Reducing of on polymerization shrinkage by application of UV curable dental restorative composites

• Autorzy: Świderska J. , Czech Z. , Świderski W. , Kowalczyk A.

Identyfikatory

DOI

10.2478/pjct-2014-0050

• Języki publikacji: EN

Abstrakty

EN

This manuscript describes dental compositions contain in-organic fillers, multifunctional methacrylates and photoinitiators. The main problem by application and UV curing process is the shrinkage of photoreactive dental materials during and after UV curing process. Total shrinkage of UV curable dental composites is a phenomenon of polymerization shrinkage, typical behavior for multifunctional methacrylates during polymerization process. The important factors by curing of dental composites are: kind and concentration of used methacrylates, their functionality, double bond concentration, kind and concentration of added photoinitiator and UV dose. They are investigated UV-curable dental compositions based on 2,2-bis-[4-(2-hydroxy-3-methacryxloyloxypropyl)phenyl]propane (Bis-GMA) and containing such multifunctional monomers as 1,3-butanediol dimethacrylate (1,3-BDDMA), diethylene glycol dimethacrylate (DEGDMA), tetraethylene glycol dimethacrylate (T3EGDMA), trimethylolpropane trimethacrylate (TMPTMA), polyethylene glycol 200 dimethacrylate (PEG200DA). Reduction of polymerization shrinkage of dental compositions is at the moment a major problem by dental technology.

Słowa kluczowe

EN

dental compositions; polymerization shrinkage; multifunctional methacrylates; UV-curin

• Wydawca: West Pomeranian University of Technology. Publishing House
• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2014
• Tom: Vol. 16, nr 3
• Strony: 51--55
• Opis fizyczny: Bibliogr. 18 poz., rys., tab., wykr., wz.

Twórcy

autor

Świderska J.

• Health Care Center, Bolesława Śmiałego 28, 70-348 Szczecin, Poland

autor

Czech Z.

• West Pomeranian University of Technology, Szczecin, Institute of Chemical Organic Technology, Pułaskiego 10, 70-322 Szczecin, Poland

autor

Świderski W.

• Health Care Center, Bolesława Śmiałego 28, 70-348 Szczecin, Poland

autor

Kowalczyk A.

• West Pomeranian University of Technology, Szczecin, Institute of Chemical Organic Technology, Pułaskiego 10, 70-322 Szczecin, Poland

Bibliografia

• 1. Moszner, N. & Hirt, T. (2012). New Polymer-Chemical Developments in Clinical Dental Polymer Materials: Enamel- -Dentin Adhesives and Restorative Composites, J. Polym. Sci. Part A: Polym. Chem. 50, 4369–4402, DOI: 10.1002/pola.26260.
• 2. Feilzer, A.J. & De Gee, A.J. (1987). Setting stress in composite resin in relation to configuration of the restoration, J. Dent. Res. 66, 1636–1639.
• 3. Moszner, N. & Salz, U. (2007). Recent Developments of New Components for Dental Adhesives and Composites, Macromol. Mater. Eng. 292, 245–271, DOI: 10.1002/mame.200600414.
• 4. Liu, C.F., Collard, S.M. & Armeniades, C.D. (1990). Constant-volume polymerization of composites by addition of ammonia modif ed montmorillonite, Am. J. Dent. 3, 44–50.
• 5. Luo, J., Lannutti, J.J. & Seghi, R.R. (1998). Effect of filler porosity on the abrasion resistance of nanoporous silica gel/polymer composites, Dent. Mater. 14, 29–36.
• 6. Czech, Z. (2001). Solvent-based pressure-sensitive adhesives for PVC surfaces: A special report, Adv. Polym. Techn. 20, 72–85.
• 7. Milker, R. & Czech, Z. (2003). Removable and Repositionable Pressure-Sensitive Adhesive Products, STICK, 3rd European Congress of Adhesive and Sealant Raw Materials, Nürnberg, Germany 117–122.
• 8. Labella, R., Lambrechts, P., Van Meerbeek, B. & Vanherle, G. (1999). Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dent. Mater. 15, 128–137.
• 9. Czech, Z. (2004). Studies of photoreactive acrylic adhesives with high shrinkage resistance, Pol. J. Chem. Technol. 4, 5–9.
• 10. Condon, J.R. & Ferracane, J.L. (2000). Assessing the effect of composite formulation on polymerization stress, J. Am. Dent. Assoc. 131, 497–503.
• 11. Czech, Z., Kowalczyk, A., Kabatc J. & Świderska, J. (2012). Solvent-based of acrylic pressure-sensitive adhesive of low shrinkage, Eur. Polym. J. 48, 1446–1454.
• 12. Kemp-Scholte, C.M. & Davidson, C.L. (1990). Complete marginal seal of Class V resin composite restorations effected by increasing flexibility, J. Dent. Res. 69, 1240–1243.
• 13. Czech, Z., Butwin, A., Kabatc, J. & Świderska, J. (2012). UV-crosslinkable acrylic pressure-sensitive adhesives for industrial application, Polym. Bull. 69, 71–80.
• 14. Davidson, C.L. & De Gee, A.J. (1984). The competition between the composite-dentin bond strength and polymerization contraction stress, J. Dent. Res. 63, 1396–1399.
• 15. Jian, Y., He, Y. & Jiang, T. (2012). Polymerization shrinkage of (meth)acrylate determined by reflective laser beam scanning, J. Polym. Sci. Part B: Polym. Phys. 50, 923–928.
• 16. Singh, A.K., Mehra, D.S. & Niyogi, U.K. (2011). Polyurethane based pressure-sensitive adhesives (PSAs) using electron beam irradiation for medical application, J. Polym. Mater. 28, 525–542.
• 17. Jin, X., Bai, Y., Shao, L., Yang, B. & Tang, Y. (2009). Properties of solvent-borne acrylic pressure-sensitive adhesives synthesized by a simple approach, Exp. Pol. Let. 3, 814–820.
• 18. Czech, Z., Wilpiszewska, K., Tyliszczak, B., Jiang, X., Bai, Y. & Shao, L. (2013), Biodegradable self-adhesive tapes with starch carrier, Int. J. Adhes Adhes 44, 195–199.