
• 6. You M., Yan Z.-M., Zheng X.-L., Yu H.-Z., Li Z.: A numerical and experimental study of gap length on adhesively bonded aluminum double-lap joint. International Journal of Adhesion and Adhesives, 27, 2007, 696–702.
• 7. Critchlow G.W., Yendall K.A., Bahrani D., Quinn A., Andrews F.: Strategies for the replacement of chromic acid anodizing for the structural bonding of aluminium alloys. International Journal of Adhesion and Adhesives, 26, 2006, 419–453.
• 8. Arenas J.M., Narbón J.J., Alía C.: Optimum adhesive thickness in the structural adhesives joint using statistical techniques based on Weibull distribution. International Journal of Adhesion and Adhesives, 30, 2010, 160–165.
• 9. Godzimirski J.: Wpływ czynników konstrukcyjnych i technologicznych na wytrzymałość połączeń klejowych. Przegląd Mechaniczny, 13, 2003, 18–22.
• 10. Godzimirski J.: Czynniki kształtujące wytrzymałość połączeń klejowych. Technologia i Automatyzacja Montażu, 4, 1994, 61–64.
• 11. Godzimirski J., Kozakiewicz J., Łunarski J., Zielecki W.: Konstrukcyjne połączenia klejowe elementów metalowych w budowie maszyn. Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów 1997.
• 12. Taib A.A., Boukhili R., Achiou S., Gordon S., Boukehili H.: Bonded joints with composite adherends. Part I. Effect of specimen configuration, adhesive thickness, spew fillet and adherend stiffness on fracture. International Journal of Adhesion and Adhesives, 26, 2006, 226–236.
• 13. Zhao X., Adams R.D., da Silva L.F.M.: A new method for determination of bending moments in single lap joints. International Journal of Adhesion and Adhesives, 30, 2010, 63–71.
• 14. Grant L.D.R., Adams R.D., da Silva L.F.M.: Effect of the temperature on the strength of adhesively bonded single lap and T joints for the automotive industry. International Journal of Adhesion and Adhesives, 2009, 29, 535–524.
• 15. Rudawska A.: Wybrane zagadnienia konstytuowania połączeń adhezyjnych jednorodnych i hybrydowych. Monografia. Wydawnictwo Politechniki Lubelskiej, Lublin, 2013.
• 16. Kuczmaszewski J.: Fundamentals of metal-metal adhesive joint design. Printed by Lublin University of Technology, Polish Academy of Sciences, Lublin Branch Lublin, 2006.
• 17. http://www.aerospacemetals.com/aluminum-distributor.html (June 2011)
• 18. http://en.investa.pl (December 2014)
• 19. http://www.kbhakord.pl (December 2014)
• 20. http://www.loctite.co.uk (December 2014)
• 21. http://tds.loctite.com (December 2014)
• 22. Praca zbiorowa pod red. pod red. P. Konieczki i J. Namieśnika: Ocena i kontrola jakości wyników pomiarów analitycznych. WNT, Warszawa 2007.
• 23. http://pl.wikisource.org (February, 2015)