Evaluation of slag regime in ladle during utilization of briquetted synthetic slag in VHM a.s.

• Autorzy: Socha L. , Bazan J. , Gryc K. , Machovcak P. , Opler A. , Trefil A. , Melecky J.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The paper focuses on evaluation of slag regime by the help of synthetic slags based on Al2O3. The comparion of influence of synthetic slags on the production of two chosen grades of steels focused on evaluation of effectivity of created refining slag during treatment in the secondary metallurgy was the objective of plant experiments. Design/methodology/approach:During evaluation of slag regime in the ladle, steel samples for assessment of desulphurization degree were taken under the plant conditions. Slag samples were also taken for evaluation of chosen parameters: basicity, content of easily reducible oxides, proportion of CaO/Al2O3 and Mannesmann’s index. The temperature and oxygen activity in steel was continuously measured too. Findings: From plant experiments, it was found out that during using of two different types of synthetic slags during production of steel grades St52-3 and S34MnV similar values of desulphurization degree were achieved. Chosen parameters of ladle slag were monitored and it was demonstrated that the developed synthetic slag B reaches the results comparable with the standard used synthetic slag A. Research limitations/implications: Plant experiments were made under conditions of VÍTKOVICE HEAVY MACHINERY a.s. plant Obtained results are limited by the testing during production of two different steel grades St52-3, S34MnV and by the specific technology of production formed by EAF→LF→VD/VCD. Practical implications: The research results made it possible to realize the optimalization of slag regime under the plant conditions of VÍTKOVICE HEAVY MACHINERY a.s. plant. It was proved that developed synthetic slag B from the company JAP TRADING s.r.o. can adequately replace the common synthetic slag A. Originality/value:Results mentioned in this paper are intended for steel producers and they represent basic information about possibilities of slag regime optimalization in the ladle.

Słowa kluczowe

EN

steel; desulphurisation; synthetic slag; slag regime

PL

stal; odsiarczanie; żużel syntetyczny; rafinacja pozapiecowa

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2012
• Tom: Vol. 57, nr 2
• Strony: 80--87

Twórcy

autor

Socha L.

• Department of Metallurgy and Foundry, FMME, VŠB-Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic

autor

Bazan J.

• Department of Metallurgy and Foundry, FMME, VŠB-Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic

autor

Gryc K.

• Department of Metallurgy and Foundry, FMME, VŠB-Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic

autor

Machovcak P.

autor

Opler A.

autor

Trefil A.

autor

Melecky J.

Bibliografia

• [1] A. Ghost, A. Chatterjee, Ironmaking and steelmaking, Theory and practice, PHI Learning Private Limited, 2008.
• [2] R.J. Fruehan, The making, shaping and treating of steel, Steelmaking and Refining Volume, 11th Edition, AISE Steel Foundation, Pitts burgh, 2010, 768.
• [3] K. Michalek, L. Camek, Z. Piegza, V. Pilka, J. Moravka, Use of industrially produced synthetic slag at Trinecke Zelezarny, a.s., Archives of Metallurgy and Materials 55/4 (2010) 1159-1165.
• [4] K. Gryc, K. Stransky, K, Michalek, Z. Winkler, J. Moravka, M. Tkadleckova, L. Socha, J. Bazan, J. Dobrovská, S. Zla, A study of the high-temperature interaction between synthetic slags and steel, Materials and Technology 46/4 (2012) 403-406.
• [5] L. Socha, J. Bazan, P. Machovcak, A. Opler, P. Styrnal, J. Melecky, Influence of briquetting fluxing agents on desulphurization of steel during secondary metallurgy treatment, Hutnicke Listy LXV/2(2012) 8-13 (in Czech).
• [6] M. Allibert, et al. Slag atlas, Dusseldorf, Verein Stahleisen GmbH, 1995, 616.
• [7] B. Bulko, J. Kijac, M. Domec, Optimalization slag composition in ladle furnace considering to effective steel desulfurization, Acta Metallurgica Slovaca 15/2 (2009) 93-99.