Effects of different additives in a waterborne polyacrylate coating on selected surface properties of heat-treated finished wood

• Autorzy: Nowrouzi Zahra , Mohebby Behbood , Ebrahimi Morteza , Petrič Marko

Identyfikatory

DOI

10.12841/wood.1644-3985.377.08

• Języki publikacji: EN

Abstrakty

EN

Color changes of thermally modified timber due to different formulations of polyacrylate coating were studied before and after the application of the coatings. Olive leaf extract as a natural antioxidant-bearing additive was added to polyacrylate to examine any changes in color parameters in comparison with other additives. Water contact angle, surface roughness, and the color parameters in L*a*b* coordinates were measured, and any differences (ΔE*, ΔC*, ΔH*, ΔL*, Δa*, Δb*) were also calculated after applying the formulated coats on the thermally modified wood. The results indicated that lightness decreased after coating. The Δa* value was also increased after application of the olive leaf extract to the thermally treated wood. In general, total color change (ΔE*) was increased after coating. Reduction of ΔC* was found in the coating containing TiO2 with 10% antioxidant. Also, ΔH* was increased by the use of the polyacrylate coating containing TiO2, compared with other coatings. Application of all of the formulated coatings on the wood surface led to improvement in the water contact angle over the evolution time. On the other hand, coating of the treated wood was responsible for the formation of a smooth surface in comparison with the uncoated thermally modified timber.

Słowa kluczowe

EN

thermally modified wood; polyacrylate coating; olive leaf extract; colour change; surface roughness; contact angle

• Wydawca: Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
• Czasopismo: Drewno : prace naukowe, doniesienia, komunikaty
• Rocznik: 2021
• Tom: vol. 64, nr 208
• Strony: 63--78
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Nowrouzi Zahra

• Department of Wood and Paper Science, Tarbiat Modares University, Noor, Iran

autor

Mohebby Behbood

• Department of Wood and Paper Science, Tarbiat Modares University, Noor, Iran

autor

Ebrahimi Morteza

• Department of Paint and Coating, Amirkabir University, Tehran, Iran

autor

Petrič Marko

• Department of Wood Science and Technology, University of Ljubljana, Ljubljana, Slovenia

Bibliografia

• Aloui F., Ahajji A., Irmouli Y., George B., Charrier B., Merlin A. [2006]: Inorganic UV absorbers for the photostabilisation of wood-clear coating systems: comparison with organic UV absorbers. Applied Surface Science 253: 3737-3745
• Ayadi N., Lejeune F., Charrier B., Merlin A. [2003]: Color stability of heat-treated wood during artificial weathering. Holz Roh Werkst 61: 221-226
• Bao Y., Mai J., Zhang X., Shi C. [2015]: Recent advances in the modification of polyacrylate latexes. Journal of Material Science 50: 6839-6863
• Bao Y., Feng C., Wang C., Ma J., Tian C. [2017]: Hygienic, antibacterial, UV-shielding performance of polyacrylate/ZnO composite coatings on a leather matrix. Colloids and Surfaces 518: 232-240
• Cao Y., Jiang J., Lu J., Huang R., Jiang J., Wu Y. [2012]: Color change of Chinese Fir through steam-heat treatment. Bio Resource 7: 2809-2819
• Evans P.D., Hasse J.G., Shakri A., Seman B.M., Kiguchi M. [2015]: The search for durable exterior clear coatings for wood. Journal of Coating 5: 830-86
• Faucheu J., Sung L.P., Wood K.A. [2006]: Relating gloss loss to topographical features of a PVDF coating. Journal of Coatings Technology and Research 3 [1]: 29-39
• Gholamiyan H., Tarmian A., Azadfallah M. [2010]: Gas and water permeability of poplar wood coated with sealer and nitrocellulose lacquer, polyester lacquer and nano-particles. Journal of Forest and Wood Products 63 [1]: 281-291
• Miklečic J., Blagojevič S.L., Petrič M., Jirouˇs-Rajkovic V. [2015]: Influence of TiO2 and ZnO nanoparticles on properties of water borne polyacrylate coating exposed to outdoor conditions. Progress in Organic Coating 89: 67-74
• Nowrouzi E., Mohebby B. [2016]: Impact of different coating on some surface properties of beech wood. Iranian Journal of Forest and Wood 69 [1]: 173-184
• Plelit H. [2017]: The effect of different wood varnishes on surface color properties of heat treated wood materials. Faculty Forest University Istanbul 76 [2]: 262-274
• Saha S., Kocaefe D., Boluk Y., Pichette A. [2011]: Enhancing exterior durability of Jack Pine by photo-stabilization of acrylic polyurethane coating using bark extract. Part 1: Effect of UV on color change and ATR–FT-IR analysis. Progress in Organic Coating 70: 376-382
• Saha S., Kocaefe D., Krause C., Boluk Y., Pichette A. [2013]: Enhancing exterior durability of heat treated Jack Pine by photo-stabilization by acrylic polyurethane coating using bark extract, Part 2: Wetting characteristics and fluorescence microscopy analysis. Journal of Progress in Organic Coating 76: 504-512
• Shi J.L., Kocaefe D., Amburgey T., Zhang J.A. [2007]: Comparative study on brown-rot fungus decay and subterranean termite resistance of thermally-modified and ACQ-Ctreated wood. Holz Roh Werkst 65: 353-358
• List of standards
• ASTM D2224-02:2016 Standard practice for calculation of color tolerances and color differences from instrumentally measured color coordinates.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).