Possibilities to Obtain Products from 2024 and 7075 Chips in the Process of Consolidation by KoBo Extrusion

• Autorzy: Pawłowska B. , Śliwa R. E. , Zwolak M.

Identyfikatory

DOI

10.24425/amm.2019.130083

• Języki publikacji: EN

Abstrakty

EN

Basing on experimental data, the possibility of consolidating side products of turning, milling and drilling of aluminum alloys into the form and properties of solids metals using low-temperature KoBo extrusion method has been assessed. Research regarding mechanical and structural properties of the final products revealed their total consolidation and proved their compatibility with requirements for products made of bulk billets. Importantly, the chips consolidation process does not require high or even raised temperature, which significantly reduces the unfavorable phenomenon of chips oxidation and its negative influence on the structure and mechanical properties of products. A very good effect of chips compaction has been proved by KoBo method, which has been confirmed by relatively slightly different mechanical properties of the material after recycling compared with the bulk one. Among currently applied techniques of consolidation of dispersed fractions in a solid state (leaving the melting stage out), the KoBo method seems an innovative way of utilizing metallic chips, as it enables a cold deformation process.The paper presents investigations using 2024 and 7075 aluminum alloys chips from manufacturing process, formed into briquettes and deformed under conditions of KoBo extrusion process, which enables to obtain long product by cold forming. The final product characterized by good microstructures, mechanical features and low cost of production.

Słowa kluczowe

EN

metallic chips; KoBo method; cold plastic consolidation; structural properties of extrudate; mechanical properties of extrudate

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 4
• Strony: 1213--1221
• Opis fizyczny: Bibliogr. 38 poz., fot., rys., tab.

Twórcy

autor

Pawłowska B.

• Rzeszow University of Technology, 12 Powstańców Warszawy Av, 35-959 Rzeszów, Poland

autor

Śliwa R. E.

• Rzeszow University of Technology, 12 Powstańców Warszawy Av, 35-959 Rzeszów, Poland

autor

Zwolak M.

• Rzeszow University of Technology, 12 Powstańców Warszawy Av, 35-959 Rzeszów, Poland

Bibliografia

• [1] J. Lendvai, Mater. Sci. Forum 43, 217-222 (1996).
• [2] J. M. Lianga, Z. Zhanga, M. T. Jiab, L. Caoa, C. G. Lia, H. Y. Gaoa, J. Wanga, D. L. Zhanga, Materials Science & Engineering A 729, 29 (2018).
• [3] T. G. Gutowski, J. M. Allwood, C. Herrmann, S. Sahni, Annual Review of Environment and Resources 38, 81 (2013).
• [4] K. Kondoh, T. Luangvaranunt, T. Aizawa, Mater. Trans. 43, 322 (2002).
• [5] D. R. Cooper, J. Song, R. Gerard, Journal of Cleaner Production 200, 282 (2018).
• [6] M. Sumair, U. Rahman, L. Jayahari, Materials Today: Proceedings 5, 20117 (2018).
• [7] Y. Wanga, H. Xua, M. Hua, S. Sugiyamab, Z. Jia, Results in Physics 12, 718 (2019).
• [8] S. Shamsudin, Z. W. Zhong , S. N. Rahim , M. A. Lajis, Int. J. Adv. Manuf. Technol. 90, 2631 (2017).
• [9] K. Topolski, W. Bochniak, M. Łagoda, P. Ostachowski, H. Garbacz, Journal of Materials Processing Technology 248, 80 (2017).
• [10] J. Gronostajski, A. Matuszak, J. Mater. Process. Technol. 92-93, 35 (1999).
• [11] R. Chiba, M. Yoshimura, J. Manuf. Processes 17, 1 (2015).
• [12] S. N. Rahim, M. A. Lajis, S. Ariffin, Procedia CIRP 26, 761 (2015).
• [13] D. Baffari, G. Buffa, D. Campanella, L. Fratini, Procedia Manufacturing 15, 280 (2018).
• [14] S. Shamsudin, M. A. Lajis, Z. W. Zhong, Procedia CIRP 40, 256 (2016).
• [15] M. Haase, A. E. Tekkaya, J. Mater. Process. Technol. 217, 356 (2015).
• [16] R. Chiba, T. Nakamura, M. Kuroda, J. Mater. Process. Technol. 211, 1878 (2011).
• [17] H. Sato, T. Aida, N. Takatsuji, K. Matsuki, K. Murotani, J. Jpn. Inst. Light Met. 54, 14 (2004).
• [18] V. Güley, N. B. Khalifa, A. E. Tekkaya, Int. J. Mater. Form. 3, 853 (2010).
• [19] T. Peng, Q. D. Wang, J. B. Lin, Mater. Sci. Eng. A 516, 23 (2009).
• [20] B. Pawłowska, R. E. Śliwa, Metal Forming 28, 301 (2017).
• [21] H. Dybiec, K. Pieła, J. Piotrowska, Rudy i Metale Nieżelazne 54, 676 (2009).
• [22] J. Gronostajski, H. Marciniak, A. Matuszak, Journal of Materials Processing Technology 106, 34 (2000).
• [23] J. Green, Aluminum Recycling and Processing for Energy Conservation and Sustainability, Clevlend 2007.
• [24] A. Korbel, W. Bochniak, U.S. Patent No. 5, 737, 959 (1998), European Patent No. 0711210 (2000).
• [25] A. Korbel, W. Bochniak, Scripta Materialia 51, 755 (2004).
• [26] A. Korbel, W. Bochniak, J. Borowski, L. Błaż, P. Ostachowski, M. Łagoda, Journal of Materials Processing Technology 216, 160 (2015).
• [27] M. Zwolak, R. E. Śliwa, Metal Forming 28, 317 (2017).
• [28] J. Kawałko, M. Wroński, M. Bieda, K. Sztwiertnia, K. Wierzbanowski, D. Wojtas, M. Łagoda, P. Ostachowski, W. Pachla, M. Kulczyk, Materials Characterization 141, 19 (2018).
• [29] W. Bochniak, A. Korbel, Journal of Materials Processing Technology 134, 120 (2003).
• [30] P. Koprowski, M. Bieda, S. Boczkal, A. Jarzębska, P. Ostachowski, J. Kawałko, T. Czeppe, W. Maziarz, M. Łagoda, K. Sztwiertnia, Journal of Materials Processing Tech. 253, 34 (2018).
• [31] W. Bochniak, K. Marszowski, A. Korbel, Journal of Materials Processing Technology 169, 44 (2005).
• [32] R. Bogucki, K. Sulikowska, M. Bieda, P. Ostachowski, K. Sztwiertnia, Arch. Metall. Mater. 60, 3063, (2015).
• [33] A. Korbel, W. Bochniak, P. Ostochowski, L. Błaż, Metallurgical and Materials Transactions 42, 2881 (2011).
• [34] J. Kawałko, P. Bobrowski, P. Koprowski, A. Jarzębska, M. Bieda, M. Łagoda, K. Sztwiertnia, Journal of Alloys and Compounds 707, 298 (2017).
• [35] A. Korbel, W. Bochniak, Philosophical Magazine 93, 1883 (2013).
• [36] A. Korbel, W. Bochniak, R. Śliwa, P. Ostachowski, M. Łagoda, Z. Kusion, B. Trzebuniak, Metal Forming 27, 133 (2016).
• [37] W. Bochniak, A. Korbel, P. Ostachowski, S. Ziółkiewicz, J. Borowski, Metal Forming 24, 83 (2013).
• [38] K. Pieła, L. Błaż, M. Jaskowski, Arch. Metall. Mater. 58, 683 (2013).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).