Displacement monitoring and sensitivity analysis in the observational method

• Autorzy: Górska K. , Muszyński Z , Rybak J.

Identyfikatory

DOI

10.2478/sgem-2013-0028

• Języki publikacji: EN

Abstrakty

EN

This work discusses the fundamentals of designing deep excavation support by means of observational method. The effective tools for optimum designing with the use of the observational method are both inclinometric and geodetic monitoring, which provide data for the systematically updated calibration of the numerical computational model. The analysis included methods for selecting data for the design (by choosing the basic random variables), as well as methods for an on-going verification of the results of numeric calculations (e.g., MES) by way of measuring the structure displacement using geodetic and inclinometric techniques. The presented example shows the sensitivity analysis of the calculation model for a cantilever wall in non-cohesive soil; that analysis makes it possible to select the data to be later subject to calibration. The paper presents the results of measurements of a sheet pile wall displacement, carried out by means of inclinometric method and, simultaneously, two geodetic methods, successively with the deepening of the excavation. This work includes also critical comments regarding the usefulness of the obtained data, as well as practical aspects of taking measurement in the conditions of on-going construction works.

Słowa kluczowe

EN

monitoring; observation method; sensitivity analysis

PL

monitoring; metoda obserwacyjna; analiza wrażliwości

• Wydawca: De Gruyter
• Czasopismo: Studia Geotechnica et Mechanica
• Rocznik: 2013
• Tom: Vol. 35, nr 3
• Strony: 25--43
• Opis fizyczny: Bibliogr. 13 poz., tab., rys.

Twórcy

autor

Górska K.

• Wrocław University of Technology, Faculty of Civil Engineering, Institute of Geotechnics and Hydroengineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland,

autor

Muszyński Z

• Wrocław University of Technology, Faculty of Civil Engineering, Institute of Geotechnics and Hydroengineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland

autor

Rybak J.

• Wrocław University of Technology, Faculty of Civil Engineering, Institute of Geotechnics and Hydroengineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland

Bibliografia

• [1] BROŚ B., Metoda obserwacyjna w rozwiązywaniu zagadnień geotechnicznych, VII Krajowa Konferencja Mechaniki Gruntów i Fundamentowania, Wydawnictwo Politechniki Poznańskiej, 1984.
• [2] BRYŚ H., Geodezyjne pomiary odkształceń i przemieszczeń zapor wodnych, Wydawnictwo Politechniki Krakowskiej, Kraków, 1996.
• [3] DUNCAN J.M., Factors of safety and reliability in geotechnical engineering, ASCE Journal of Geotechnical and Geoenvironmental Engineering, 2002, Vol. 126, No. 7.
• [4] DUNNICLIFF J., Geotechnical instrumentation for monitoring field performance, Wiley, New York, 2004.
• [5] GÓRSKA K., WYJADŁOWSKI M., Analysis of displacement of excavation based on inclinometer measurements, Studia Geotechnica et Mechanica, 2012, Vol. XXXIV, No. 4.
• [6] KARSZNIA K., Geodezyjny i geotechniczny monitoring obiektów inżynierskich w ujęciu dynamicznym. Wykrywanie słabych punktów. Nowoczesne Budownictwo Inżynieryjne, 2008, No. 4.
• [7] LONG M., Database for retaining wall and ground movements due to deep excavations, ASCE Journal of Geotechnical and Geoenvironmental Engineering, 2001, Vol. 127, No. 3.
• [8] PECK R.B., Advantages and limitations of the observational method in applied soil mechanics, 9th Rankine Lecture, Geotechnique, 1969, No. 2.
• [9] PORSVIG M., THORSEN T., Reliability index for an anchored sheet pile wall, International Symposium. Limit state design in geotechnical engineering. Danish Geotechnical Society, Vol. 2, Copenhagen, 1993.
• [10] RYBAK J., ZAREMBA S., Zastosowania pomiarów geodezyjnych w geotechnice, Geodezja w budownictwie, Materiały jubileuszowej sesji naukowej, Gdańsk, 18.06.1999.
• [11] van CRANENBROECK J., BROWN N., Networking Motorized Total Stations and GPS Receivers for Deformation Measurements, FIG Working Week, May 22–27, Athens, Greece, 2004.
• [12] WHITMAN R.V., Evaluating calculated risk in geotechnical engineering, ASCE Journal of Geotechnical Engineering, 1984, Vol. 110, No. 2.
• [13] WHITMAN R.V., Organizing and evaluating uncertainty in geotechnical engineering, ASCE Journal of Geotechnical and Geoenvironmental Engineering, 2000, Vol. 126, No. 7.