PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Examples of Simulation of the Alloying Elements Effect on Austenite Transformations During Continuous Cooling

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The article shows examples of simulation of the chemical composition effect on austenite transformation during continuous cooling. The calculations used own neural model of CCT (Continuous Cooling Transformation) diagrams describing austenite transformations that occur during continuous cooling. The model allows to calculate a CCT diagrams of structural steels and engineering steels based on chemical composition of steel and austenitizing temperature. Examples of simulation shown herein are related to the effect of selected elements on the temperatures of phase transformations, hardness and volume fraction of ferrite, pearlite, bainite and martensite in steel.
Słowa kluczowe
Twórcy
  • Silesian University of Technology, Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, 18A Konarskiego Str., 44-100 Gliwice, Poland
Bibliografia
  • [1] J.C. Zhao, M.R. Notis, Mater. Sci. Eng. 15, 135-207 (1995).
  • [2] M. Opiela, B. Grzegorczyk, Thermo-mechanical treatment of forged products of Ti-V-B microalloyed steel, Metal’2013 Conference Proceedings, Brno (2013).
  • [3] A. Grajcar, M. Opiela, Arch. Mater. Sci. Eng. 32 (1), 13-16 (2008).
  • [4] A. Grajcar, M. Morawiec, W. Zalecki, Metals 8, 1028-1039 (2018), DOI:10.3390/met8121028.
  • [5] J. Trzaska, A. Jagiełło, L.A. Dobrzański, Arch. Mater. Sci. Eng. 39, 13-20 (2009).
  • [6] V. Colla, M. Desanctis, A. Dimatteo et al., Metall. and Mat. Trans. A 42, 2781-2793 (2011), DOI:10.1007/s11661-011-0702-3.
  • [7] C. Capdevila, Neural networks modeling of phase transformations in steels, in: E. Pereloma, D.V. Edmonds (Eds.) Phase Transformations in Steels, Woodhead Publishing (2012), DOI: 10.1533/9780857096111.3.464.
  • [8] P.J. Van der Wolk, Modelling CCT-Diagrams of Engineering Steels Using Neural Networks, Delft University Press, Delft (2001).
  • [9] F. Nurnberger, M. Schaper, F.W. Bach, J. Mozgova, K. Kuznetsov, A. Halikova, O. Perederieieva, Adv. Mater. Sci. Eng. 1, 1-10 (2009), DOI: 10.1155/2009/582739.
  • [10] N. Saunders, Z. Guo, X. Li, A.P. Miodownik, J.P. Schillé, JOM 55(12), 60-65 (2003).
  • [11] J. Trzaska, Prediction methodology for the anisothermal phase transformation curves of the structural and engineering steels, Silesian University of Technology Press, Gliwice (2017), (in Polish).
  • [12] N. Isasti, P.M. Garcia-Riesco, D. Jorge-Badiola, M. Taheri, B. Lopez, P. Uranga, ISIJ Int. 55 (9), 1963-1972 (2015), DOI: 10.2355/isijinternational.ISIJINT-2015-036.
  • [13] X. Geng, H. Wang, W. Xue, S. Xiang, H. Huang, L. Meng, G. Ma, Comp Mater Sci 171, (2020), DOI: 10.1016/j.commatsci.2019.109235 (in press).
  • [14] S. Chakraborty, P.P. Chattopadhyay, S.K. Ghosh, S. Datta, Appl. Soft. Comput. 58, 297-306 (2017), DOI: 10.1016/j.asoc.2017. 05.001.
  • [15] M. Rahaman, W. Mu, J. Odqvist, P. Hedstrom, Metall. Mater. Trans. A 50A, 2082-2091 (2019), DOI: 10.1007/s11661-019-05170-8.
  • [16] G.F. Vander Voort (Ed.), Atlas of Time-Temperature Diagrams for Irons and Steels, ASM International (2004).
  • [17] G.E. Totten, M.A.H. Howes (Eds.), Steel Heat Treatment Handbook, Marcel Dekker Inc., New York (1997).
  • [18] J. Pacyna, Chemical composition and steel structures design, AGH Publishers, Cracow (1997) (in Polish).
  • [19] J. Wang, P.J. Van Der Wolk, S. Van Der Zwaag, ISIJ Int. 39, 1038-1046 (1999).
  • [20] J. Zhao, Z. Jiang, J. Soo. Kim, C. Soo. Lee, Mater. Design 49, 252-258 (2013), DOI: 10.1016/j.matdes.2013.01.056.
  • [21] B. Pawłowski, P. Bała, R. Dziurka, The effect of alloying elements on the temperature range of pearlite to austenite transformation in low alloy hypoeutectoid steels, Metal’2013 Conference Proceedings, Brno (2015).
  • [22] J. Trzaska, Arch. Metall. Mater. 63 (4), 2009-2015 (2018), DOI: 10.24425/amm.2018.125137.
  • [23] A.A. Gorni, Steel Forming And Heat Treating Handbook, www.gorni.eng.br/e/Gorni_SFHTHandbook.pdf, accessed: 23.10.2019
  • [24] S.M.C. Van Bohemen, J. Mater. Sci. Technol. 28 (4), 487-495 (2012), DOI: 10.1179/1743284711Y.0000000097.
  • [25] Y.K. Lee, J. Mater. Sci. Lett. 21 (16), 1253-1255 (2002).
  • [26] K.W. Andrews, Journal of the Iron and Steel Institute 203, 721-727 (1965).
  • [27] W. Sitek, Trans. Famena 34 (3), 39-46 (2010).
  • [28] L.A. Dobrzański, T. Tański, J. Trzaska, Mater. Sci. Forum 638, 1498-1493 (2010), DOI: 10.4028/www.scientific.net/MSF.638-642.1488.
  • [29] B. Smoljan, D. Iljkić, L. Pomenić, Int. J. Microstruct. Mater. Prop. 8 (1/2), 97-112 (2013)
Uwagi
1. This publication was financed by the Ministry of Science and Higher Education of Poland as the statutory financial grant of the Faculty of Mechanical Engineering SUT.
2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-698d6f69-7992-4ac1-a193-af160cd5ac4b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.