Polypropylene-Matrix Polymer Composites with Natural Filler

• Autorzy: Włodarczyk-Fligier Anna , Polok-Rubiniec M. , Chmielnicki B.

Identyfikatory

DOI

10.24425/amm.2021.134789

• Języki publikacji: EN

Abstrakty

EN

Polymer composite materials based on the Moplen HP400R polypropylene matrix with a filler from walnut shell flour with 30, 40 and 50% content and 200-315 μm and 315-443 μm fraction were produced by the injection method. The effect of filler content was analysed on the processing properties of the composites such as: MFR Melt Flow Rate and the MVR Melt Volume-flow Rate, as well as the temperature of the filler flour decomposition using the TGA thermogravimetric analysis method. The following was also determined: density, hardness, tensile strength and stiffness modulus of elasticity of the materials in question. The obtained composite material was characterised by low density, which increased with the rising filler content. It was found that the applied natural filler has increased the hardness and stiffness modulus of the composite and decreased the tensile strength.

Słowa kluczowe

EN

WPC composites; processing of composites; natural filler; properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2021
• Tom: Vol. 66, iss. 1
• Strony: 313--319
• Opis fizyczny: Bibliogr. 22 poz., fot., rys., tab.

Twórcy

autor

Włodarczyk-Fligier Anna

• Silesian University of Technology, Department of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Polok-Rubiniec M.

• Silesian University of Technology, Department of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Chmielnicki B.

• Łukasiewicz Research Network Institute for Engineering of Polymer Materials and Dyes, 55 Marii Skłodowskiej-Curie Str., 87-100 Toruń, Poland

Bibliografia

• [1] B. English, R. Falk, Forest Products Society 7293, 189-194 (1996).
• [2] A. Gnatowski, O. Suberlak, J. Koszkul, Kompozyty (Composites) 6 (4), 66-70 (2006).
• [3] C. Burgstaller, Monatsh Chem. 138 (4), 343-346 (2007).
• [4] El-Haggar, M. Salah, A. Mokhtar, Advances in Composite Materials-Analysis of Natural and Man-Made Materials, Publishing In-Tech, 2011.
• [5] N.M. Stark, Forest Prod. J. 6 (49), 39-46 (1999).
• [6] P. Lyutyy, P. Bekhta, J. Sedliacik, G. Ortynska, Acta Facultatis Xylologiae Zvolen 56 (1), 39-50 (2014).
• [7] I. Michalska-Pożoga, T. Rydzkowski, Polimery (Polymer) 61 (3), 202-210 (2016).
• [8] C. Gozdecki, S. Zajchowski, M. Kociszewski, A. Wilczyński, J. Mirowski, Polimery (Polymer) 56 (5), 375-380 (2011).
• [9] C.M. Clemons, R.E. Ibach, Forest Prod. J. 54 (4), 50-57 (2004).
• [10] Md. Rezaur Rahman, Kompozyty (Composites): Part A 39, 1739-1747 (2008).
• [11] S. Kuciel, A. Liber-Kneć, S. Zajchowski, Mechanika (Mechanics) 3 (106), 195-200 (2009).
• [12] P.F. Sommerhuber, J. Welling, A. Krause, Waste Manage 46, 76-85 (2015), https://doi.org/10.1016/j.wasman.2015.09.011.
• [13] E. Olakanmi, M. Strydom, Mater Chem and Phys 171, 290-302 (2016), https://doi.org/10.1016/j.matchemphys.2016.01.020.
• [14] R. Cyga, K. Czaja, Przemysł Chemiczny (Chemical Industry) 87(9), 932-936 (2008).
• [15] S. Zajchowski, C. Gozdecki, M. Kociszewski, Kompozyty (Composites) 5 (3), 45-50 (2005).
• [16] K. Sałasińska, J. Ryszkowska, Polimery 58 (6), 461-466 (2013).
• [17] P.W. Balasuriya, Lin Ye, Y.W. Mai, Composites Part A Applied Science and Manufacturing 32 (5), 619-629 (2001).
• [18] A.K. Bledzki, J. Gassan, Prog. Polym. Sci. 24, 221-274 (1999). https://doi.org/10.1016/S0079-6700(98)00018-5
• [19] A. Wechsler, S. Hiziroglu, Mater. Design 30, 4183-4191 (2009).
• [20] V.N. Hristov, R. Lach, W. Grellmann, Polym. Test. 23, 581-590 (2004).
• [21] K. Sałasińska, M. Barczewski, M. Borucka, R.L. Górny, P. Kozikowski, M. Celiński, A. Gajek, Polymers 11 (8), 1234 (2019). https://doi:10.3390/polym11081234
• [22] M. Barczewski, K. Sałasińska, J. Szulc, Polymer Test 75, 1-11 (2019). https://doi:10.1016/j.polymertesting.2019.01.017

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).