The analysis of the impact of vibrations on noisiness of the mechanical system

• Autorzy: Krajňák J. , Homišin J. , Grega R. , Urbanský M.
• Języki publikacji: EN

Abstrakty

EN

The article describes the mechanical system developed at our department. It examines shaft couplings and their impact of torsional oscillation and vibrations on noisiness of the mechanical system. The noisiness of the mechanical system is compared with the vibrations measured in a given mechanical system. The article also presents the apparatus used for measurements. Every device is described in detail and highlights its use in practice. These devices were used for measurements in the laboratory and the results of the measurements are shown in the graphs. From the results, we can evaluate that vibration and noisiness are closely related. A detailed evaluation of the changes of individual values using a variety of shaft couplings is summarized at the end of the article.

Słowa kluczowe

EN

flexible shaft coupling; mechanical system; noisiness; gearbox; electric motor

PL

sprzęgło elastyczne; układ mechaniczny; hałas; przekładnia zębata; silnik elektryczny

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2016
• Tom: Vol. 17, No. 3
• Strony: 21--26
• Opis fizyczny: Bibliogr. 18 poz., fot., wykr.

Twórcy

autor

Krajňák J.

• Technical University, Faculty of Mechanical Engineering Letná 9, 042 00 Košice, Slovak Republic

autor

Homišin J.

• Technical University, Faculty of Mechanical Engineering Letná 9, 042 00 Košice, Slovak Republic

autor

Grega R.

• Technical University, Faculty of Mechanical Engineering Letná 9, 042 00 Košice, Slovak Republic

autor

Urbanský M.

• Technical University, Faculty of Mechanical Engineering Letná 9, 042 00 Košice, Slovak Republic

Bibliografia

• [1] Homišin, J.: Research and Application of Universal Regulation System in Order to Master the Source of Mechanical Systems Excitation - 2014. In: Zeszyty Naukowe Politechniki Śląskiej seria: Transport. Gliwice: Wydawnictwo Politechniki Śląskiej, 2014 Vol. 84, no. 1907, p. 7-12.
• [2] Kaššay, P., Homišin, J., Čopan, P., Urbanský, M.: Verification of Torsional Oscillating Mechanical System Dynamic Calculation Results - 2014. In: Zeszyty naukowe Politechniki Śląskiej: seria: Transport. - Gliwice : Wydawnictwo Politechniki Śląskiej, 2014 Vol. 1907, no. 84 (2014), p. 29-34.
• [3] Homišin, J., Čopan, P., Urbanský, M.: Experimental determination of characteristic properties of selected types of flexible shaft couplings. In: Zeszyty Naukowe Politechniki Śląskiej: Transport 81, 2013, č. 1896, s. 51-57.
• [4] B. Łazarz, G. Wojnar, H. Madej, P. Czech.: Evaluation of gear power losses from experimental test data and analytical methods. ISSN 1392 - 1207. Žurnale "Mechanika". 2009. Nr.6(80). Kauno Technologijos Universitetas, Lietuva, pp. 56-63.
• [5] Figlus T., Konieczny Ł., Burdzik R., Czech P.: Assessment of diagnostic usefulness of vibration of the common rail system in the diesel engine. International Conference “VIBROENGINEERING”. Katowice 14.10-15.10.2015. Vibroengineering Procedia. October 2015, Vol. 6. p. 185-189.
• [6] Wojnar G, Homik W. Reduction of the amplitudes of selected components of the frequency spectrum of momentary velocity of the crankshaft of the internal combustion engine piston through the use of torsional vibration dampers. Vibroengineering Procedia 2015. International Conference on Vibroengineering - 2015, Katowice, Poland. 2015; Vol. 6: 83 – 86.
• [7] Jakubovičová L., Kopas P., Handrik M., Vaško M.: Computational and experimental analysis of torsion and bending loading of specimen, IN-TECH 2010, International Conference on Innovative Technologies, Prague, 2010., p. 395-400.
• [8] Czech P, Wojnar G, Burdzik R, Konieczny Ł, Warczek J. Application of the discrete wavelet transform and probabilistic neural networks in IC engine fault diagnostics. Journal of Vibroengineering. 2014; Volume 16: 1619-1639.
• [9] Vaško M., Guran A., Jakubovičová L., Kopas P.: 2013, Determination of Contact Stress Depending on the Measure Loading of the Roller Bearing NU220, In: Communications, Vol. 15, No. 2, p. 88-94.
• [10] Homišin, J., Urbanský, M., Kaššay, P.: Investigation of various factors influence on dynamic load of mechanical system by pneumatic coupling application, 2012. In: Zeszyty Naukowe Politechniki Śląskiej. Vol. 76, no. 1864, p. 13-18.
• [11] Neupauer, P.: Introduction to static optimization of mechanical drive systems based on monitoring - 2009. In: Transactions of the Universities of Košice. Č. 3 (2009), s. 25-28.
• [12] Figlus T., Konieczny Ł., Burdzik R., Czech P.: The effect of damage to the fuel injector on changes of the vibroactivity of the diesel engine during its starting. International Conference “VIBROENGINEERING”. Katowice 14.10-15.10.2015. Vibroengineering Procedia. October 2015, Vol. 6., p. 180-184.
• [13] Sapietova, A., Saga, M., Novak, P.: Design and Application of Multi-software Platform for Solving of Mechanical Multi-body System Problems, Conference: 9th International Conference on Mechatronics Location: Warsaw, POLAND Date: SEP 21-24, 2011, Sponsor(s): Warsaw Univ Technol, Fac. Mechatro. MECHATRONICS: RECENT TECHNOLOGICAL AND SCIENTIFIC ADVANCES.
• [14] Sága, M., Vaško, M., Pecháč, P.: Chosen Numerical Algorithms for Interval Finite Element Analysis. In Procedia Engineering, Vol. 96, 2014, pp. 400–409, ISSN 1877-7058.
• [15] Vaško, M., Vaško, A.: Correlation between Charge Composition and Fatigue Properties of Nodular Cast Irons. In Applied Mechanics and Materials, Vol. 474, 2014, pp. 291-296.
• [16] Zapomĕl, J, Dekýš, V., Ferfecki, P., Sapietová, A., Sága, M., Žmindák, M.: Identification of Material Damping of a Carbon Composite Bar and Study of Its Effect on Attenuation of Its Transient Lateral Vibrations, International Journal Of Applied Mechanics Volume: 7 Issue: 6 Article Number: 1550081 Published: DEC 2015.
• [17] Bosak, M., Rovnak, M., Chovancova, J., Wessely, E.: Environmental education at the faculty of mechanical engineering technical university of Košice, Annals of DAAAM for 2007 & proceedings of the 18th International DAAAM Symposium "Intelligent Manu-facturing & Automation: Focus on Creativity, Responsibility, and Ethics of Enginees. - Vienna: DAAAM International, 2007 2 p.
• [18] Grega, R., (et al.): The chances for reduction of vibrations in mechanical system with low-emission ships combustion engines - 2015. In: International Journal of Maritime Engineering. Vol. 157, no. A4 (2015), p. 235-240.