Identification of scale formed on Cr-Ni cast steel

• Autorzy: Zapała R. , Kalandyk B.
• Języki publikacji: EN

Abstrakty

EN

An attempt has been made to identify the scale formed on austenitic chromium-nickel cast steel with additions of Ti and Zr during oxidising at temperatures of 820 and 1000 °C. The scale identification was done by the technique of scanning microscopy, by X-ray diffraction phase analysis in Bragg-Brentano geometry with constant angle of incidence, and by scratch test.

Słowa kluczowe

EN

alloys Fe-Cr-Ni; titanium; Zirconium; high temperature corrosion; morphology of scale

PL

stopy Fe-Cr-Ni; tytan; cyrkon; korozja wysokotemperaturowa

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 4
• Strony: 217--220
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Zapała R.

• University of Science and Technology, Faculty of Foundry Engineering, Department of Cast Alloys and Composites Engineering, 23 Reymonta St., 30-059 Cracow, Poland

autor

Kalandyk B.

• University of Science and Technology, Faculty of Foundry Engineering, Department of Cast Alloys and Composites Engineering, 23 Reymonta St., 30-059 Cracow, Poland

Bibliografia

• [1] E.A. Kenik, P. J. Maziasz, R. W. Swinderman, J. Cervenka, D. May, Structure and phase stability in cast modified-HP austenite after long-term ageing, Scripta Materialia, vol. 49, No. 2 (2003) 117-122.
• [2] C. W. Thomas, K.J. Stevens, M.J. Ryan, Microstructure and properties of alloy HP50-Nb comparison of as cast and service exposed materials, Materials Science and Technology, vol. 12, No. 4 (1996) 469-475.
• [3] L.H. de Almeida, A.F. Ribeiro, I. Le May, Microstructural characterization of modified 25Cr-35Ni centrifugally cast steel furnace tubes, Materials Characterization, vol. 49, No. 3 (2002) 219-229.
• [4] P. Kofstad, High temperature corrosion, Elsevier Applied Science, Wyd. 10, London - New York (1988).
• [5] D. Landolt, Corrosion and surface chemistry of metals, EPFL Press, Lausanne, (2007).
• [6] A.S. Khanna, Introduction to high temperature oxidation and corrosion, ASM International, Materials Park (2002).
• [7] Rundell G., McConnel J.: Oxidation resistance of eight heat-resistant alloys at 870, 980, 1095 and 1150°C. Oxidation of Metals 1991 R. 36 nr3/4 s.253-261.
• [8] Nagelberg A.S.: Oxidation of titanium modified type 310 stainless steel in low oxygen partial pressure atmosphere. Oxidation of Metals 1982 R. 17 nr 5/6, s. 415-427.
• [9] Bull S. J.: Spallation failure maps from scratch testing. Materials at High Temperatures. 1995 R. 13 nr 4 s. 169-174.