Archives of Civil and Mechanical Engineering - Tom Vol. 23, no. 4 (2023) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 23, no. 4

Czasopismo

Archives of Civil and Mechanical Engineering

Wydawca

Springer
Wrocław University of Science and Technology

Rocznik

2023

Identyfikatory

Zawartość wolumenu

Vol. 23, no. 4
- artykuł: Pre- and post-heating mechanical properties of concrete containing recycled fine aggregate as partial replacement of natural sand and nano-silica as partial replacement of cement: experiments and predictions (Shirvani Mohammad Asghari, Khodaparast Afshin, Herozi Morteza Rezaeizadeh, Mousavi Reza, Fallah-Valukolaee Saber), s. art. e219, 1--27
- artykuł: Seismic applicability analysis of high‑speed railway multi‑span simply‑supported bridges based on simplified model (Jiang Lizhong, Zhao Yinting, Zhang Yuntain, Zhou Wangbao, Zhong Bufan, Lai Zhipeng, Feng Yulin), s. art. e220, 1--20
- artykuł: Study on the influence of joint dip angle and spacing on rock fragmentation by TBM double disc cutters (Kang Yiqiang, Yang Renshu, Yang Liyun, Li Yougliang, Yao Man, Gu Shirui), s. art. e222, 1--15
- artykuł: Energy absorption, free and forced vibrations of flexoelectric nanocomposite magnetostrictive sandwich nanoplates with single sinusoidal edge on the frictional torsional viscoelastic medium (Chu C., Shan L., Al‑Furjan M. S. H., Farrokhian A., Kolahchi R.), s. art. e223, 1--28
- artykuł: Comparison of finite element and smoothed-particle hydrodynamics models in the simulation of hypereutectic Al Si alloy friction surfacing: calibrations from experiment (Bararpour Seyedeh Marjan, Aval Hamed Jamshidi, Jamaati Roohollah, Javidani Mousa), s. art. e224, s. 1--17
- artykuł: Theoretical analysis and verification of the influence of bubble, pore throat and water film on pore water seepage characteristics‑taking sandstone as the research object (Fan Shengyuan, Song Zhanping, Li Xu, Tian Xiaoxu, Liu Lianbaichao, Li Kanglin), s. art. e225, 1--21
- artykuł: Study of the head and neck injury risk under impact conditions of the light UAV with a medium weight (Wang Jiaming, Li Zhigang, Lan Hiuqing, Cao Liying, Hao Zengtao, Bai Chunyu, Yang Zhen), s. art. e226, 1--21
- artykuł: Static properties and impact resistance performance of U-shaped PU-modified concrete under repeated drop-weight impact load (Laqsum Saleh Ahmad, Zhu Han, Bo Zhao, Haruna S. I., Al-shawafi Ali, Borito Said Mirgan), s. art. e227, s. 1-20
- artykuł: Numerical study on the static bending and forced vibration of triclinic plate with arbitrary boundary conditions (Karami Behrouz, Janghorban Maziar), s. art. e228, 1--32
- artykuł: Spark plasma sintering of Al-SiC composites with high SiC content: study of microstructure and tribological properties (Leszczyńska-Madej Beata, Madej Marcin, Wąsik Anna, Garbiec Dariusz), s. art. e229, 1--13
- artykuł: Slag/diatomite based alkali activated lightweight composites containing waste andesite sand: mechanical, insulating, microstructural and durability properties (Bayraktar Oguzhan Yavuz, Yakupoglu Ugur, Benli Ahmed), s. art. e230, s. 1--26
- artykuł: Mechanism of microstructure evolution and improved mechanical properties in two‑pass friction stir welding of titanium to aluminum (Kar Amlan), s. art. e231, 1--13
- artykuł: Numerical modeling of multi ionic transport with/without electrical feld applied in sound and microcracked ordinary and ultra-high performance fiber reinforced concrete (Chen Xuande, Conciatori David, Sanchez Tomas, Sorelli Luca, Selma Brahim, Mohamed Chekired), s. art. e232, 1--21
- artykuł: Antipathogenic copper coatings: electrodeposition process and microstructure analysis (Bigos Agnieszka, Bugajska Monika, Kwiecień Izabela, Janusz-Skuza Marta, Szczerba Maciej, Ozga Piotr, Wierzbicka-Miernik Anna, Dyner Marcin, Misztela Andrzej, Dyner Aneta, Wojewoda-Budka Joanna), s. art. e233, s. 1--11
- artykuł: Non-destructive testing method on the compressive strength of ice materials based on the rebound method (Wu Yue, Huang Junkai, Lou Xiaonan), s. art. e234, 1--17
- artykuł: Estimating compressive strength of early age frost damaged recycled aggregate concrete using nondestructive evaluation techniques (Choi Yeung So, Lee Won Jun, Yang Eun Ik), s. art. e235, 1--14
- artykuł: Analysis of the pulsating properties of a high‑pressure water jet generated in a self‑excited head for erosion processing (Szada-Borzyszkowska Monika, Kacalak Wojciech, Banaszek Kamil, Borkowski Przemysław J., Szada-Borzyszkowski Wiesław), s. art. e236, 1--16
- artykuł: Biological properties of surface modifed 316 LVM steel (Dyner Aneta, Major Roman, Major Łukasz, Szewczenko Janusz, Lukaszkowicz Krzysztof, Barabaszová Karla Čech, Krzywiecki Maciej, Basiaga Marcin), s. art. e237, s. 1--14
- artykuł: Flexural performance of precast hollow core slabs strengthened with textile reinforced highly ductile concrete (TRHDC) (Song Shifei, Deng Mingke, Yang Jiasheng, Li Ruizhe, Zhang Yangxi), s. art. e238, 1--15
- artykuł: Prediction of forming limit for sheet metals between equi‑biaxial tension and uniaxial tension using a new ductile fracture criterion (Zheng Lihuang, Wang Zhongjin, Wan Min, Meng Bao), s. art. e239, 1--15
- artykuł: Application of processing maps and numerical modelling for identification of parameters and limitations of hot forging process of 80MnSi8-6 steel (Wojtaszek Marek, Lisiecki Łukasz, Łukaszek-Sołek Aneta, Korpała Grzegorz, Zyguła Krystian, Śleboda Tomasz, Jabłońska Magdalena Barbara, Prahl Urlich), s. art. e240, 1--22
- artykuł: Nitriding of hardfaced layers as a method of improving wear resistance of hot forging tools (Widomski Paweł, Kaszuba Marcin, Sokołowski Paweł, Lange Artur, Walczak Mariusz, Długozima Marcin, Gierek Mateusz, Chocyk Dariusz, Gładyszewski Grzegorz, Boryczko Bożena), s. art. e241, 1--16
- artykuł: Effect of CFRP anchorages on the flexural behavior of externally strengthened reinforced concrete beams (Abdalla Jamal A.), s. art. e242, 1--15
- artykuł: Enhancing seismic performance of buckling-restrained brace frames equipped with innovative bracing systems (Mohebi Benyamin, Sartipi Mohammad, Kazemi Farzin), s. art. e243, 1--21
- artykuł: Breakthrough the strength-ductility trade-off in AA7075 alloy by gradient microstructure (Ghorbani Hamid, Jamaati Roohollah), s. art. e245, 1--13
- artykuł: Chemistry and microstructure of duplex stainless steel powders from recycled Z100 mixed with 316L steels (Kateusz Filip, Polkowska Adelajda, Polkowski Wojciech, Chrzan Konrad, Jaśkowiec Krzysztof, Sokołowski Paweł, Igartua Amaya, Leunda Josu, Bisztyga-Szklarz Magdalena, Dudziak Tomasz, Jedliński Jerzy), s. art. e246, 1--13
- artykuł: Tailoring the microstructure and mechanical properties of superaustenitic stainless steel by cold rolling and recrystallization annealing (Sohrabi Mohammad Javad, Mirzadeh Hamed, Roosteil Milad), s. art. e247, 1--10
- artykuł: Effect of in‑plane damage on the out‑of‑plane mechanical performance of infill walls with recycled concrete blocks (Yang Yong, Xue Jianyang, Luo Zheng, Gao Liang), s. art. e248, 1-22
- artykuł: Effect of high temperature annealing on the microstructure evolution and hardness behavior of the Inconel 625 superalloy additively manufactured by laser powder bed fusion (Dubiel Beata, Gola Kewin, Staroń Sylwia, Pasiowiec Hubert, Indyka Paulina, Gajewska Marta, Zubko Maciej, Kalemba-Rec Izabela, Moskalewicz Tomasz, Kąc Sławomir), s. art. e249, s. 1--20
- artykuł: Projectile impact response of prestressed fiber‑reinforced concrete slabs having perforated steel lining (Abbas Husain, Siddiqui Nadeem, Almusallam Tarek, Elsanadedy Hussein, Abadel Aref, Al-Salloum Yousef), s. art. e250, 1--15
- artykuł: Feasibility of preparing self‑compacting mortar via municipal solid waste incineration bottom ash: an experimental study (Wang Qun, Chu Hongyan, Shi Wenfran, Jiang Jinyang, Wang Fengjuan), s. art. e251, 1--16
- artykuł: Effect of a novel controlled thermomechanical treatment on the microstructure and mechanical properties of a high‑carbon nanobainitic steel (Janus K., Rogal L., Dudkiewicz J., Chulist R., Korpała G., Prahl U., Konczak K., Kochmański P., Nalepka K., Maziarz W.), s. art. e252, 1--17
- artykuł: Investigation of slip systems activity and grain boundary sliding in fine‑grained superplastic zinc alloy (Bednarczyk Wiktor, Kawałko Jakub, Wątroba Maria, Szuwarzyński Michał, Bała Piotr), s. art. e253, 1--11
- artykuł: Acoustic emission with machine learning in fracture of composites: preliminary study (Smolnicki Michał, Duda Szymon, Stabla Paweł, Zielonka Paweł, Lesiuk Grzegorz), s. art. e254, 1--18
- artykuł: Advancements in electromagnetic interference shielding effectiveness and structural performance of reinforced concrete structures (Yuan Tian‑Feng, Parr Jean-Luc Malan, Choi Jin‑Seok, Yoon Young‑Soo), s. art. e255, 1--16
- artykuł: Enhancing heat and mass transfer to suppress void defects in friction stir welding by superimposing ultrasonic vibration (Wang Xue, Zhang Xiankun, Shi Lei, Wu Chuangsong, Chen Gaoqiang), s. art. e256, 1--16
- artykuł: Anchorage zone behavior and strength prediction of high‑performance concrete containing coarse aggregate confined with spirals (Li Sheng, Zheng Wenzhong, Zhou Wei, Li Ruisen, Qiu Xianyelin), s. art. e257, 1--19
- artykuł: Reliability of depleted cement–ground slab with waste granodiorite dust admixture on semi-saturated substrate (Wyborski Piotr, Kania Tomasz, Kozubal Janusz Vitalis, Zięba Zofia, Mońka Jakub), s. art. e258, 1--26
- artykuł: Electron beam welding beam current on microstructure and mechanical properties of AISI 316 austenitic stainless steel (Li Huaying, Huang Fang, Li Jiacai, Li Juan, Zhao Guang-hui, Chang Yuan), s. art. e259, 1--19
- artykuł: A unified design model for estimating tunnel performance considering multiple excavation stoppages (Wu Kui, Xing Chenzhe, Yang Yuezong, Shao Zhushan, Zhao Nannan, Chu Zhaofei), s. art. e260, 1--14
- artykuł: Seismic behavior of high-rise reinforced concrete walls with flange subjected to corrosion under low cyclic loading: an experimental research and numerical model (Yang Lu, Zheng Shan-Suo, Zheng Yue, Liu Hua, Wu Hong-Lin, Zhang Zhi-Wei), s. art. e261, 1--27
- artykuł: Investigation of electromagnetic punching process with adjustable collision velocity for ultra‑thin titanium sheet (Huang Yifan, Wu Zelin, Dong Pengxin, Liu Runze, Chen Yao, Han Xiaotao), s. art. e263, 1--17
- artykuł: Synergistic effects of hybrid macro basalt fibers and micro fibers on the mechanical properties of UHPC (Chen Zhiyuan, Wang Xin, Ding Lining, Jiang Kaidi, Huang Huang, Liu Jianxun, Wu Zhishen), s. art. e264, 1-20
- artykuł: The comparison of pullout strengths of various producing methods for internal screw threads of additive manufactured metal parts (Yarar Eser, Ertürk Alpay Tamer, Özer Gökhan, Bulduk Mustafa Enes), s. art. e265, 1--13
- artykuł: Investigation of thermal and mechanical properties of perlite‑based lightweight geopolymer composites (Demir Ilhami, Güzelküçük Selahattin, Sevim Ozer, Şimşek Osman), s. art. e266, 1--10.
- artykuł: Utilization of waste C30 concrete in permeable mortar: mechanical property, permeability mechanism, life cycle assessment (Wang Chao-qiang, Zeng Ze-yu, Li Heng-feng, Yang Fei-hua), s. art. e267, s. 1--25
- artykuł: Extension of a novel higher order modeling to the vibration responses of sandwich graphene origami cylindrical panel (Vali Hossein, Arefi Mohammad), s. art. e268, 1--27

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.