An approach for measurement uncertainty evaluation of cutting force in machining by turning

• Autorzy: Kuzinovski M. , Trajčevski N. , Tomov M. , Cichosz P. , Skowronek H.
• Konferencja: VIII Konferencja Szkoły Obróbki Skrawaniem. Synergia nauki z przemysłem, Międzyzdroje – Szczecin, 17-19.09.2014
• Języki publikacji: EN

Słowa kluczowe

EN

cutting force; machining by turning; measurement uncertainty

PL

siła cięcia; obróbka skrawaniem; niepewność miar

• Wydawca: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
• Czasopismo: Mechanik
• Rocznik: 2014
• Tom: R. 87, nr 8-9CD2
• Strony: 55—62
• Opis fizyczny: Bibliogr. 7 poz., rys., tab.

Twórcy

autor

Kuzinovski M.

• Cyril and Methodius University in Skopje, Macedonia, Faculty of Mechanical Engineering

autor

Trajčevski N.

• Goce Delčev University, Military academy, ul. Vasko Karangjeleski bb, Skopje, Macedonia

autor

Tomov M.

• Cyril and Methodius University in Skopje, Macedonia, Faculty of Mechanical Engineering

autor

Cichosz P.

• Institute of Production Engineering and Automation of the Wroclaw University of Technology

autor

Skowronek H.

• Institute of Production Engineering and Automation of the Wroclaw University of Technology, Poland

Bibliografia

• [1] AXINTE D.A., BELLUCO W., DE CHIFFRE L., Evaluation of cutting force uncertainty components in turning. International Journal of Machine Tools & Manufacture 41, Elsevier Ltd, page 719-730, 2001.
• [2] TRAJČEVSKI N., Development of methodology to assess the quality of experimental results during research of physical phenomena in the process of machining by material removal. PhD thesis, University "Ss. Cyril and Methodius", Faculty of Mechanical Engineering, Skopje, Republic of Macedonia, 2013.
• [3] Joint Committee for Guides in Metrology (JCGM): Guide to the expression of uncertainty in measurement, GUM 1995 with minor modifications. JCGM 100:2008 (ISO/IEC Guide 98-3:2008), JCGM, 2008.
• [4] KUZINOVSKI M., TRAJČEVSKI N., FILIPOSKI V., CICHOSZ P., Computer aided system for investigation of cutting forces and temperature in turning, GÓRNICTWO ODKRYWKOWE, ISSN 0043-2075, Rocznik XLVIII, Nr 7-8, pages 10-14, Wroclaw, Poland, 2006.
• [5] BARTEL T., Uncertainty in NIST Force Measurements, Journal of Research of the National Institute of Standards and Technology, Volume 110, Number 6, November-December 2005.
• [6] EURAMET: Uncertainty of force measurements, Calibration Guide, EURAMET cg-4, Version 2.0, European Association of National Metrology Institutes, ISBN 978-3-942992-03-9, 2011.
• [7] BRAY A., BARBATO G., FRANCESCHINI F., XHOMO E., Rotational and End effect: a model for uncertainty evaluation in force measurements by means of dynamometers, Measurement Vol. 17, No. 4, pp. 279-286, 1996.