Characteristic of core manufacturing process with use of sand, bonded by ecological friendly nonorganic binders

• Autorzy: Fedoryszyn A. , Dańko J. , Dańko R. , Asłanowicz M. , Fulko T. , Ościłowski A.
• Języki publikacji: EN

Abstrakty

EN

Mechanization of the process of core making with the use of inorganic and organic binders is based, almost solely, on core blowing machines. Presently the core blowing machines are equipped with tools and devices that allow for application of different technologies of core making. Cold-box, hot-box and warm-air technologies require that core blowing machines shall be additionally equipped with either core-box pre-heating system or gas purging and neutralization system, or hot air purging systems. Considering the possibility of using varied, the most advantageous technologies of core making, the production of universal core blowing machines equipped with replaceable devices has been undertaken in Poland. The universal core blowing systems allow for mechanization of core making process also with the use of sand, bonded by modern, eco-friendly binder systems. The paper presents selected results-based evaluation of core blowing process showing the scope of conducted design and implementation works.

Słowa kluczowe

EN

mechanization of foundry proces; automation of foundry proces; core blowing machine; casting core; inorganic binder

PL

mechanizacja procesu odlewniczego; automatyzacja odlewnictwa; maszyna odlewnicza; rdzeń odlewniczy; spoiwo nieorganiczne

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2013
• Tom: Vol. 13, iss. 3
• Strony: 19--24
• Opis fizyczny: Bibliogr. 7 poz., rys., wykr.

Twórcy

autor

Fedoryszyn A.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 str., 30-059 Kraków, Poland

autor

Dańko J.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 str., 30-059 Kraków, Poland

autor

Dańko R.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 str., 30-059 Kraków, Poland

autor

Asłanowicz M.

• Ferro-Masz T. Fulko i Wspólnicy Sp. J., Przybyszewskiego 176, Łódź, Poland

autor

Fulko T.

• Ferro-Masz T. Fulko i Wspólnicy Sp. J., Przybyszewskiego 176, Łódź, Poland

autor

Ościłowski A.

• Ferro-Masz T. Fulko i Wspólnicy Sp. J., Przybyszewskiego 176, Łódź, Poland

Bibliografia

• [1] Lewandowski, J.L. (1997). Materials for casting moulds. Kraków: Akapit.
• [2] Dańko, J., Fedoryszyn, A. (1979). Design Assumption of the core box for manufacturing cores with the use of WZ technology and supervision of preliminary performance test. Ordering party: Company "DEFKA” – Dzierżoniów. Expertise No. 1159/Rz. (made by Group of experts from STOP The Polish Foundrymen’s Association).
• [3] Holtzer, M. (2012). Technologies of moulding and core sands and environmental protection.In III Conference of Hüttenes – AlbertusPolskaMould and core materials – theory and industrial practice (pp. 19) Zakopane, Poland.
• [4] Holtzer, M., Grabowska, B. (2008). Modern sand moulds with inorganic binder. In Conference Technical’2008 (pp. 93-98). NowaSól, Poland.
• [5] Loechte, K. (2012). Serial production of cylinder head cores with the use of inorganic binder. In III Conference of Hüttenes – AlbertusPolskaMould and core materials – theory and industrial practice (pp. 77) Zakopane, Poland.
• [6] Bieda, S. (2006). CORDIS inorganic binder system – properties and experience. In IX conference Technical’2006 (pp. 63-71). Nowa Sól, Poland.
• [7] Hüttenes – Albertus Data sheets; www. huettenes-albertus.pl.